2012 MERCEDES-BENZ M-Class light

!
Ifthe coolant temperature istoo high a
displa ymessage isshown.
If the coolant temperature risesabove
248 ‡(120 †),donot drive anyfurther as
this could damage theengine. Tachometer
The redband inthe tachometer indicatesthe
engine's overrevving range.
! Donot drive inthe overrevving range,as
this could damage theengine.
The fuel suppl yis interrupted toprotect the
engine whenthered band isreached. Outside
tempera turedisplay
The outside temperature displayis in the
multifunction display(Y page 224). G
WARNING The
outside temperature indicatorisnot
designed toserve asan ice-warning device
and istherefore unsuitablefor that purpose.
Indicated temperatures justabove the
freezing pointdonot guara nteethattheroad
surface isfree ofice. The road maystillbeicy,
especial lyin wooded areasoron bridges.
Changes inthe outside temperature are
displa yedafter ashort delay. Speedometer
withsegments
The segments inthe speedometer indicate
which speed rangeisavail able.
Cruise control(Ypage 167)activated:
The segments lightupfrom thestored speed
to the maximum speed.
DISTRONIC PLUS(Ypage 169)activated:
One ortwo segments inthe setspeed range
light up.
DISTRONIC PLUSdetects avehicle infront :The
segments betweenthespeed ofthe
vehicle infront andthestored speedlightup. Operating
theon-board computer
Overview The
on-board computer isactivated assoon
as you turn theSmartKey toposition 1in the
ignition lock.
You cancont rolthe multifunction displayand
the settings inthe on-board computer using
the buttons onthe multifunction steering
wheel. :
Multifunction display
; Toswitch onthe Voice Control System;
see theseparate operating instructions
= Right controlpanel
? Left controlpanel
A Back button Dis
plays andoperation
223On-board computer and displays Z

Acti
vating/d eactivating Lan eKeepi ng
Assis t You
canusethe Lan
e Kee
p. Ass
t. fun
ction
to act ivat e/deac tivat eLan eKee pingAs sis t
(Y page 200)or Active Lan eKee pingAs sis t
(Y page 205).
X Pre ssthe= or; buttonon the
st eer ing whee lto sele ctthe Dri
veAssist men
u.
X Pre ssthe9 or: buttont oselect Lane
Keep. Asst. .
X Press a.
The current selection isdisplay ed.
X Press thea button toconf irm.
X Press the: or9 button toset Off ,
Standard or Adaptive .
X Press thea button tosave thesetting.
If Lane Keeping AssistorAct iveLane keeping
Assist isactivated, themultifunct iondisplay
shows theà symbol whentheignition is
switched on. Service
menu In
the Serv. menu
youcan:
R call updisplay messages (Ypage 238)
R restart thetire pressure losswarning
system (Canada only)(Ypage 357)
R check thetire pressure electronically
(Y page 359)
R call upthe service duedate (Ypage 317) Settings
menu
Introdu ction The Sett. menu
canbeused for:
R changing theinstr ument cluster settings
R changing thelight settings
R changing thevehicle settings
R changing theconv enienc esett ings
R restor ingthe factor ysett ings
Instrum entcluster Selecting
theunit ofmeasur ementfor
distance
The Display
UnitSpeed-/Odome ter: funct
ionallows youtochoose whether
cert aindisplay sappear inkilometers ormiles.
The selected unitofmeasurement for
distance appliesto:
R the digital speedometer inthe Trip menu
R the odometer andthetrip odometer
R the trip computer
R the current consumpt ionand therange
R the navigation instruction inthe Navi menu
R DIS TRONIC PLUS
R ASS YST PLUS service intervaldisplay
X Press the= or; button onthe
steerin gwheel toselect the Settings
menu.
X Press the: or9 button toselect the Instr.
cluster submenu.
X Press thea button toconf irm. Menus
andsubmenus
233On-board computer and displays Z

