2012 MERCEDES-BENZ G-Class fold seats

S
Safety Children in the vehicle .....................47
Child restraint systems ....................47
Overview of occupant safety
systems ...........................................
32
Safety systems
see Driving safety systems


Seat backrest
Folding back .................................. 191
Folding forwards ............................ 191
Seat belts
Adjusting the height ......................... 45
Belt force limiters ............................ 47
Cleaning ......................................... 222
Correct usage .................................. 42
Emergency Tensioning Devices ........ 47
Fastening ................................... 43, 44
Fastening, front ............................... 44
Fastening in the rear, center ............44
Important safety guidelines .............41
Releasing ......................................... 46
Safety guidelines ............................. 33
Special seat belt retractor ............... 49
Warning lamp ................................. 178
Warning lamp (function) ................... 46
Seat heating
Indicator lamp (malfunction) ............ 81
Seats
Adjusting the 4-way lumbar
support ............................................ 79
Adjusting the head restraint ............ 77
Cleaning the cover ......................... 221
Correct driver's seat position ........... 74
Important safety notes .................... 75
Multicontour seat ............................ 79
Storing settings (memory
function) .......................................... 85
Switching seat heating on/off ......... 80
Switching seat ventilation on/off ....81
Seat ventilation
Indicator lamp (malfunction) ............ 81
Sensors (cleaning instructions) .......220
Service indicator see Service interval display Service interval display
....................215
Displaying a
service message (on-
board computer) ............................ 216
Service products
Brake fluid ..................................... 275
Capacities ...................................... 273
Coolant (engine) ............................ 276
Engine oil ....................................... 275
Fuel ................................................ 273
Important safety notes .................. 272
Notes ............................................. 272
Refrigerant (air-conditioning
system) .......................................... 275
Washer fluid ................................... 277
Settings
Calling up a stored setting ............... 86
Factory (on-board computer) ......... 158
On-board computer ....................... 158
Setting the unit (on-board
computer)
Speedometer ................................. 159
Shift ranges ....................................... 121
Side marker lamp (display
message) ............................................ 169
Side windows Convenience closing feature ............ 69
Convenience opening feature .......... 69
Important safety information ........... 68
Opening/closing .............................. 68
Troubleshooting ............................... 69
Ski rack .............................................. 193
Sliding sunroof Important safety notes .................... 70
Opening/closing .............................. 70
Operating manually ..........................71
SmartKey
Changing the battery ....................... 62
Changing the programming ............. 61
Checking the battery ....................... 62
Convenience closing feature ............ 69
Convenience opening feature .......... 69
Important safety notes .................... 60
Loss ................................................. 64
Malfunction ...................................... 64
Starting the engine ........................ 116
Snow chains ...................................... 24512
Index

Top Tether
G
WARNING
Observe "Important safety notes"
(Y page 47). G
WARNING
Always lock the rear seat backrests in their
upright position when the rear seats are
occupied by passengers. Lock the rear seat
backrests in their upright position before
installing the Top Tether straps or when the
cargo compartment is not in use. Make sure
that rear
seat backrests are secured properly
by pushing and pulling on the seat backrests.
If the seat backrest is not locked properly, the
seat backrest could fold forward. The child
restraint system is no longer supported
properly or held in position and can no longer
fulfill its function. This could cause serious or
even fatal injuries.
Top Tether provides an additional connection
between a child restraint system, secured
with a LATCH-type (ISOFIX) child seat anchor,
and the rear seat. This helps reduce the risk
of injury even further. X
Remove the cargo compartment cover
(Y page 192).
X Move the head restraint upwards.
X Install the LATCH-type (ISOFIX) child
restraint system with Top Tether. Comply
with the manufacturer's installation
instructions when doing so.
X Route Top Tether belt = under the head
restraint between the two head restraint
bars.
X Attach Top Tether hook : to Top Tether
anchorage ; on the trunk floor.
X Make sure that Top Tether belt = is not
twisted.
X Tension Top Tether belt =. Comply with
the manufacturer's installation
instructions when doing so.
X Move the head restraint back down again
slightly if necessary (
Y

page 77). Make
sure that you do not interfere with the
correct routing of Top Tether belt =. G
WARNING
Only use the described top tether anchorage
rings for the respective child seat. Other
lashing eyelets could tear in case of an
accident. Make

sure the top tether straps are
not crossed or twisted and the hook is
attached and closed properly. Children in the vehicle
51
Safety Z

