2012 MERCEDES-BENZ GL SUV oil

X
Select Open camera cover and press
W
to confirm.
Th ec over of the 360° cam erao pens.
X To clean the 360° cam era: clean camera
lens :with clean water and asoft cloth.
i If you ar etravelling faster th an30 km/h
or if the key is in po sition 0or 1in the igni-
tion lock, the cove rofthe 360° cam era
close sautomatically.
Cleaning th eexhaust pipe !
Do not clean the exh aust pipe with acidic
cleaning agents, such as sanitar yorwheel
clea ners.
Impurities combined wit hthe effect sofroad
grit and corrosiv eenvironmental factors may
cause flash rust to for monthe surface. You
can restore the original shine of the exhaust
pip ebyc leaning it regularly ,especiall yinw in-
ter and after washing.
X Clean the exhaust pipe with achrome care
produc ttested and approved by Mercedes-
Benz.
Cleaning the trailer tow hitch H
Environmental note
Dispose of oily and greasy clot hs in an envi-
ronmentally-re sponsible manner.
! Do not clea nthe ball couplin gwithahigh-
pressure cleaner. Do not use solvents.
! Observe the not eoncare provided by the
trailer manufac turer. Th
eb all coupling must be cleaned if it
becomes dirty or corroded.
X Remove rust on the ball of the ball coupling,
e.g. with awire brush.
X Remove dirt with aclean, lint-free clot hor
ab rush.
X After cleaning, lightly oi lorg rease ball cou-
pling :.
X Check that th evehicle' strailer to whitchis
workin gproperly.
i Youc an also have the maintenanc ework
on the ball coupling and the trailer tow hitch
carried out by aqualified specialist work-
shop. Interior care
Cleaning the display !
For cleaning, do not use any of the fol-
lowing:
R alcohol-based thinner or petrol
R abrasive cleaning agents
R commercially-available househol dclean-
ing agents
These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to irrepara-
ble damage to the display.
X Befor ecleanin gthe display, make sur ethat
it is switc hed offand has cooled down.
X Clean the display surface using acommer-
cially available microfibre clot hand TFT/
LCD display cleaner.
X Dry the display surface using adry micro-
fibre cloth.
Cleanin gNight View Assist Plus !
Never clean the camera lens. When clean-
ing the field of vision of the driving systems,
mak esure that you do not spray glass
cleaner on the camera lens. If the camera Care
371Maintenance and care Z

lens is dirty, visit
aqualified specialist work-
shop. X
Fold down the camera cover by recess :.X
Use asoft clot htoclean the windscreen in
fron tofc amera ;.
Cleaning th eplastic trim G
WAR
NING
Whe ncleaning the steerin gwheel boss and
dashboard, do not use cockpit sprays or
clea ning agents containing solvents. Cleani ng
agent scontaining solvent scause the surface
to become porous, and as aresult plastic
part smay break away and be thrown around
the interior when an airbag is deployed, which
may result in severe injuries.
! Do not affix the following to plastic surfa-
ces:
R stickers
R films
R scented oil bottles or similar items
You could otherwise damage the plastic. !
Do not allow cosmetics, insect repellent
or sunscreen to come in contact with the
plastic trim .This maintain sthe high-quality
look of the surfaces.
X Wipe the plastic trim with adamp, lint-free
cloth, e.g. amicrofibre cloth.
X Heavy soiling: use car care and cleaning
products recommended and approved by
Mercedes-Benz.
The surface may change colour tempora-
rily. Wait until the surface is dry again.
Cleanin gthe steering whee land gear or
selector lever X
Thoroughl ywipe with adamp cloth or use
leather care agents that have been recom-
mended and approved by Mercedes-Benz.
Cleanin gwooden trim and trim ele-
ments !
Do not use solvent-based cleaning agents
such as tar remover, wheel cleaners, pol-
ishes or waxes. There is otherwise arisk of
damaging the surface.
X Wipe the wooden trim and trim elements
with adamp, lint-free cloth, e.g. amicrofi-
bre cloth.
X Heavy soiling: use car care and cleaning
products recommended and approved by
Mercedes-Benz.
Cleanin gthe seat covers !
Observe th efollowin gwhen cleaning:
R clea ngenuin eleather covers carefully
with adamp cloth and then wipe the cov-
ers down with adry cloth .Make sure that
the leather does not become soaked .It
may otherwise become rough and
cracked .Only use leather care agents
that have bee ntested and approved by 372
CareMaintenance and care