X
Press the: or9 button toselect the Display
UnitSpeed-/Od ometer funct
ion.
You willsee theselected setting: km or
miles .
X Press thea button tosave thesetting.
Selecting theperm anent display function
The Permanent
Display: funct
ionallows
you tochoose whether themultifunc tion
display alwaysshows theoutside
temperat ureorthe speed inkm/ h(USA) or
mph (Canada).
X Press the= or; button onthe
steerin gwheel toselect the Settings
menu.
X Press the: or9 button toselect the Instr.
cluster submenu.
X Press thea button toconf irm.
X Press the: or9 button toselect the Permanent
display funct
ion.
You willsee theselected setting Outside
Temperatu
re or Speedomet
er[km/h]: .
X Press thea button tosave thesetting.
Lights Switching
thedayt imerunning lampson/
off
This funct ionisnot availabl ein Canada.
If you have activat edthe Daytime Running
Lights: funct
ionand thelight switch isin the
c orà position, thedaytime running
lamps areswitched onautomatically during
the day when theengine isrunnin g.
In the dark, thefollowing alsolight up:
R the low-beam headlamps
R the parking lamps
R the taillamps
R the license platelamp
R the side marker lamps X
Press the= or; button onthe
steerin gwheel toselect the Sett. menu.
X Press the: or9 button toselect the Lights submenu.
X Press thea button toconf irm.
X Press the: or9 button toselect the Daytime
RunningLights: funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesetting.
Switching AdaptiveHighbeam Assiston/
off
X Press the= or; button onthe
steerin gwheel toselect the Sett. menu.
X Press the: or9 button toselect the Lights submenu.
X Press thea button toconf irm.
X Press :or9 toselect the Adaptive
HighbeamAssist: funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesetting.
Setting thebright nessofthe ambient
lighting
X Press the= or; button onthe
steerin gwheel toselect the Settings
menu.
X Press the: or9 button toselect the Lights submenu.
X Press the: or9 button toselect Ambient
light .
You willsee theselected setting.
X Press thea button toconf irm.
X Press the: or9 button toadjust the
brightn esstoany level from Off to Level
5 (bright).
X Press thea or% button tosave the
sett ing. 234
Menus
andsubmenusOn-board computer and displays

Setting
theambient lightingcolor
X Press the= or; button onthe
steering wheeltoselect the Settings
menu.
X Press the: or9 button toselect the Light submenu.
X Press thea button toconf irm.
X Press the: or9 button toselect the Ambient
lightcolor funct
ion.
X Press thea button toconf irm.
X Press the: or9 button toset the
color to SOLAR , NEUTRAL or POLAR .
X Press thea or% button tosave the
settin g.
Activating/deactivating surround
lighting andexterior lightingdelayed
switch-off
If you have activated the Lighting: funct
ion
and thelight switch isin the c orÃ
position, thefollowing functionsareactive
when itis dark:
R Surr ound lighting: theexterior lighting
remains litfor 40seconds afterunlocking
with thekey. Ifyou start theengine, the
surround lightingisswitched offand the
automatic headlampmode isactivated
(Y page 110).
R Exterior lightingdelayed switch-off: the
exterior lightingremains litfor 60seconds
after theengine hasbeen switched off.If
you close allthe doors, theexterior lighting
goes offafter 15seconds.
If you activate the Lighting: funct
ion,the
following lightupdepending onthe vehicle's
equipment:
R the parking lamps
R the daytime runninglamps
R the side marker lamps
R the surround lightinginthe exterior mirrors
X Press the= or; button onthe
steering wheeltoselect the Sett. menu.
X Press the: or9 button toselect the Lights submenu. X
Press thea button toconf irm.
X Press the: or9 button toselect the Locator
Lighting: funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesettin g.
Deactivat ingdelay edswitch-of fofthe
exterior lightingtemporarily:
X Before leaving thevehicle, turnthe
SmartK eytoposition 0in the ignition lock.
X Turn theSmartK eytoposition 2in the
ignition lockandback toposition 0.
The exterior lightingdelayedswitch-off is
deactivated.
Delayed switch-off ofthe exterior lightingis
reactivated thenext time youstart the
engine.
Activating/deactivating theinterior
lighting delayed switch-off
If you activate the Interior
Lighting Delay funct
ion,theinterior lighting remains
on for 20seconds afteryouremove the
SmartK eyfrom theignition lock.
X Press the= or; button onthe
steering wheeltoselect the Settings
menu.
X Press the: or9 button toselect the Lights submenu.
X Press thea button toconfirm .
X Press the: or9 button toselect the Interior
LightingDelay: funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesettin g.
Vehicle Activating/deactivating
theautom atic
door locking feature
If you select the Automatic
DoorLock: funct
ion,thevehicle iscent rally locked above
a speed ofaround 9mph(15 km/ h). Menus
andsubm enus
235On-board computer and displays Z

