2012 NISSAN X-TRAIL brake light


> (GLW    0RGHO 7$@
5-26
Starting anddriving
. Always usetires ofthe same type,size,brand,
construction (bias,bias-belted orradial) ,and
tread pattern onallfour wheels. Installtirechains
on the front wheels whendriving onslippery roads
and drive carefully .
. Besure tocheck thebrakes immediately after
driving inmud orwater. (SeeªBrake systemº (P.5-
57) .)
. Whenever youdrive off-road throughsand,mudor
water asdeep asthe wheel hub,more frequent
maintenance mayberequired. Fordetails, referto
ªMaintenance foroff-road drivingºinaseparate
maintenance booklet.
. Avoid parking yourvehicle onsteep hills.Ifyou get
out ofthe vehicle anditrolls forward, backward or
sideways, youcould beinjured.
TIRES OF4WD MODEL
T32A130 827-AE5C0 353-CEE0-4F0C-8B42-DD14B0 A90107
CAUTION:
. Always usetires ofthe same size,brand,
construction (bias,bias-belted orradial) ,
and tread pattern onallfour wheels. Failure
to do somay result inacircumference
difference betweentiresonthe front and
rear axles which willcause excessive tire
wear andmay damage thetransmission,
transfer caseandrear differential gears.
. Only usespare tiresspecified foreach 4WD
model.
If excessive tirewear isfound, itis recommended that
all four tires bereplaced withtires ofthe same size,
brand, construction andtread pattern. Thetire
pressure andwheel alignment shouldalsobechecked
and corrected asnecessary .Contact aNISSAN
dealer.
Snow tires
T32A1308 27-786C9A7 D-5F2C-4C44-8252-7577B2315AD6
If you install snowtires,theymust alsobethe same
size, brand, construction andtread pattern onallfour
wheels.
Tire inflation pressure
T32A130827-0 2F5E13F-EB84-4678-B8E3-01C847020459
Check thepressures inall tires, including thespare,
with agauge periodically whenataservice station.
Adjust tothe specified pressureifnecessary .Tire
pressures areshown onthe tire placard.
Tire rotation
T32A130 827-BCA9A BF3-4A1A-42 5E-8276-807FAAD0A08E
NISSAN recommends thattires berotated every5,000
km (3,000 miles).Do not include thespare tireinthe
tire rotation.
Tire chain
T32A130 827-61205 7E2-0991-4 824-9088-F4 4BB593B9BC
Tire chains mustbeinstalled onlyonthe front
wheels andnotonthe rear wheels.
Do not drive withtirechains onpaved roadswhich are
clear ofsnow .Driving withchains insuch conditions
can cause damage tothe various mechanisms ofthe
vehicle duetosome overstress.
GUID-282 AEC18-44 35-4758-87 F0-FE282A2B8D35
Except forEurope: Vehicle Dynamic Control
(VDC) system
For Europe: Electronic StabilityProgram (ESP)
system
WARNING:
. The VDC/ESP systemisdesigned tohelp the
driver maintain stabilitybutdoes notpre-
vent accidents duetoabrupt steering opera-
tion athigh speeds orby careless or
dangerous drivingtechniques. Reducevehi-
cle speed andbeespecially carefulwhen
driving andcornering onslippery surfaces
and always drivecarefully.
. Donot modify thevehicle's suspension. If
suspension partssuchasshock absorbers,
struts, springs, stabilizer bars,bushings and
wheels arenot NISSAN recommended for
your vehicle orare extremely deteriorated,
the VDC/ESP systemmaynotoperate
properly. Thiscould adversely affectvehicle
handling performance, andtheVDC/ESP
warning light
may illuminate.
. Ifbrake related partssuchasbrake pads,
rotors andcalipers arenot NISSAN recom-
mended orare extremely deteriorated, the
VDC/ESP systemmaynotoperate properly
and theVDC/ESP warninglight
may
illuminate.