Storing wheels
Stor ewheels that ar enot being used in acool,
dry and preferably dar kplace. Protect the
tyres against oil, grease, petrol and diesel. Cleaning the wheels
G
WARNING
The water jet of circular-jet nozzles (dirt grind-
ers) can cause damage not visible from the
outside to tyres or chassis components. Com-
ponent sdamaged in this way can unexpect-
edly fail. There is arisk of an accident.
Do not use high-pressure cleaners with circu-
lar-jet nozzles to clean the vehicle. Have dam-
aged tyres or chassis components replaced
immediately. Fitting
awheel
Preparing the vehicle X
Vehi cles with an emergency spare
wheel: whenfitting the emergenc yspare
wheel in the even tofaflat tyre, observe the
addi tional note sonvehicl epreparation
under "Flat tyre" (Y page 378).
X Pa rk th evehicle on firm, non-slippery and
level ground.
X Unload heavy luggage.
X Engage the electric parking brak eman-
ually.
X Bring the front wheels into the straight-
ahead position.
X Shift the transmission to position P.
X Switch off the engine.
X Vehicles without KEYLESS-GO: remove
the key from the ignition lock.
X Vehicles with KEYLESS-GO: open the
driver' sdoor.
The on-boar delectronic shave status 0,
which is the same as the key having been
removed. X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock
(Y page 159).
X If included in the vehicle equipment, take
the tyre-change tool kit out of the vehicle.
X Secure the vehicle to prevent it from rolling
away.
i Apart from some country-specific var-
iants, vehicles are not equipped with tyre-
changing tools .For mor einformation on
which tool sare require dtop erform awheel
change on your vehicle, consult a
Mercedes-Ben zService Centre.
Required tyre-cha nging tools could be, for
example:
R jack
R wheel chock
R wheel wrench
Securing the vehicle against rolling
away If your vehicle is equipped with
awheel choc k,
it can be found in the tyre-change tool kit
(Y page 377).
The folding wheel chock is an additional
securing measure to prevent the vehicle from
rolling away, for example when changing a
wheel.
X Fold both plates upwards :.
X Fold out lower plate ;.
X Guide the lugs on the lower plate fully into
the openings in base plate =. Changing
awheel
405Wheels and tyres Z

X
Unscre wthe uppermost wheel bolt com-
pletely.
X Screw cen tringpin:into the thread
instead of the wheel bolt.
X Unscrew the remainin gwheel bolts fully.
X Remove the wheel.
Fitting anew wheel G
WARNING
Oiled or greased wheel bolt sordamaged
wheel bolts/hub threads can cause the wheel
bolts to com eloose .Asa result,you could
lose awheel while driving. There is arisk of
accident.
Never oil or grease wheel bolts. In the event
of damage to the threads, contact aqualified
specialist workshop immediately .Have the
damaged wheel bolts or hub threads
replaced/renewed. Do not continue driving. G
WARNING
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jac kcould tip
over .There is arisk of injury.
Only tighten the wheel bolts or wheel nuts
when the vehicle is on the ground.
Always pay attention to the instructions and
safety notices in "Changing awheel"
(Y page 404).
Only use wheel bolts that hav ebeen designed
for the wheel and the vehicle. For safet yrea-
sons, Mercedes-Benz recommends that you
only use wheel bolts which have been approved for Mercedes-Benz vehicles and the
respec
tivewheel.
! Always use wheel bolts ;to fit the col-
lapsibl eemergency spare wheel. Using
othe rwheel bolts to fit the collapsible
emergenc yspare wheel could damage the
brak esystem. :
Wheel bolts for all wheels supplied by the
factory
; Wheel bolts for the "Minispare" emer-
gency spare wheel X
Clean the whee land wheel hub contact
surfaces.
X Slide the wheel to be mounted onto the
centring pin and pus hito n.
X Tighten the wheel bolts until they are fin-
ger-tight.
X Unscrew the centring pin.
X Tighten the last wheel bol tuntil it is finger-
tight. 408
Changin
gawheelWheels and tyres

