Opening and closing
Remote control with an integrated
folding key
The vehicle comes equipped with 2 or 4
remote controls with an integrated folding
key.
The key's remote control conforms to the
FCC regulations (part 15) and the Canadian
Industrial Standard RSS-210 and has a range
of up to 32 ft (10 m).
Remote control with an integrated folding key
00460042 To unlock the sliding doors and the
rear door00470036 To unlock the driver's door only or
the vehicle centrally008A0037 To lock the vehicle centrally0088Key release button0086Battery check lampXTo unlock the driver's door: press the
0036 button.
The turn signals flash once. The anti-theft
alarm system (ATA) is deactivated.XTo unlock the sliding doors and rear
door: press the 0042 button.
The turn signals flash once.XTo unlock centrally: unlock the driver's
door.XPress the 0036 unlocking button again
within two seconds.
The turn signals flash once.i Cargo Vans and Passenger Vans only: if
you unlock the vehicle using the remote
control and do not open a door within
40 seconds, the vehicle is automatically
relocked.XTo lock centrally: press the 0037 locking
button.
The turn signals flash three times when the
drive authorization system or the Anti-Theft
Alarm system (ATA) is activated and all the
doors are closed.
i Make sure that the locking knobs have
dropped down.
You can find further information in the
"Controls" section of the vehicle's Operator's
Manual.
Adjusting
Ignition lock
005DTo insert/remove the key, to lock the
steering wheel004ATo unlock the steering wheel, power
supply for some consumers (e.g. the
radio)004BTo switch on the ignition, power supply for
all consumers preglow and drive position004CTo start the engine
i To unlock the steering wheel, move the
steering wheel slightly while turning the key
to position 1.
10AdjustingControlsGWarning!Make sure that you read the Operator’s Manual. You may
otherwise fail to recognize hazards.