. Ifengine control related partsarenot
NISSAN recommended orare extremely
deteriorated, theVDC/ESP warninglight
may illuminate.
. When driving onextremely inclinedsurfaces
such ashigher banked corners, theVDC/
ESP system maynotoperate properly and
VEHICLE DYNAMIC CONTROL
(VDC)/ELECTR ONICSTABILITY
PROGRAM (ESP)SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
the VDC/ESP warninglight
may illumi-
nate. Donot drive onthese typesofroads.
. When driving onanunstable surfacesuchas
a turntable, ferry,elevator orramp, theVDC/
ESP warning light
may illuminate. This
is not amalfunction. Restarttheengine after
driving ontoastable surface.
. Ifwheels ortires other thantheNISSAN
recommended onesareused, theVDC/ESP
system maynotoperate properly andthe
VDC/ESP warninglight
may illuminate.
. The VDC/ESP systemisnot asubstitute for
winter tiresortire chains onasnow covered
road.
The Vehicle Dynamic Control(VDC)/Electronic Stabi-
lity Program (ESP)system usesvarious sensors to
monitor driverinputs andvehicle motion. Undercertain
driving conditions, theVDC/ESP systemhelpsto
perform thefollowing functions.
. Controls brakepressure toreduce wheelslipon
one slipping drivewheel sopower istransferred to
a non slipping drivewheel onthe same axle.
. Controls brakepressure andengine outputto
reduce drivewheel slipbased onvehicle speed
(traction controlfunction) .
. Controls brakepressure atindividual wheelsand
engine outputtohelp thedriver maintain controlof
the vehicle inthe following conditions:
Ð understeer (vehicletendstonot follow the
steered pathdespite increased steeringinput)
Ð oversteer (vehicletendstospin duetocertain
road ordriving conditions) .
The VDC/ESP systemcanhelp thedriver tomaintain
control ofthe vehicle, butitcannot prevent lossof
vehicle control inall driving situations. When
theVDC/ESP systemoperates, theVDC/ESP
warning light
in the meter flashes sonote the
following:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp the
vehicle onthe steered path.
. You may feelapulsation inthe brake pedal and
hear anoise orvibration fromunder thehood. This
is normal andindicates thattheVDC/ESP system
is working properly.
. Adjust yourspeed anddriving tothe road
conditions.
If a malfunction occursinthe system, theVDC/ESP
warning light
illuminates inthe meter. TheVDC/
ESP system automatically turnsoff.
The VDC/ESP OFFswitch isused toturn offthe VDC/
ESP system. TheVDC/ESP offindicator light
illuminates toindicate theVDC/ESP systemisoff.
When theVDC/ESP OFFswitch isused toturn offthe
system, theVDC/ESP systemstilloperates toprevent
one drive wheel fromslipping bytransferring powerto
a non slipping drivewheel. TheVDC/ESP warninglight
flashes ifthis occurs. Allother VDC/ESP
functions areoffand theVDC/ESP warninglight
will not flash. TheVDC/ESP systemisauto-
matically resettoon when theignition switchisplaced
in the ªOFFº position thenback tothe ªONº position.
See ªVehicle Dynamic Control(VDC)warning light/
Electronic StabilityProgram (ESP)warning lightº(P.2-
16) and ªVehicle Dynamic Control(VDC)offindicator
light/Electronic StabilityProgram (ESP)offindicator
lightº (P.2-19) .
The computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine and
move thevehicle forward orinreverse ataslow speed.
When theself-test occurs,youmay hear aªclunkº noise
and/or feelapulsation inthe brake pedal. Thisis
normal andisnot anindication ofamalfunction.
VEHICLE DYNAMIC CONTROL (VDC)/
ELECTRONIC STABILITY PROGRAM (ESP)
S YSTEM OFFSWIT CH
GUID-6741A 6E6-5C87-4519-ADE2- B1D05929FA1D
SSD1149
The vehicle shouldbedriven withtheVehicle Dynamic
Control (VDC)/Electronic StabilityProgram (ESP)
system ONformost driving conditions.