data applicable to your vehicle on the vehi-
cle' sidentification plate. VIN
X
Open the fron tright-han ddoor.
X Open cover :in the dire ction of the arrow
and remove it.
The VI Ncan be seen.
The VIN can also be foun donthe vehi cle
identification plate (Y page 422).Engine number
The engin enumber is stamped ont othe
crankcase .You can obtain further informa-
tion fr om any qualified specialist workshop. Service products and capacities
Important safety notes
G
WARNING
Whe nhandling ,storing and disposing of any
servic eproducts, please observe the relevant
regulations, as you could othe rwise endanger
yourself and others.
Keep servic eproducts awa yfromc hildren.
To protec tyour health, do no tallow service
products to com eintoc ontac twith your eyes
or open wounds. See adoctor immediately if
any servic eproduct is swallowed. H
Environmental note
Dispose of service products in an environ-
mentally-responsible manner.
Service products includ ethe following:
R fuels (e.g. petrol, diesel)
R exhaust gas after treatmen tadditives, e.g.
AdBlue ®
R lubrican ts(e.g. engin eoil, transmission oil)
R coolant
R brake fluid
R windscreen washer fluid
R clima te control systemrefrigerant
Components and servic eproducts mus tbe
matched. Mercedes-Benz reco mmends that
you use produc tstested and approved by
Mercedes-Benz. They are listed in this
Mercedes-Benz Owne r'sM anual in the appro-
priat esection.
You can identif yservice product sapproved
by Mercedes-Ben zbythe fol lowinginscrip-
tion sonthe container:
R MB Freigab e(e.g. MB Freigab e229.51)
R MB Approva l(e.g. MB Approval 229.51)
Other designation sorrecommendation sind i-
cat eal evel of qualit yora specification in
ac cord ance wit hanMBS heet Nu mber (e.g.
MB 229.5). They hav enot necessarily been
approved by Mercedes-Benz.
Further informatio ncan be obtained from any
Mercedes -Ben zS ervice Cent reor on the
In te rnet at ht tp://bevo.mercedes -benz.co m. Fuel
Important safety notes G
WARNING
Fuel is highly flammable. If you handle fuel
incorrectly, there is arisk of fir eand explo-
sio n.
You must avoi dfire, naked flames, creating
sparks and smoking. Switc hoff the engine Servic
eproducts and capacities
423Technical data
Z

Diesel (EN 590)
Fuel grade
G
WARNING
If you mix diesel fue lwithp etrol, th eflash
poin toft his fuel mixtur eislower than that of
pur ediesel fuel. When the engine is running,
components in the exhaust system may over-
heat unnoticed. There is arisk of fire.
Never refuel with petrol. Never add petrol to
diesel fuel.
! When refuelling, only use diesel fuel that
conforms to the European standard EN 590
or is of equivalen tquality .Fuel that does
not con form to EN 59 0can lead to
increased wear as well as damag etothe
engin eand exhaust sys tem.
! Do not use the following:
R marine diesel
R heating oil
R bio-diesel
R vegetable oil
R petrol
R paraffin
R kerosene
Do not mix such fuels with diesel fuel and
do not use any special additives. This can
otherwis elead to engine damage .This
does not include flo wimprover additives.
For further information, se e"Flow improv-
ers".
! Vehicles with adiesel particle filter: in
countries outside the EU, only refuel with
low-sulphur Eur odiesel with asulphur con-
ten tunde r50p pm; otherwise the emission
contro lsystem could be damaged.
! Vehicles without adiesel particle fil-
ter: in countries where only diesel fuel with
ah igh sulphur conten tisavailable ,you will
need to carry out your vehicle' soil change
at shorter intervals. More information
abou tthe interval for oil change can be obtained from any qualified specialist
workshop.
Usually you will fin dinformation about the
fuel grade on the pump. If you cannot find the
labe lont he petrol pump, ask the filling sta-
tion staff.
Infor mation on refuelling (Y page 175).
Low outside temperatures
In winter months, diesel fuel with an improved
cold flow quality is available. In Europe, the
EN 590 standard defines various climate-
dependent temperature categories. Malfunc-
tions can be avoide dbyrefuelling with diesel
fuel that corresponds to the climatic specifi-
cations outlined in EN 590. At unusually low
outside temperatures, it is possible that the
flow characteristics of the diesel fuel could be
insufficient .Accordingly, dies elfue lfrom
warmer areas may not be suitabl efor opera-
tion in colder climat icconditions.
i Further informatio noncountry-specific
fuel properties can be obtained from oil
companies, e.g. at filling stations.
Flow imp rovers
To improve the low-temperatur eresistanc eof
diesel fuel, aflow improver can be attached.
The effec tiveness of aflow improver is not
guaranteed for every fuel.
Only use flow improvers tested and approved
by Mercedes-Benz. Durin guse, please
observe the information on operation.
Correc tdosage and sufficien tmixing are deci-
sive in improving low-temperature resistance
with the flow improver. Overdosage can
potentially even decrease low-temperature
resistanc eand must therefor ebeavoided.
Follo wthe manufacturer's guidelines on dos-
age.
Mix the additive int othe diesel in good time,
before the flo wcharacteristic softhe diesel
becom einsufficie nt.O therwise, malfunctions
can only be rectified by heating the entire fuel
system, e.g. by parking in aheated garage. 426
Service products and capacitiesTechnical data

