2012 NISSAN MAXIMA warning

[x] Cancel search: warning

Page 390 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual 1. Power steering fluid pump
2. Generator
3. Air conditioner compressor
4. Crankshaft pulley
WARNING
Be sure the ignition switch is in the OFF or
LOCK position before servicing drive belt.
The engine

Page 391 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual WARNING
Be sure the engine and ignition switch are
off and that the parking brake is engaged
securely.
CAUTION
Be sure to use the correct socket to re-
move the spark plugs. An incorrect socket
can da

Page 393 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual Be careful not to let anything get into the washer
nozzle
A. This may cause clogging or improper
windshield washer operation. If something gets
into the nozzle, remove it with a needle or small
pin


Page 399 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual 4. Close the lid securely as illustratedCD.
5. Operate the buttons to check the operation.
See a NISSAN dealer if you need assistance for
replacement.
FCC Notice:
For USA:
This device complies with

Page 404 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual If you have a flat tire, see “Flat tire” in the
“In case of emergency” section of this
manual.
TIRE PRESSURE
Tire Pressure Monitoring System
(TPMS)
This vehicle is equipped with the Tire
Press

Page 405 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual ●Most tires naturally lose air over time.
● Tires can lose air suddenly when
driven over potholes or other objects
or if the vehicle strikes a curb while
parking.
The tire pressures should be chec

Page 411 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual 7The word “radial”
The word “radial” is shown if the tire has
radial structure.
8Manufacturer or brand name
Manufacturer or brand name is shown.
Other Tire-related Terminology
In addition to

Page 413 of 450

NISSAN MAXIMA 2012 A35 / 7.G Owners Manual Wheel nut tightening torque:83 ft-lb (112 N·m)
The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire rot