been carried out. Resetting the ASSYST
service
interval display without performing
the corresponding maintenance service
may result in engine damage and/or
damage to other vehicle parts that are not
covered by the limited warranty for new
vehicles. Tire rotation
Your vehicle's tires are a critical component
to overall vehicle performance and vehicle
stability. The useful life of tires will vary and
is proportional to tire type, speed rating,
ambient
conditions, tire loading, tire inflation
pressure, road surfaces, and individual
driving style. We therefore recommend
regularly checking the tires for wear and
correct tire pressure, and - if the tire
configuration allows - that the tires are
rotated regularly.
Tires can only be rotated on vehicles with the
same tire size on the front and rear axles.
If your vehicle's tire configuration allows for
tire rotation, tire rotation should be
performed in accordance with the
recommended intervals, or sooner at first
signs of irregular (uneven) tread wear. Tire
rotation recommendations will likely
necessitate a tire rotation at least at every Oil
Service Plus/maintenance service.
Single tires at rear If your vehicle is equipped with the same tire
dimensions,
tires can be rotated by observing
a front-to-rear rotation pattern that will
maintain the intended rotation (spinning)
direction of the tire (on unidirectional tires, an
arrow on the sidewall indicates the intended
rotation or spinning direction of the tire).
Double tires at the rear If your vehicle is fitted with tires of the same
size,
the tires on the front axle can be rotated
with the inner tires on the rear axle in pairs
so that the intended rotation (spinning) direction of the tires remain the same. If the
tread
pattern on the tires is not unidirectional,
the outer tires can be rotated from one side
to another on the rear axle. Diagram showing tire rotation for single and double
tires
This Maintenance Booklet contains a
practical tire rotation confirmation page,
which you can use to record the date and
mileage for every tire rotation (
Y page 5). Arduous operating conditions
The maintenance intervals have been
determined
so that the vehicle, under normal
operating conditions, should operate
properly between maintenance services.
Arduous operating conditions may require
that the following parts be replaced at shorter
intervals:
R INTERIOR FILTERS
For example, dust filter, recirculating air
filter, activated charcoal filter or
combination filter) are replaced as required
by the maintenance computer. Under
severe dust conditions, or if the climate
control is operated frequently in air
recirculation mode, the filters should be
replaced more frequently than indicated by
the maintenance computer.
R COOLANT
The coolant (water/anticorrosion/
antifreeze mixture) should be replaced at
the specified maintenance intervals. Introduction
5
Maintenance Booklet
Replacement of coolant may be required
more
frequently if coolant is not maintained
according to instructions and/or other
than approved anticorrosion/antifreeze
products for your vehicle are being used.
You can find coolant instructions under the
"Coolant" section of the vehicle Operator's
Manual. Contact an authorized Sprinter
dealer for a list of anticorrosion/antifreeze
products that are approved for your
vehicle. Wear items
The
maintenance computer recommends the
inspection of certain wear parts, however, it
cannot judge the condition of these wear
parts. Only a qualified aftersales technician
can determine if a wear part should be
replaced. Approved engine oils and filters
General information about engine oil Engine oils and oil filters are especially tested
for their suitability in our engines and
durability
for our service intervals. Therefore,
only use approved engine oils and oil filters
required for vehicles with a maintenance
computer. Conventional petroleum-based
oils must not be used for vehicles equipped
with the ASSYST maintenance computer.
The following cases are not covered by the
limited warranty for new vehicles:
R using engine oils and oil filters of
specification other than those expressly
required by the maintenance computer.
R changing the engine oil and oil filter at
longer change intervals than those
specified by the maintenance computer.
R using any oil additives.
We recommend MOBIL OIL. MB sheet numbers Use the following table to determine the MB
sheet numbers. Refer to the Operator's
Manual to determine the engine type of your
vehicle. The model and engine type can be
found in the "Service products and
capacities" section of the "Technical data"
chapter under "Engine oil".
Engine type MB sheet number
642 228.51, 229.51
i
MB sheet numbers are printed on the
outside of the oil container.
Viscosity grades for engine oils In this table, select the oil viscosity according to
the lowest anticipated air temperature before the
next oil change.
Regular checks
In addition to the maintenance service, you
should also perform regular checks on the
following (e.g. weekly, when refueling or
before any long journey):
R Oil level – Depending on the vehicle
equipment,
check the oil level of the engine
using either the oil dipstick or using the
control system via the multifunction
steering wheel/multifunction display.
Refer to the Operator's Manual for further 6
Introduction
Maintenance Booklet