wheel
whentheeasy-e ntry/e xitfeat ure is
act ivat ed.
To stop steerin gwheel movemen t,mov e
st eerin gwheel adjustment lever orpres sone
of themem oryposit ionbutt ons.
Do not leave childrenunat tended inthe
vehic le,orwith access toan unloc kedvehic le.
Childre ncould open thedriver's doorand
uninten tionally activate theeasy-entry/ex it
feature, whichcouldresult inan accident
and/or serious personal injury.
X Press the= or; button onthe
steering wheeltoselect the Sett. menu.
X Press the: or9 button toselect the Convenience submenu.
X Press thea button toconf irm.
X Press the: or9 button toselect the Easy
Entry/Exit funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesetting.
Switching thebelt adjustm enton/off
For further informat iononbelt adjustmen t
(Y page 52).
X Press the= or; button onthe
steering wheeltoselect the Settings
menu.
X Press the: or9 button toselect the Convenience submenu.
X Press thea button toconf irm.
X Press the: or9 button toselect the Belt
Adjustment funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesetting.
Switching theFold inmirr orswhen
locking function on/off
If you switch onthe Fold Mirrors in when
Locking funct
ion,theexter iormirrors foldin
when youlock thevehicle. Ifyou unlock the
vehicle andthen open thedriver's orfront - passenger
door,theexter iormirrors foldout
again.
If you have switched thefunct iononand you
fold theexter iormirrors inusing thebutton
on the door (Ypage 103), theywillnotfold
out automatically. Theexter iormirrors can
then onlybefolded outusing thebutton on
the door.
X Press the= or; button onthe
steering wheeltoselect the Sett. menu.
X Press the: or9 button toselect the Convenience submenu.
X Press thea button toconf irm.
X Press the: or9 toselect the Fold
Mirrors
inwhen Locking: funct
ion.
You willsee theselected setting: Enabled
or Disabled .
X Press thea button tosave thesetting.
Resetting tofactory settings For
safety reasons, the Daytime
Running Lights: funct
ioninthe Lights submenu
is
only reset when thevehicle isstation ary.
X Press the= or; button onthe
steering wheeltoselect the Settings
menu.
X Press the: or9 button toselect the Factory
Setting submenu.
X Press thea button toconf irm.
The Reset
AllSettings? message
appears.
X Press the: or9 button toselect No or Yes .
X Press thea button toconf irmthe
selection.
If you select Yes ,
the multifunct iondisplay
shows aconf irmation message. Menus
andsubmenus
237On-board computer and displays Z

Safety
systems Display
messages Possible
causes/co nsequences andM Solutions
!÷
Currently
Unavailable
See Operator's
Manual G
Risk
ofaccident ABS
(Anti-lock Braking System), ESP®
(Electr onicStability
Program), BAS(Brake Assist), PRE-SAFE®
,the HOLD function,hill
start assist andESP®
trailer stabilization aretemporarily
unvailabl e.
BAS PLUS andPRE-SA FE®
Brake mayalsohave failed.
In addition, the÷, åand! warning lampslightupin
the instrumen tcluster.
The self-diagnosis functionmight notbecomplete, forexample.
ATTENTI ONASS ISTisdeactivated.
The brake system continues tofunct ionnormally, butwithout the
funct ionslisted above. Thewheels couldtherefore lockifyou
brake hard,forexample.
X Carefull ydrive asuitable distance makingslightsteering
movement sat aspeed above12mph (20km/ h).
If the display message disappears,the funct ionsment ioned
above areavaila bleagain.
If the display message continues tobe display ed:
X Drive oncarefully.
X Visit aqual ified specialist workshop. G
Risk
ofaccident ABS
,ESP ®
,BAS ,PRE-SA FE®
,the HOLD function,hillstart assist
and ESP®
trailer stabilization aretemporarily unavailable.
BAS PLUS andPRE-SA FE®
Brake mayalsohave failed.
In addition, the÷, åand! warning lampslightupin
the instrumen tcluster.
For example, theon-board voltagemaybeinsufficient .
ATTEN TIONASSISTisdeactivated.
The brake system continues tofunct ionnormally, butwithout the
funct ionslisted above. Thewheels couldtherefore lockifyou
brake hard,forexample.
X Drive oncarefully.
If the display message disappears,the funct ionsment ioned
above areavaila bleagain.
If the display message continues tobe display ed:
X Drive oncarefully.
X Visit aqual ified specialist workshop. Display
messages
239On-board computer and displays Z