When thevehicle isstuck inmud orsnow ,the VDC/
ESP system reduces theengine outputtoreduce
wheel spin.Theengine speedwillbereduced evenif
the accelerator isdepressed tothe floor. Ifmaximum
engine powerisneeded tofree astuck vehicle, turn
the VDC/ESP systemoff.
T o turn offthe VDC/ESP system,pushtheVDC/ESP
OFF switch. TheVDC/ESP offindicator light
will
illuminate.
Push theVDC/ESP OFFswitch againorrestart the
engine toturn ONthesystem.
Starting anddriving
5-27
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
JVS0403X
When theActive Engine Brakeisoperated atcorners
and theªChassis Controlºmodeisselected inthe trip
computer, theActive Engine Brakegraphics areshown
in the vehicle information display.See ªTrip computerº
(P .2-34) formore information.
If the chassis controlwarning message appearsinthe
vehicle information display,it may indicate thatthe
Active Engine Brakeisnot functioning properly.Have
the system checked byaNISSAN dealerassoon as
possible.
WARNING:
The Active Engine Brakemaynotbeeffective
depending onthe driving condition. Alwaysdrive
carefully andattentively.
When theActive Engine Brakeisoperating, theneedle
of the tachometer willrise upand youmay hear an
engine noise.Thisisnormal andindicates thatthe
Active Engine Brakeisoperating properly.
ACTIVE RIDECONTROL
GUID-EE92B5 7E-E6A7-47CC-8CBE-7 38B0F9EF222
This system senses upperbodymotion basedon
wheel speed information andcontrols enginetorque
and four wheel brakepressure toenhance ridecomfort
in effort torestrain uncomfortable upperbodymove-
ment. Thissystem comeintoeffect above 40km/h (25
MPH) .When theVDC/ESP OFFswitch isused toturn
off the VDC/ESP system,theActive RideControl is
also turned off.Engine torquecontrol isavailable for
MR20 andQR25 engines only
.
JVS0398X
When thebrake control ofthe Active RideControl is
operated andtheªChassis Controlºmodeisselected
in the trip computer, theActive RideControl graphics are
shown inthe vehicle information display.See ªTrip
computerº (P.2-34) formore information.
If the chassis controlwarning message appearsinthe
vehicle information display,it may indicate thatthe
Active RideControl isnot functioning properly.Have
the system checked byaNISSAN dealerassoon as
possible.
When theActive RideControl isoperating, youmay
hear noise andsense slightdeceleration. Thisisnormal
and indicates thattheActive RideControl isoperating
properly .
Starting anddriving
5-29
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-30
Starting anddriving
GUID-778037 C2-4069-417C-90C0-40F4092CEE51
WARNING:
. Never relysolely onthe hillstart assist
system toprevent thevehicle frommoving
backward onahill. Always drivecarefully
and attentively. Depressthebrake pedal
when thevehicle isstopped onasteep hill.
Be especially carefulwhenstopped onahill
on frozen ormuddy roads.Failure toprevent
the vehicle fromrolling backwards may
result inaloss ofcontrol ofthe vehicle and
possible seriousinjuryordeath.
. The hillstart assist system isnot designed to
hold thevehicle atastandstill onahill.
Depress thebrake pedalwhenthevehicle is
stopped onasteep hill.Failure todo somay
cause thevehicle toroll backwards andmay
result inacollision orserious personal
injury.
. The hillstart assist system maynotprevent
the vehicle fromrolling backwards onahill
under allload orroad conditions. Alwaysbe
prepared todepress thebrake pedalto
prevent thevehicle fromrolling backwards.
Failure todo somay result inacollision or
serious personal injury.
