2012 MERCEDES-BENZ M-Class remote start

chil
drenarearou nd.Tostop theclosing
procedu re,doone ofthe follo wing:
R Press orpul lthe remote tailgate opening/
closing switchonthe driver' sdoor.
R Press thetailgate closing switch.
R Press theKEYLESS-GO locking/closing
switch.
R Pul loutsid ehandl eon the tailgate.
R When noSmartKey isinserted inthe starter
switch (vehicleswith KEYLESS-GO: Make
sure thevehicl e'son-board electronics
have status 0):Press button Fonthe
SmartKey.
You canclose thetailgate automatical lyusi ng
the SmartKey, theclosi ngbutton 4
or the
locking button5
. Clo
sing button andlocking button(examp le:
vehicl ewith theEASY-PACK tailgateand KEYLESS-
GO)
X To clo se: press closingbutton :onthe
tail gate.
or
X Press andhold theF button onthe
SmartKey untilthetailgate closes .
X To clo seand locksimu ltaneously:
Press lockingbutt on; onthe tailgat e. i
Simult
aneously closingand lockingthe
tailgat eis only possible ifall doors areshut
and theSmar tKey islocat edinthe vicin ity
of the tailgat e. i
The
tailgat ecan only beopene dand
close dwith theSmar tKey ifther eis no
Smar tKey inthe ignit ionlock .
If the tailgat etouc hesanobjec twhile
closing, theclosing procedure is
interrupted andthetailgate reopens. i
If
you leave aKEYLE SS-GO key inthe
cargo compartmen t,the tailgate willnot
lock.
The tailgate isnot closed unlessa
KEYLE SS-GO key isdetect ed. Opening/c
losingautomatically from
inside G
WARNING Maintain
sightofthe area around therear of
the vehicle whileoperating thetailgate with
the door-mount edremote tailgate switch.
Monitor theopening procedure carefullyto
make surenoone isin danger ofbeing
injured.
To interrupt theopening procedure, pressor
pull thedoor-mount edremote tailgate switch.
When theSmartK eyisnot inserted inthe
starter switch(vehicles withKEYLES S-GO:
Make surethevehicle's on-board electronic s
have status 0):Press button Fonthe
SmartK ey. G
WARNING Maintain
sightofthe area around therear of
the vehicle whileoperating thetailgate with
the door-mount edremote tailgate switch.
Monitor theclosing procedure carefullyto
make surenoone isin danger ofbeing
injured.
To interrupt theclosing procedure, pressor
pull thedoor-mount edremote tailgate switch.
4 For vehicles withtheEAS Y-PACK tailgateonly.
5 For vehicles withtheEAS Y-PACK tailgateandKEYLES S-GOonly. Cargo
compar tment
83Opening/closing Z

Program
mingtheintegrat edgarage
door opener onthe rear -view mirror Program
ming G
WARNING Only
press thetransm itterbutton onthe
integrated garagedooropener ifthere areno
persons orobject spresent withinthesweep
of the garage door.People couldotherwise be
injured bythe movement ofthe door. Int
egrated garagedooropener onthe rear-view
mirror
Garage doorremote controlA isnot part of
this integrat edgarage dooropener. i
To
achieve thebest result, insertnew
batteries ingarage doorremote control
A before programming.
X Before programming forthe first time, clear
the memory ofthe integrat edgarage door
opener (Ypage 308).
X Turn theSmartK eytoposition 2in the
ignition lock.
X Press andhold oneoftransm itter
buttons ;to? onthe integrat edgarage
door opener.
Indicator lamp:starts toflash yellow
after ashort period. i
Indicator
lamp:flashes yellow
immediately afterthetransm itterbutton
has been stored forthe first time. Ifthe
transm itterbutton hasalready been
programmed, indicatorlamp:does not
flash yellow until10seconds haveelapsed. X
Relea sethe transm itterbutton.
X Point transm itterbutton Bofgarage door
remote controlA towards thetransm itter
buttons onthe rear-view mirrorata
distance of2to 8inches (5to 20 cm). i
The
distance requiredbetween garage
door remote controlA and theintegrated
garage dooropener depends onthe system
of the garage doordrive. Youmight require
several attempt s.You should testevery
position foratleast 25seconds before
trying another position.
X Press andhold transm itterbutton Bon
garage doorremote controlA until
indicator lamp:lights upgreen.
Programming iscomplete ifindicator
lamp :lights uporflashes green.
X Relea setransm itterbutton ;,=or? on
the integrat edgarage dooropener andthe
transm itterbutton ongarage doorremote
cont rolB.
If indicator lamp:lights upred:
X Repea tthe programming procedureforthe
transmit terbutton. Whendoingso,vary the
distance between thegarage doorremote
cont roland therear-view mirror. i
If
the indicator lampflashes greenafter
successful programming, thegarage door
system isoperating onarolling code. After
programming, youmust synchron izethe
garage dooropener integratedinthe rear-
view mirror withthereceiver ofthe garage
door system.
Synchronizing therolling code
Your vehicle mustbewithin rangeofthe
garage orgate opener drive.Makesurethat
neither yourvehicle norany persons/ objects
are present withinthesweep ofthe door or
gate.
Observe thesafety noteswhen performin g
the rolling codesynchron ization. 306
Featur
esStowing and features