Do not drive the vehicle without the seat head
restraints. Head restraints are intended to
help reduce injuries during an accident.
! To avoid

damage to the seats and the seat
heating, observe the following information:
R do not spill any liquids on the seats. If
liquid is spilled on the seats, dry them as
soon as possible.
R if the seat covers are damp or wet, do not
switch on the seat heating. The seat
heating should also not to be used to dry
the seats.
R clean the seat covers as recommended;
see the "Interior care" section.
R do not transport heavy loads on the
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
R when the seat heating is in operation, do
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
! When the rear bench seat is folded
forwards, the front seats cannot be moved
to their rearmost position. You could
otherwise damage the seats and the rear
bench seat.
! Make sure that the sun visor is folded up
before adjusting the backrest and head
restraint height. The head restraint and sun
visor could otherwise collide when the head
restraint is fully extended.
i If the front door is open, the seats can be
adjusted for up 30 minutes after the
ignition has been switched off.
i The head restraints in the front and rear
seats can be removed ( Y page 78). Please contact an authorized Mercedes-
Benz Center for more information.
i You can find further information about
enlarging the cargo compartment (folding
the rear bench seat forwards) on
(Y page 190). Adjusting the seats electrically
General notes The buttons are located on the door control
panel.
:
Head restraint height
; Backrest angle
= Seat fore-and-aft adjustment
? Seat cushion angle
A Seat height
X Turn
the SmartKey to position
1 or
2
in the
ignition lock.
Seat fore-and-aft adjustment !
Before moving the front passenger seat
forward, make sure that the cup holder on
the center

console is folded down and that
the cup holder on the armrest has been
removed. Otherwise, the front passenger
seat or the cup holders may be damaged.
X Slide the button forwards or back in the
direction of arrow =.76
Seats
Seats, steering wheel and mirrors

Backrest angle
X
Slide the button forwards or back in the
direction of arrow ;.
Seat height X
Slide the button up or down in the direction
of arrow A.
Seat cushion angle Adjust the seat cushion angle so that your
thighs are lightly supported.
X
Slide the button up or down in the direction
of arrow ?.
Head restraint height X
Slide the button up or down in the direction
of arrow :.
i For further information on head
restraints, see (Y page 77).
i You can store the seat settings using the
memory function ( Y page 85).Adjusting the head restraints
Important safety notes G
WARNING
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the
area around head restraints clear of
articles (e.g. clothing) to not obstruct the
folding operation of the head restraints. G
WARNING
For your protection, drive only with properly
positioned head restraints.
Adjust the

head restraint so that it is as close
to the head as possible and the center of the
head restraint supports the back of the head
at eye level. This will reduce the potential for injury to the head and neck in the event of an
accident or similar situation.
Do
not

drive the vehicle without the seat head
restraints. Head restraints are intended to
help reduce injuries during an accident.
Adjusting the front seat head restraint
height The button is located on the door control
panel.
X
Slide head restraint adjustment button :
up or down in the direction of the arrow.
Adjusting the front seat head restraint
angle G
WARNING
Vehicles with Rear Seat Entertainment
System: When adjusting the head restraint,
make sure

your fingers do not become caught
between the head restraint cushion and the
monitor. Failing to do so may lead to injury. Seats
77
Seats, steering wheel and mirrors Z

X
Push or pull the lower edge of the head
restraint in the direction of the arrow.
Resetting the front seat head restraints It is necessary to reset the front seat head
restraints after the voltage supply has been
interrupted, e.g. if the battery has been
completely discharged or disconnected.
X
Make sure that the cup holder on the center
console is folded down (Y
page 193).
X Move the seat as far forward as possible
and the

head restraint in as far as possible.
Rear seat head restraints Important safety notes
G
WARNING
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the

area around head restraints clear of
articles (e.g. clothing) to not obstruct the
folding operation of the head restraints. G
WARNING
For your protection, drive only with properly
positioned head restraints.
Adjust the