The hillstart assist system automatically keepsthe
brakes applied tohelp prevent thevehicle fromrolling
backwards inthe time ittakes thedriver torelease the
brake pedalandapply theaccelerator whenthevehicle
is stopped onahill.
The hillstart assist system willoperate automatically
under thefollowing conditions:
. Thetransmission isshifted toaforward orreverse
gear. .
The vehicle isstopped completely onahill by
applying thebrake.
The maximum holdingtimeis2seconds. After2
seconds thevehicle willbegin toroll back andthehill
start assist system willstop operating completely .
The hillstart assist system willnotoperate whenthe
transmission isshifted tothe ªNº (Neutral) orªPº (Park)
position oron aflat and level road.
When theVehicle Dynamic Control(VDC)/Electronic
Stability Program (ESP)warning lightilluminates inthe
meter, thehillstart assist system willnotoperate. (See
ªV ehicle Dynamic Control(VDC)warning light/Elec-
tronic Stability Program (ESP)warning lightº(P.2-16) .)
T32A130 827-BF2178 22-AA17-4F95-BAE1-6 2EB7B0C2508
WARNING:
. Never relysolely onthe hilldescent control
system tocontrol vehiclespeedwhendriv-
ing onsteep downhill grades.Alwaysdrive
carefully whenusing thehilldescent control
system anddecelerate thevehicle speedby
depressing thebrake pedalifnecessary. Be
especially carefulwhendriving onfrozen,
muddy orextremely steepdownhill roads.
Failure tocontrol vehiclespeedmayresult in
a loss ofcontrol ofthe vehicle andpossible
serious injuryordeath.
. The hilldescent controlsystemmaynot
control thevehicle speedonahill under all
load orroad conditions. Alwaysbeprepared
to depress thebrake pedaltocontrol vehicle
speed. Failure todo somay result ina
collision orserious personal injury.
CAUTION:
When thehilldescent controlsystemoperates
continuously foralong time, thetemperature of
the Vehicle Dynamic Control(VDC)/Electronic
Stability Program (ESP)system actuator may
increase andthehilldescent controlsystemmay
be temporarily disabled(thehilldescent control
system onindicator lightwillblink) .If the
indicator lightdoes notcome oncontinuously
after blinking, stopusing thesystem.
When thehilldescent controlsystem isactivated, it
automatically appliessmooth brakestocontrol speed
on asteep andslippery descent oroff the road without
brake oraccelerator operation.
The hilldescent controlsystem helpsmaintain vehicle
speed whendriving under25km/h (15MPH) ona
HILL START ASSIST SY STEM HILL
DESCEN TCONTROL SY STEM
(if equipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
steep descent thatengine braking aloneinFour-Wheel
Drive (4WD) modecannot control thespeed.
When driving forward onthe descent, thespeed can
be adjusted bythe brake oraccelerator operation.The
system maintains thespeed forreverse drivingonthe
descent.
HILL DESCENT CONTROL SWITCH
T32A130827- A22A42E7-41B 2-4114-88DB-9E1B7 BDE94E3
JVS0402X
When additional brakingisrequired onsteep downhill
roads, activate thehilldescent controlsystem by
pushing thehilldescent controlswitchon.
When thehilldescent controlsystem isactivated, the
hill descent controlsystem onindicator light
will
illuminate. (SeeªHilldescent controlsystem on
indicator lightº(P.2-18) .)Also, thestop/tail lights
illuminate whilethehilldescent controlsystem is
applying thebrakes tocontrol thevehicle speed.
T o activate thehilldescent controlsystem, satisfyallof
the following conditions:
. Shift thetransmission tothe forward orreverse
gear.
. Turn the4WD mode switch tothe LOCK mode
and drive thevehicle ataspeed under25km/h
(15 MPH) . .
Push thehilldescent controlswitchtothe ªONº
position.
If the accelerator orbrake pedal isdepressed whilethe
hill descent controlsystem ison, the system willstop
operating temporarily .As soon asthe accelerator or
brake pedal isreleased, thehilldescent controlsystem
begins tofunction againifthe hilldescent control
operating conditions arefulfilled.