X
Turn theSmart Keytoposition 2in the
ignition lock.
X Press theprogramming buttonofthe door
or gate drive (seethedoor orgate drive
operating instructions ,e.g. under
"Programming ofadditional remote
cont rols"). i
You
now normally have30seconds to
initiate thenext step.
X Press thepreviously programmed
tran smitt erbutton ofthe HomeLin k®
integr atedgarage dooropener repeatedly
in succession untilthedoor opens.
The rolling codesynchron izationisthen
complete.
Notes onprogr ammingthe remot e
control
Canadian radiofrequency lawsrequire a
"break" (orinter ruption) ofthe tran smission
signals afterbroadcasting forafew seconds .
These signals maynottheref orelast long
enough forthe integr atedgarage dooropener
to recogn izethe signal during programming.
Comparable withCanadian law,some U.S.
garage dooropeners alsohave abuilt-in
"interr uption".
If you liveinCanada orhave difficulties
programming thegarage dooropener
(regardless ofwhere youlive) when usingthe
programming steps(seeabove), proceed as
follows:
X Press andhold oneoftran smitt er
button s; to? ofthe integr atedgarage
door opener.
Indicat orlamp :start sto flash yellow
after ashort period.
X Release thetran smitt erbutton .
X Press transmitt erbutton Bofthe garage
door remote controland hold fortwo
seconds, thenrelease fortwo seconds,
then press againandhold fortwo seconds. X
Repeat thissequence ontran smitt er
button Bofthe garage doorremot e
cont roluntil indicator lamp:isgreen.
Repeat theprocess ifindicator lamp:
turns red.
X Contin uewith theother programming
steps (seeabove).
Problems whenprogramming
If you areexperienc ingproblems
programming theintegr atedgarage door
opener onthe rear-view mirror,takenoteof
the following instructions :
R check thetran smission frequency of
garage doorremot econt rolA (usual ly
found onthe reverse sideofthe remot e
cont rol).
The integr atedgarage dooropener is
compatible withdevices thatcanbe
operated withunits inafrequency rangeof
280 to390 MHz.
R change thebatteries ingarage doorremot e
cont rolA.T hisincreases theprobabil ity
that garage doorremote controlA will
send astron gand precise signaltothe
integrated garagedooropener onthe rear-
view mirror.
R when programming, holdgarage door
remote controlA atdifferent distances
and angles fromthetransmit terbutton that
you areprogramming. Trydifferent angles
at adistance between 2and 12inches (5
to 30 cm) orthe same angle atvarying
distances.
R ifanother remotecontrolfor the same
garage doordrive isavaila ble,repeat the
same programming stepswiththisremote
cont rol.Before youperform thesteps ofthe
operation, makesurethatthere arenew
batteries inthe garage doorremote
cont rol.
R note thatsome remote controlsonly
transmit foralimited amount oftime (the
indicator lamponthe remote controlgoes Features
307Stowing and features Z