2012 MITSUBISHI GALANT mileage

Outline of the System 1-4
Outline of the System
System Male or female voice guidance is available in 3
languages.
(English, French, Spanish)
 Trip information such as average speed,
average mileage, and current mileage can be
viewed.
(2-9)
 An alarm can be set for the driving time.
(2-15)
 Detailed settings can be made for vehicle
equipment.
(2-17)
 The vehicle maintenance timing can be
managed with the maintenance function.
(2-20)
 Environmental information such as the outside
air temperature, altitude, and air pressure can
be viewed.
(2-23)
 The schedule can be managed with the
calendar function.
(2-24)
Easy Operation Setting The touch panel enables easy operation.
 Time zone and daylight saving time settings are
available.
(2-14)
Destination Setting Addresses and nearby POIs can be easily
searched for and set as the destination.
(4-2)
 A route can be set for returning home.
(4-2)
 A new destination can be set from the 20
destinations that have been previously set.
(4-7)
Display Guidance The background can be set to any of 4 images. (2-12) POI icons can be displayed on the map. There
are 43 POI icon types.
(7-4)
 The menu and map colors can be changed.
(7-5)
 Markings can be displayed on the road on
which the vehicle is being driven.
(7-5)
Routing Detour routes can be set with specified
distances or streets to avoid.
(5-3)
 A route can be selected from 3 routes that have
different calculation conditions.
(5-5)
 Areas to avoid can be set.
(7-10)
Voice Guidance Guidance is given for the required information
at the optimum time.
(3-13)
 A male or female voice can be selected.
(7-1)

Trip 2-9
Operation of MMCS
Trip
Trip information can be viewed and set.
1 Display the Main Menu
2 Touch [Trip]
eng_507

eng_498
The trip screen is displayed.
The average speed, average mileage and current
mileage can be viewed.
NOTE Touch [Graph] to
view the average
speed and average
mileage as a
graph, measured in 5-minute units.
eng_496
 Touch [Manual] to change the reset mode to
“Manual Reset Mode”.
>>> “Reset Mode” (2-10)
 Touch [ ] or [ ] of “Page” to scroll through
the pages. 3 Touch [
] of “Page”

eng_495
The 2/3 trip screen is displayed.
The distance to empty, distance driven after
refueling and driving time can be viewed.
4 Touch [
] of “Page”

eng_492
The 3/3 trip screen is displayed.
The lap time can be measured. >>> “Lap Time” (2-11)

Trip 2-10
Reset Mode
Two reset modes are available:
- Auto Reset Mode automatically
resets the average speed and
average mileage, four hours after the
ignition switch is turned OFF.
- In Manual Reset Mode, you can
reset the items when desired.
Changing the Reset Mode
1 Display the 1/3 Trip screen
2 Touch [Manual]
eng_498

eng_497
“Auto Reset Mode” is changed to “Manual Reset
Mode”.NOTE Touch [Auto] to return to “Auto Reset Mode”.
 In “Manual Reset Mode”, touch [Reset] to reset
the vehicle speed and average mileage.
Driving Distance and Time
The distance to empty, distance driven
after refueling and driving time can be
viewed on the 2/3 Trip screen.
Distance to EmptyThe displayed distance to empty is calculated
from the current remaining fuel and the recent
average mileage.NOTE “---” is displayed when the distance to empty is
30 miles or less.Distance Driven After RefuelingDisplays automatically the distance driven after
refueling.
It is reset when the vehicle is refueled.Driving TimeMeasures the time from when the ignition switch
is turned “ON” to when it is turned “OFF”.
It is reset when the ignition switch is turned from
“OFF” to “ON”.

Trip 2-11
Operation of MMCS
Lap Time
Time, distance, speed and mileage
can be measured.
1 Display the 3/3 Trip screen
2 Touch [Start]
eng_492

Total Line
eng_545
The measurement starts. At this time, the speed
and mileage are being measured, so they are not
displayed.
3 Touch [Lap]

eng_546
The current measurement results are displayed in
“A”.NOTE Touch [Lap]
again and the
measurement
results displayed
in "A” are moved
to “B”.

eng_547
4 Touch [Stop]

eng_548
The measurements stop and the measurement
results are displayed in the total line.
NOTE Touch [Start] to restart the measurements from
where they stopped.
 The measurements stop if the ignition switch
is turned “OFF” during measurement. If this
happens, the measurements restart when the
ignition switch is turned “ON”. 5 Touch [Reset]

eng_549
All the measurement results are reset.

Setup 2-15
Operation of MMCS
Display UnitTouch [ ] or [ ] to set the units used by the
system.Trip
miles, mph, mpg Distance miles
Speed mph
Mileage mpg
Altitude ft
Air pressure inHg
km, km/h, km/L Distance km
Speed km/h
Mileage km/L
Altitude m
Air pressure kPa
km, km/h,
L/100kmDistance km
Speed km/h
Mileage L/100km
Altitude m
Air pressure kPaNOTE This item can also be set from the navi menu.
>>>“Unit Distance”(7-1)Temperature
Fahrenheit Set to Fahrenheit (°F).
Celsius Set to Celsius (°C).Operation SoundThe operation sound can be set to on or off.
[On] The operation sound is on.
[Off] The operation sound is off.
Touch PanelThe touch panel can be adjusted.
Touch [Adjust], and then set by following the
instructions on the screen.
eng_347
Alarm
The alarm can be set with the clock or
the driving time.
1 Display the Main Menu and
touch [Setup]
eng_507
2 Touch [Alarm]
eng_363
Continued on the Next Page