The hilldescent controlsystem onindicator lightblinks
if the hilldescent controlswitchison and allconditions
for system activation arenot met, orifthe system
becomes disengaged forany reason.
When thevehicle speedexceeds 40km/h (25MPH) ,
the 4WD mode indicator lightchanges fromLOCK to
AUT O.Once thespeed decreases to25 km/h (15
MPH) ,turn the4WD mode switch toLOCK again to
turn onthe hilldescent controlsystem.
T o turn offthe hilldescent controlsystem, pushthehill
descent controlswitchtothe OFF position.
GUID-89 EA2F2C-B11 E-4266-AE54-208D2C5 5EC10
The Blind SpotWarning (BSW) systemhelpsalertthe
driver ofother vehicles inadjacent laneswhen
changing lanes.
The Lane Departure Warning (LDW) system helps
alert thedriver whenthevehicle istraveling closeto
either theleftorthe right ofatraveling
lane.
JVS0390X
The BSW/LDW systemsusetherearview cameraunit
*
1
with automatic washerandblower.
WARNING:
. The BSW system isnot areplacement for
proper driving procedure andisnot de-
signed toprevent contactwithvehicles or
objects. Whenchanging lanes,always use
the side andrear mirrors andturn andlook
in the direction youwillmove toensure itis
safe tochange lanes.Neverrelysolely on
the BSW system.
. The LDW system isonly awarning deviceto
help inform thedriver ofapotential unin-
tended lanedeparture. Itwill notsteer the
vehicle orprevent lossofcontrol. Itis the
driver's responsibility tostay alert, drive
safely, keepthevehicle inthe traveling lane,
Starting anddriving
5-31
BLIND
SPOTWARNING (BSW)/
LANE DEPARTURE WARNING (LDW)
S Y STEMS (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-44
Starting anddriving
CRUISE CONTROL OPERATIONS
T32A1308 27-4BD70 071-615A-4B E0-8E01-02D3FB02318A
The cruise control allowsdriving atspeeds above40
km/h (25MPH) without keeping yourfootonthe
accelerator pedal.
For gasoline enginemodels, thecruise control will
automatically becanceled ifthe vehicle slowsdown
more thanapproximately 13km/h (8MPH) below the
set speed.
For diesel engine models, thecruise control will
automatically becanceled ifthe vehicle speedslows
to less than approximately 35km/h (22MPH) .
Moving theshift lever tothe ªNº (Neutral) positionwill
cancel andtheCRUISE indicator willoff.
T urning oncruise control
T32A1308 27-D9A26350-0978 -4C2D-81F7 -A433A8DD2D61
Push theMAIN switch. TheCRUISE indicator inthe
vehicle information displaywillappear.
Setting cruising speed
T32A1308 27-C830EB 0E-975B-4C 65-891B-9EDAAA4D8E3 E
1. Accelerate tothe desired speed.
2. Push theCOAST/SET switchandrelease it.
3. Take your footoffthe accelerator pedal.
The vehicle willmaintain thesetspeed.
Passing anothervehicle:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Depress theaccelerator pedaltoaccelerate. After
releasing theaccelerator pedal,thevehicle willreturn
to the previously setspeed.
The vehicle maynotmaintain thesetspeed when
going upordown steep hills.Insuch cases, drive
without thecruise control. Resetting
toslower speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use anyone ofthe following methodstoreset toa
slower speed.
. Lightly tapthefoot brake pedal. When thevehicle
reaches thedesired speed,pushandrelease the
COAST/SET switch.
. Push andhold theCOAST/SET switch.Whenthe
vehicle reaches thedesired speed,release the
COAST/SET switch.
. Quickly pushandrelease theCOAST/SET switch.
This willreduce thevehicle speedbyabout 1km/h
or 1MPH.
