2012 MERCEDES-BENZ SPRINTER check engine

Instrument cluster variantsFunction0046Instrument cluster on vehicles
without steering-wheel buttons0047Indicator and warning lamps008A0069 , 006A Brightens/dims the
instrument cluster lighting0088Tachometer with indicator and
warning lamps0086Display0087Fuel gauge with fuel filler flap
location indicator006ESpeedometer with indicator and
warning lamps006FReset button 00480070007B Menu button:• changes standard display• selects menus0071Instrument cluster on vehicles
with steering-wheel buttonsFunction0072Indicator and warning lamps0073Display0074Tachometer with indicator and
warning lamps0075Fuel gauge with fuel filler flap
location indicator00760069 , 006A Brightens/dims the
instrument cluster lighting0077Speedometer with indicator and
warning lamps0078Reset button 0048007900A4 Service buttonChecks the engine oil level Indicator and warning lamps0067ESP ®
warning lampASR warning lamp0041Coolant level too low4Instrument cluster variantsAt a glanceGWarning!Make sure that you read the Operator’s Manual. You may
otherwise fail to recognize hazards.

Function00AECoolant temperature too high008ARestraint systems malfunction0065Brake fluid level too lowEBD malfunctionTrailer brake force booster
malfunction00B4Engine oil level warning00BBCheck engine indicator lampExhaust gas aftertreatment
malfunction0028Preglow system004ALeft-hand turn signal0077Tire pressure loss or the tire
pressure monitor is malfunctioning
(USA only)Tire pressure loss (Canada only)00BDFluid level too low in windshield
washer/headlamp cleaning system003EDoor open0026Brake pads/linings worn004DRight-hand turn signal0031ABS malfunction003DASR malfunctionBAS malfunction009EESP ®
malfunction00E4DEF supply low or contaminated/
thinnedExhaust gas aftertreatment
malfunction00ABDirt accumulation in air filter00B6Reserve fuelFuel filler cap openFunction00BAWater in the fuel003FBattery charging malfunction0055Bulb defective0066Parking brake applied0064Low-beam headlamps on004EWorking speed governor (ADR) on0063High-beam headlamps on0080Reserve fuelFuel filler cap open0082Fasten seat belt
i Vehicles with steering-wheel buttons:
Corresponding messages may also be
shown in display 0073.
Instrument cluster variants5At a glanceGWarning!Make sure that you read the Operator’s Manual. You may
otherwise fail to recognize hazards.

Opening and closing
Remote control with an integrated
folding key
The vehicle comes equipped with 2 or 4
remote controls with an integrated folding
key.
The key's remote control conforms to the
FCC regulations (part 15) and the Canadian
Industrial Standard RSS-210 and has a range
of up to 32 ft (10 m).
Remote control with an integrated folding key
00460042 To unlock the sliding doors and the
rear door00470036 To unlock the driver's door only or
the vehicle centrally008A0037 To lock the vehicle centrally0088Key release button0086Battery check lampXTo unlock the driver's door: press the
0036 button.
The turn signals flash once. The anti-theft
alarm system (ATA) is deactivated.XTo unlock the sliding doors and rear
door: press the 0042 button.
The turn signals flash once.XTo unlock centrally: unlock the driver's
door.XPress the 0036 unlocking button again
within two seconds.
The turn signals flash once.i Cargo Vans and Passenger Vans only: if
you unlock the vehicle using the remote
control and do not open a door within
40 seconds, the vehicle is automatically
relocked.XTo lock centrally: press the 0037 locking
button.
The turn signals flash three times when the
drive authorization system or the Anti-Theft
Alarm system (ATA) is activated and all the
doors are closed.
i Make sure that the locking knobs have
dropped down.
You can find further information in the
"Controls" section of the vehicle's Operator's
Manual.
Adjusting
Ignition lock
005DTo insert/remove the key, to lock the
steering wheel004ATo unlock the steering wheel, power
supply for some consumers (e.g. the
radio)004BTo switch on the ignition, power supply for
all consumers preglow and drive position004CTo start the engine
i To unlock the steering wheel, move the
steering wheel slightly while turning the key
to position 1.
10AdjustingControlsGWarning!Make sure that you read the Operator’s Manual. You may
otherwise fail to recognize hazards.