R
engin edamage
R malfunc tions in the BlueTEC ®
exhaust
gas aftertreatmen tsystem
Assuring the purity of AdBlue ®
is particularly
importan twithr espec ttoavoiding malfunc-
tions in th eBlueTEC exhaust gas aftertreat-
ment system.
If AdBlue ®
is pumped out of the AdBlue ®
tank,
e.g. during repair work, do not use this fluid
to refill the tank. The purity of the fluid can no
longer be guaranteed.
Capacities Model Tota
lcapacity GL 35
0Blue-
TEC 4MATIC 31.2 l
Engine oil
General notes The quality of the engine oil is decisive for the
function and servic
elife of an engine. After
extensive tests, Mercedes-Benz approves
engine oil sthat correspond to the current
technical standard.
Therefore, only Mercedes-Benz approved
engin eoilsm ay be use dinMercedes-Benz
engines.
Further information on tested and approved
engine oils can be obtained from any
Mercedes-Ben zService Centre. Mercedes-
Benz recommends that you have the oil
change carried out at aqualified specialist
workshop. Mercedes-Benz approval is indica-
ted on the oil container by the inscription "MB
Approval" and the corresponding designa-
tion, e.g. MB Approva l229.51.
Yo uc an call up an overview of approved
engine oil sonthe Internet at:
http://bevo.mercedes-benz.com by enter-
ing the designation ,e.g. 229.5.
Th et able sho wswhich engine oil shave been
approved for you rvehicle. Petrol engines MB App
roval GL 500 4MATIC Blue-
EFFICIENCY
GL 63 AMG
22
9.5 Diesel engines with a
diesel particle filter MB Approval
GL 350 Blue-
TEC 4MATIC
GL 350 CDI 4MATIC
228.51,
229.31 ,229.51 Diese
lengines without
ad iesel particle filter MB Approval
GL 350 CDI 4MATIC
22
8.31 ,228.5,
228.51, 229.3,
229.31, 229.5, 229.51 Use onl
ySAE 0W-40 or SAE 5W-40 engine oils
for AM Gvehicles.
i If the engine oils listed in the table are not
available, you may add the followi ngengine
oils until the nex toil change:
R vehicles with apetrol engine: MB
Approval 22 9.12 29.3 or ACEA A3
R diesel engines: MB Approva l229.1,
229.3, 229.5 or ACEA C3
Use onl ySAE 0W -40o rSAE 5W -40e ngine
oil sf or AMG vehicles.
This ma yonly be topped up once, and the
quantity must not be greate rthan 1. 0l.
Ca pacities Th
ef ollowing va luesrefertoano il change
including the oil filter. 428
Service products and capacitiesTechnica
ldata

Model Replacement
amount GL 50
04MATIC
Blue EFFICIEN CY 8.5 l
GL 63 AMG
With external oil
cooler: 9.5 l GL 350 Blue-
TEC 4MATIC
GL 350 CDI
4MATIC
8.0 l
Additives
!
Do not use any additives with the engine
oil .T his could damage the engine.
Engine oil viscosity Viscosit
ydescribes the flow characteristics
of afluid. If an engine oil has ahigh viscosity
rating, it flows slowly ;the lower the viscosity,
the faster it flows.
Engin eoil selection is based on the respective
outside temperatures and in accordance with
the SAE classification (viscosity). The table
shows you which SAE classifications are to be
used. The low-temperature properties of
engine oils can be significantly impaired dur-
ing operation due to, for example, ageing or
soot and fuel accretion .Itistherefore
strongly recommended to observe regular oil
changes usin ganapproved engine oil with the
appropriate SAE classification. Brake fluid
G
WARNING
Over aperiod of time, the brak efluid absorbs
moisture from the air; This lowers its boiling
point.
If the boiling point of the brake fluid is too low,
vapour pocket smay form in the brake system
when the brakes are applied hard (e.g. when
driving downhill). This impairs braking effi-
ciency.
You shoul dhave the brake fluid renewed at
regular intervals. The brake fluid change inter-
vals can be found in the Service Booklet.
Only use brake fluid approved by Mercedes-
Benz according to MB Approval 331.0.
Information about approved brake fluid can
be obtained at any qualified specialist work-
sho poront he Internet at
http://bevo. mercedes-benz.com.
i Have th ebrake flui drenewed regularly at
aq ualified specialist workshop. Coolant
Important safety notes G
WARNING
Antifreeze is highly flammable. Fire, naked
flames and smoking are prohibited when han-
dling antifreeze.
If antifreeze comes into contact with hot
engine parts, it may ignite and you could burn
yourself. Do not spill any antifreeze on hot
engine parts.
! Only add coolant that has been premixed
with the desired antifreez eprotection. You
cou ld othe rwise damage th eengine.
Further information on cool ants can be
found in the Merced es-Benz Specifications
for Service Prod ucts, MB Specifications for
Service Products 310.1 ,e.g. on the Inter-
net at http://bevo.mercedes-benz.co m.
Or contac taqualified specialist workshop. Servic
eproducts and capacities
429Technical data Z