Resetting tofaster speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use anyone ofthe following methodstoreset toa
faster speed.
. Depress theaccelerator pedal.Whenthevehicle
reaches thedesired speed,pushandrelease the
COAST/SET switch.
. Push andhold theACCELERA TE/RESUME
switch. Whenthevehicle reaches thedesired
speed, release theACCELERA TE/RESUME
switch.
. Quickly pushandrelease theACCELERA TE/
RESUME switch.Thiswillincrease thevehicle
speed byabout 1km/h or1MPH.
Resuming atpreset speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push andrelease theACCELERA TE/RESUME switch.
The vehicle willresume thelast setcruising speed
when thevehicle speedisover 40km/h (25MPH) .
Cancelling cruisingspeed
T32A130 827-D50DF32 4-B09E-4323-8AC9-3 5C0187CD15 A
Use anyone ofthe following methodstocancel theset
speed.
. Push theCANCEL switch.
. Tap the foot brake pedal.
. Push thecruise control MAINswitch. TheCRUISE
indicator willturn off.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
GUID-50A61 EEE-50E1-49 FC-B406-D1735C8B3E99
The forward emergency brakingsystemcanassist the
driver whenthereisarisk ofaforward collision withthe
vehicle aheadinthe travelling
lane.
JVS0435X
The forward emergency brakingsystemusesaradar
sensor
*
1
located atthe front ofthe vehicle to
measure thedistance tothe vehicle aheadinthe
travelling lane.
The forward emergency brakingsystemoperates at
speeds aboveapproximately 5km/h (3MPH) .
WARNING:
. The forward emergency brakingsystemisa
supplemental aidtothe driver. Itis not a
replacement forthe driver's attention to
traffic conditions orresponsibility todrive
safely. Itcannot prevent accidents dueto
carelessness ordangerous drivingtech-
niques.
. The forward emergency brakingsystem
does notfunction inall driving, traffic,
weather androad conditions.
S YSTEM OPERA TION
GUID-282 EFFD6-A2A3 -44A1-9162-36F52A814 BFD
The forward emergency brakingsystemwillfunction
when yourvehicle isdriven atspeeds aboveapproxi-
mately 5km/h (3MPH) .
If arisk ofaforward collision isdetected, theforward
emergency brakingsystemwillprovide thefirst
warning tothe driver byflashing theforward emer-
gency braking systemwarning lightandproviding an
audible warning.
If the driver applies thebrakes quickly andforcefully
after thewarning, andtheforward emergency braking
system detects thatthere isstill thepossibility ofa
forward collision, thesystem willautomatically increase
the braking force.
If the driver doesnottake action, theforward
emergency brakingsystemissuesthesecond visual
warning (red)andaudible warning. Ifthe driver
releases theaccelerator pedal,thenthesystem applies
partial braking.
If the risk ofacollision becomes imminent, theforward
emergency brakingsystemapplies harderbraking
automatically .
NO TE:
The vehicle's brakelightscomeonwhen braking
is performed bythe forward emergency braking
system.
Depending onvehicle speedanddistance tothe
vehicle ahead,aswell asdriving androadway
conditions, thesystem mayhelp thedriver avoida
forward collision ormay help mitigate theconse-
quences ifa collision shouldonebeunavoidable.
If the driver ishandling thesteering wheel,accelerating
or braking, theforward emergency brakingsystemwill
function laterorwill not function.
The automatic brakingwillcease underthefollowing conditions:
. When thesteering wheelisturned asfar as
necessary toavoid acollision.
. When theaccelerator pedalisdepressed.
. When thereisno longer avehicle detected ahead.
If the forward emergency brakingsystemhasstopped
the vehicle, thevehicle willremain atastandstill for
approximately 2seconds beforethebrakes are
released.