head restraint in such a way that it
is as close to the head as possible and the
center of the head restraint supports the back
of the head at eye level. This will reduce the
potential for injury to the head and neck in the
event of an accident or similar situation.
With a rear seat occupied, make sure to move
the respective head restraint up from the
lowest non-use position and have the
occupant adjust the head restraint properly.
Do not drive the vehicle without the seat head
restraints installed when the rear seats are
occupied. Head restraints are intended to
help reduce injuries during an accident. G
WARNING
Make sure the rear seat head restraints
engage when placing them upright manually. Otherwise their protective function cannot be
ensured.
The
back

of the head will not be supported in
the event of a collision. That could cause
serious or even fatal injuries. Rear seat
occupants can be seriously injured or killed.
Adjusting the rear seat head restraint
height X
If the head restraint is fully lowered, it is
necessary to press release catch :.
X To raise: pull the head restraint up to the
desired position.
X To lower: press release catch :
and push
the head restraint down until it is in the
desired position.
Adjusting the rear seat head restraint
angle
The angle of the rear head restraints is
adjusted in

the same way as for the front head
restraints ( Y page 77).
Installing/removing the rear seat head
restraints
X To remove: pull the head restraint up to
the stop.
X Press release catch : and pull the head
restraint out of the guides.
X To re-install: place the head restraint in
the guides of the backrest.78
Seats
Seats, steering wheel and mirrors

i
The notches
on the guide rod must be on
the left-hand side when viewed in the
direction of travel.
X Push the head restraint down until you hear
it engage in position.
Adjusting the luxury head restraints G
WARNING
When folding back the head restraint side
bolsters, do not put your hands between the
side bolster and the cushion holder. There is
a danger of becoming trapped. X
To adjust the side bolsters of the head
restraint: push or pull right and/or left-
hand side bolster : into the desired
position.
X To adjust the angle of the head
restraint: push

or pull the head restraint in
the direction of arrow ;. Adjusting the multicontour seat
You can

adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides.
X Make sure that the SmartKey is in
position 1 in the ignition lock. :
To adjust the thigh cushion
; To adjust the backrest contour in the
lumbar region
= To adjust the backrest contour in the
upper back region
? To adjust the side bolsters of the seat
backrest Adjusting the four-way lumbar
support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back. :
To raise the backrest contour
; To soften the backrest contour
= To lower the backrest contour
? To harden the backrest contour Seats
79
Seats, steering wheel and mirrors Z

For safety reasons, the rear seat bench must
only be adjusted when the vehicle is
stationary.
Never drive a vehicle with the tailgate open.
Deadly carbon monoxide (CO) gases may
enter vehicle interior resulting in
unconsciousness and death.
! Ensure that you remove all containers
from the cup holder in the rear before
folding the seat backrest and the seat
cushion of the rear bench seat forwards.
The left-hand and right-hand rear seats can
be folded down to increase the cargo
compartment capacity. The following
changes are possible:
R fold the seat backrests forward
R fold the rear bench seat back fully.
Folding the seat backrest forward :
Seat backrest release lever
; Rear bench seat release lever
i Open the rear doors. This allows you
better access to release lever :.
X Remove the center head restraint
(Y page 78).
X Pull release lever :.
The corresponding seat backrest is
released.
X Fold the seat backrest forward until it
engages. Folding the seat backrest back X
Pull release lever : and fold the seat
backrest backwards.
! Make sure that the seat belt does not
become trapped

when folding the rear seat
backrest back. Otherwise, it could be
damaged.
X Fold the seat backrest back until it engages
audibly in the seat catch.
X Install the head restraints (Y page 78).
Folding the rear bench seat forward X
Fold the backrest forwards (
Y page 191).
X Pull release lever ;.
The corresponding rear bench seat is
released.
X Fold the rear bench seat forward until it
engages.
Folding the rear bench seat into an
upright position X
Fold back the rear bench seat backrest
until it engages audibly in the seat catch.
X Fold the backrest backwards
( Y page 191).
X Install the head restraints (Y page 78). G
WARNING
Make sure that the rear bench seat and front
seat backrest are correctly engaged in
position.
If the seat backrests or rear bench seat are
not fully engaged and the following occurs:
R sharp braking
R a sudden change of direction
R an accident
the seat

backrests or rear bench seat may fold
forwards and instead of being restrained by
the seats as intended you could be injured by
them. Occupants could then also be injured
in the event of an accident, e.g. by objects Stowage areas
191
Stowing and features
Z