Disp
laymessa ges Poss
iblecauses/c onseq uences and M Solu
tions !÷
Ino
perativeSee Ope
rator'sMan ual G
Ri
sk ofacci dent AB
S,ES P®
,BA S,PRE -SAF E®
,th eHO LD function ,hill start assi st
and ESP®
trailer stabiliz ation are unav ailable duetoamalf unction .
BA SPLU Sand PRE-SAF E®
Br ake may alsohavefail ed.
The $ (USAon ly)/ J (Canadaonly), ÷, å
and ! warning lamp sin theinst rum entc luster alsolight up.
The brak esyst emcontinues tofun ction normally, butwitho utthe
func tionslist ed above. Thewheels couldtherefore lock ifyou
brak ehard, forexam ple.
ATT ENTION ASSIS Tis deact ivated.
X Dr ive oncare fully.
X Visit aqualified specialist workshop immed iately. ÷
Curr
ently Unav
ailableSee Oper
ator'sManu al G
Risk
ofacciden t ES
P®
,BA S,PRE- SAFE®
,the HOL Dfunc tion,hill start assist and
ES P®
trailer stabilizat ionare tem porar ilyunavailable.
BA SPLUS andPRE- SAFE®
Br ake may alsohave failed.
In additio n,the ÷ andå warnin glamps lightupinthe
inst rumen tclust er.
The self- diagno sisfunc tion might notbecom plete ,for exam ple.
ATT ENTION ASSIS Tis deact ivated.
The brak esyst emcontinues tofun ction normally, butwitho utthe
func tionslist ed above.
X Carefully driveasuitable distancemak ingslight steerin g
mov emen tsat aspeed above12mph (20km/h).
If the display messagedisappears ,the func tionsmen tioned
above areavailable again.
If the display messagecontinues tobe displayed:
X Dr ive oncare fully.
X Visit aqualified specialist workshop. 240
Display
messagesOn-board computer and displays

Disp
laymessa ges Poss
iblecauses/c onseq uences and M Solu
tions ÷
Ino
perative See Ope
rator'sMan ual G
Ri
sk ofacci dent ES
P®
,BA S,PRE -SAF E®
,th eHO LD function ,hill start assi stand
ES P®
trailer stabiliz ation are unav ailable duetoamalf unction .
BA SPLU Sand PRE-SAF E®
Br ake may alsohavefail ed.
In addit ion,th e÷ andå warning lamp sligh tupin the
inst rument cluster.
ATTE NTION ASSIS Tis deactiv ated.
The brake system continues tofunc tion norm ally,butwithout the
func tionslisted above.
X Driv eon carefully.
X Visit aqualified specialist workshop. T!
÷
Inoper
ative See Operat
or'sManual G
Risk
ofaccident EB
D(elect ronic brake forcedistr ibution), ABS,ES P®
,BA S,PRE-
SA FE®
,the HOLD function,hill start assist andESP®
trailer
stabilizat ionare unavailable duetoamalfunc tion.
BA SPLUS andPRE-S AFE®
Brak emay alsohave failed.
In addition, the÷, åand! warning lampslightupin
the instrument clusterandawarning tonesounds.
ATTE NTION ASSIS Tis deactiv ated.
The brake system continues tofunc tion norm ally,butwithout the
func tionslisted above. Thewheels couldtherefore lockifyou
brake hard,forexample.
X Driv eon carefully.
X Visit aqualified specialist workshopimmediately. #
Check
Brake Pad Wear The
brake pads/linin gshave reached theirwear limit.
X Visit aqualified specialist workshop. F(USA
only)!
(Canada
only) Please
Release Parkin
gBrake The
redF (USAonly)/ !(Canada only)indicat orlamp
flashes andawarning tonesounds. Acondition forautomatic
release ofthe electric parking brakeisnot fulfilled (Ypage 156).
You aredriving withtheelectric parking brakeapplied .
X Release theelectric parking brakemanually . The
redF (USAonly)/ !(Canada only)indicator lamp
flashes andawarning tonesounds.
You aremaking anemergenc ystop using theelectric parking
brake (Ypage 156). Display
messages
241On-board computer and displays Z