WARNING:
. The radar sensor doesnotdetect the
following objects:
Ð Pedestrians, animalsorobstacles inthe
roadway
Ð Oncoming vehicles
Ð Crossing vehicles
. The radar sensor hassome performance
limitations. Ifastationary vehicleisin the
vehicle's path,theforward emergency brak-
ing system willnotfunction whenthevehicle
is driven atspeeds overapproximately 80
km/h (50MPH) .
. The radar sensor maynotdetect avehicle
ahead inthe following conditions:
Ð Dirt, ice,snow orother material covering
the radar sensor.
Ð Interference byother radarsources.
Ð Snow orroad spray fromtravelling
vehicles.
Ð If the vehicle aheadisnarrow (e.g.
motorcycle) .
Starting anddriving
5-45
FORWARD
EMERGENCY BRAKIN G
S Y STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-46
Starting anddriving
Ð When driving onasteep downhill slope
or roads withsharp curves.
Ð When towing atrailer.
. Insome roadortraffic conditions, the
forward emergency brakingsystemmay
unexpectedly pushtheaccelerator pedalup
or apply partial braking. Whenacceleration
is necessary, continuetodepress theaccel-
erator pedaltooverride thesystem.
. Braking distances increaseonslippery sur-
faces.
. Excessive noisewillinterfere withthewarn-
ing chime sound, andthechime maynotbe
heard.
. The system isdesigned toautomatically
check thesensor's functionality, withincer-
tain limitations. Thesystem maynotdetect
some forms ofobstruction ofthe sensor
area ofthe front bumper suchasice, snow,
stickers, forexample. Inthese cases, the
system maynotbeable towarn thedriver
properly. Besure thatyoucheck, cleanand
clear thesensor areaofthe front bumper
regularly.
T urning theforward emergency brakingsys-
tem ON/OFF
GUID-91AA4 E9D-2919-400F-B632-6E 30412A721C
Perform thefollowing stepstoturn theforward
emergency brakingsystemONorOFF .
1. Using the
switches andtheENTER button
on the leftside ofthe steering wheel,selectthe
Settings menuinthe vehicle information display.
(See ªSettingsº (P.2-21) .)
2. Using the
switches andtheENTER button,
navigate tothe [Driver Assistance] menu,followed by
the [Driving Aids]menu.
3. Inthe [Driving Aids]menu, highlight the[Emer-
gency Brake] itemandusetheENTER buttonto
toggle between ON(enabled) orOFF (disabled) .
JVS0299X
When theforward emergency brakingsystemisturned
off, the forward emergency brakingsystemwarning
light (orange) willilluminate.
System temporarily unavailable
GUID-450 42812-084 F-4AD4-831 C-D92669CF 9587
Condition A:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theradar sensor picksupinterference from
another radarsource, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) andthedriver
assist system forward indicator (orange)willilluminate.
Action totake:
When theabove conditions nolonger exist,the
forward emergency brakingsystemwillresume auto-
matically . Condition
B:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thesensor areaofthe front bumper iscovered
with dirtorobstructed, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) willilluminate
and theªfront radarobstructionº warningmessage will
appear inthe vehicle information display.
Action totake:
If the warning light(orange) comeson,park thevehicle
in asafe location andturn theengine off.Check tosee
if the sensor areaofthe front bumper isblocked. Ifthe
sensor areaofthe front bumper isblocked, removethe
blocking material.Restarttheengine. Ifthe warning
light continues toilluminate, havetheforward emer-
gency braking systemchecked byaNISSAN dealer.
System malfunction
GUID-03AB 42D0-B4F4-4 D8F-9706-47A73CB97E06
If the forward emergency brakingsystemmalfunctions,
it will beturned offautomatically ,a chime willsound,
the forward emergency brakingsystemwarning light
(orange) willilluminate andthewarning message
[Malfunction] willappear inthe vehicle information
display .
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the warning light(orange) comeson,park thevehicle
in asafe location, turntheengine offand restart the
engine. Ifthe warning lightcontinues toilluminate, have
the forward emergency brakingsystemchecked bya
NISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD