2012 MITSUBISHI LANCER EVOLUTION tire pressure

[x] Cancel search: tire pressure

Page 235 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual 3-148 Features and controls
3
NOTETo avoid the risk of damage to the tire inflation pressure
sensors, have any punctured tire repaired by an authorized
Mitsubishi Motors dealer. If the tire repair is

Page 236 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual Features and controls
3-149
3
Whenever the tires and wheels are replaced with 
new ones
N00532900179
If new wheels with new tire inflation pressure sensors are
installed, their ID codes must be progra

Page 271 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual 3-184 Features and controls
3Indicator light, warning light, and information screen display list
N00557700019
Indicator and warning light list
N00557800212
Type 1 Type 21- Position indicator →  P.3-

Page 277 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual 3-190 Features and controls
3
Immobilizer is registered. Refer to “Customer key programming 
(Except for vehicles sold in Canada)” on 
page 3-7.
Refer to “Customer F.A.S.T.-key program-
ming (E

Page 357 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual 4-2 Driving safety
4Fuel economy
N00628800107
Fuel economy is dependent on many factors. Your personal
driving habits can have a significant effect on your fuel use.
Several recommendations for achiev

Page 360 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual Driving safety
4-5
4 Vehicle preparation before driving
N00629000672
For a safer and more enjoyable trip, always observe the follow-
ing: Seat belts and seats Before starting the vehicle, make certai

Page 501 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual 6-10 For emergencies
6
NOTEThe chocks shown in the illustration do not come with
your vehicle. It is recommended that you purchase chocks
or blocks and keep them in the vehicle for use if needed. 
I

Page 508 of 618

MITSUBISHI LANCER EVOLUTION 2012 10.G Owners Manual For emergencies
6-17
6
9. Tighten the nuts in the order shown in the illustration until
each nut has been tightened to the torque listed here.
65 to 80 ft-lb (88 to 108 N•m)
10. Lower the jack all t
Page:   < prev 1-8 9-16 17-24 next >