2012 NISSAN ALTIMA COUPE ECU

[x] Cancel search: ECU

Page 145 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual The interior light timer illuminates for a period of
time when a door is unlocked and the room light
switch is in the DOOR position.
The interior light can be turned off without waiting
by performing

Page 146 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual Locking doors
1. Place the ignition switch in the LOCK posi-tion.
2. Close all doors.
3. Press the
button on the Intelligent
Key.
4. The hazard warning lights flash twice and the horn beeps once.
5. A

Page 150 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual SymptomPossible CauseRemedy
When pushing the door handle request
switch to lock the door The outside chime sounds for approximately
2 seconds. The Intelligent Key is inside the vehicle or
trunk.
Carry

Page 152 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual CAUTION
Listed below are conditions or occur-
rences which will damage the Intelligent
Key:
●Do not allow the Intelligent Key, which
contains electrical components, to
come into contact with water o

Page 153 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual Locking doors
1. Place the ignition switch in the LOCK posi-tion.
2. Close all doors.
3. Press the
button on the Intelligent
Key.
4. The hazard warning lights flash twice and the horn beeps once.
5. A

Page 158 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual ●Closely supervise children when they
are around cars to prevent them from
playing and becoming locked in the
trunk where they could be seriously in-
jured. Keep the car locked, with the rear
seatba

Page 159 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual To open the trunk from the inside, pull the illumi-
nated release handle until the lock releases and
push up on the trunk lid. The release handle is
made of a material that glows in the dark after a
b

Page 180 of 454

NISSAN ALTIMA COUPE 2012 D32 / 4.G Owners Manual Press and hold thebutton for more than
two seconds to turn the display off. Press the
button again to turn the display on. When the shift selector is shifted into the R
(Reverse) position, the monitor