2012 MERCEDES-BENZ G-Class instrument cluster

X
Press the & or * button to select a
scene. Navigation system menu
Displaying navigation instructions In the
Navigation menu: the instructions
from the navigation system appear in the
multifunction display. For more information,
see the separate operating instructions.
X Switch on COMAND (see the separate
operating instructions).
X Press the V or U button on the
steering wheel to select the Navigation
menu.
Route guidance inactive The direction of travel appears in the
multifunction display. If the name of the
street is part of the navigation system data,
this will also be displayed.
Route guidance active
The multifunction display shows navigation
instructions, for example: Settings menu
Introduction In the
Settings menu, you have the following
options:
R restoring the factory settings
R changing the instrument cluster settings
R changing the light settings
R changing the vehicle settings
R changing the convenience settings
Resetting to factory settings For safety reasons, not all functions are reset:
the Headlamp mode function in the
Lighting
submenu

is only reset if the vehicle
is stationary. 158
Menus and submenus
On-board computer and displays

X
Press the V or U button on the
steering wheel to select the Settings
menu.
X Press and hold the reset button on the left
of the
instrument cluster for approximately
three seconds.
A prompt appears in the multifunction
display asking you to confirm by pressing
the reset button again.
X Press the reset button again.
The settings

of most functions are restored
to the factory settings.
or
X If you want to retain the settings, do not
press the reset button a second time.
The Settings menu appears again after
approximately five seconds.
X Press the V or U button to select a
different menu.
Instrument cluster Selecting the unit of measurement for
distance
The selected unit of measurement for
distance applies to:
R
the odometer and the trip odometer
R the trip computer
R the digital speedometer
X Press the V or U button on the
steering wheel to select the Settings
menu.
X Press the & button
to select submenus.
X Press the W or X
button to select the
Inst. Cluster submenu.
X Press the & button to select Disp.
Unit Speed-/Odom.
X Press the W or X button to select
Km (kilometers) or Miles as the unit of
measurement for distance.
X Press the &, V or U button to
select a different display. Selecting the language
The Language function allows you to select
the language for the instrument cluster.
X
Press the V or U button on the
steering wheel to select the Settings
menu.
X Press the & button
to select submenus.
X Press the W or X
button to select the
Inst. cluster submenu.
X Press the & button
to select Language.
X Press the W or X
button to select the
desired language.
X Press the &, V or U button to
select a different display.
Selecting the status line display
X Press the V or U button on the
steering wheel to select the Settings
menu.
X Press the &
button
to select submenus.
X Press the W or X
button to select the
Inst. cluster submenu.
X Press the & button to select Status
line display.
X Press the W or X
button to select the
status line display: speed ( Speed) or
outside temperature ( Outside temp.).
The selected display now appears
constantly in the lower multifunction
display. When you scroll through the
Standard display menu (Y page 156), you
will see the display you have not selected.
X Press the &, V or U button to
select a different display.
Lights Adjusting the instrument cluster lighting
The instrument cluster lighting automatically
adjusts to the ambient light.
X
To brighten or to dim: turn reset button
(Y page 25) clockwise or
counterclockwise. Menus and submenus
159
On-board computer and displays Z

unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
X Press the V or U button on the
steering wheel to select the Settings
menu.
X Press the & button
to select submenus.
X Press the W or X
button to select the
Convenience submenu.
X Press the & button to select the Easy-
entry Function.
X Press the W or X button to activate
or deactivate the Easy-entry Function.
X Press the &, V or U button to
select a different display. Trip computer menu
Trip computer "From start" or "From
reset" The values in the
From Start
submenu are
calculated from the start of a journey,
whereas the values in the From Reset
submenu are

calculated from the last time the
submenu was reset.
X Press the V or U button to select
From Start. Example: trip computer "From start"
:
Distance
; Time =
Average speed
? Average fuel consumption
X Press the
& button to select
From
Start or the * button to select From
Reset in the submenu. Example: trip computer "From reset"
:
Distance
; Time
= Average speed
? Average fuel consumption
The trip computer From Start is
automatically reset if:
R the ignition

has been switched off for more
than four hours.
R 999 hours have been exceeded.
R 9,999 miles have been exceeded.
If 9,999 hours or 99,999 kilometers are
exceeded, the trip computer From Reset is
automatically reset.
Resetting X
Press the
V or U button to select
From Start.
X Press the &
or *
button to select the
function that you wish to reset.
X Press and hold the reset button on the left
of the instrument cluster until the values
have reverted to "0".162
Menus and submenus
On-board computer and displays

Display messages
General notes
G
WARNING
All categories of messages contain important information which should be taken note of and,
where a
malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz
Center.
Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz
Limited Warranty, or result in property damage or personal injury.
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may differ from the messages shown in the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in
this Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone. Hiding display messages
You can hide some display messages with a low priority.
X Press
the
V, U, & or *
button on the steering wheel to select another display.
or
X Press the reset button on the instrument cluster ( Y page 25).
The display message is cleared.
Display messages with a high priority are shown in red.
You cannot hide display messages of the highest priority. The multifunction display shows
these messages continuously until the causes for the messages have been remedied. Message memory menu
The on-board

computer saves certain display messages. You can call up the display messages
in the message memory menu.
The message memory menu is only shown if any display messages have been stored.
X Press the V or U button repeatedly, until either the original menu or the message
memory menu is shown.
If there are display messages, the multifunction display shows 2 Messages, for example.
X Press the & or * button to scroll through the display messages.
When the ignition is switched off, all display messages are deleted apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted. Display messages
165
On-board computer and displays Z

Display messages Possible causes/consequences and
M Solutions©
TC
Shift
Procedure
Canceled The gear change process was not carried out.
X
Repeat the gearshift process. ©
TC Shift
Conditions Not
Fulfilled One or more conditions to shift the transfer case have not been
fulfilled.
X
Repeat the gearshift process. ©
TC In Neutral The transfer case is in the neutral position.
X
Shifting the transfer case into HIGH or LOW.©
Transfer Case
Service Required There is a malfunction in the transfer case.
X
Do not shift the transfer case.
X Have the vehicle checked as soon as possible at a qualified
specialist workshop. G
WARNING
If the transfer case is in Neutral,
the
park position P of the automatic transmission will not hold
the vehicle. The parking brake must be engaged to hold the vehicle in place. Warning and indicator lamps in the instrument cluster
Seat belts
Problem Possible causes/consequences and
M Solutions7
After starting the
engine, the red seat
belt
warning

lamp lights
up for six seconds. The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
X
Fasten your seat belt ( Y page 41).7
After starting the
engine, the red seat
belt
warning

lamp lights
up. In addition, a
warning tone sounds
for up to six seconds. G
Risk of injury
The driver's seat belt is not fastened.
X Fasten your seat belt ( Y page 41).
The warning tone ceases. 178
Warning and indicator lamps in the instrument cluster
On-board computer and displays

Problem Possible causes/consequences and
M Solutions7
The red seat belt
warning lamp lights up
after the engine starts,
as soon as the driver's
or the front-passenger
door is closed.
G
Risk of injury
The driver or front passenger has not fastened their seat belt.
X Fasten your seat belt ( Y page 41).
The warning lamp goes out. G
Risk of injury
There are objects on the front-passenger seat.
X Remove the objects from the front-passenger seat and stow
them in a secure place.
The warning lamp goes out. 7
The red seat belt
warning lamp flashes
and an intermittent
audible warning
sounds.
G
Risk of injury
The driver or front passenger has not fastened their seat belt. In
addition, you
are driving faster than 15 mph (25 km/h) or you have
briefly driven faster than 15 mph (25 km/h).
X Fasten your seat belt ( Y page 41).
The warning
lamp goes out and the intermittent audible warning
ceases. G
Risk of injury
There are objects on the front-passenger seat. In addition, you are
driving faster than 15 mph (25 km/h ) or you have briefly driven
faster than 15 mph (25 km/h

).
X Remove the objects from the front-passenger seat and stow
them in a secure place.
The warning

lamp goes out and the intermittent audible warning
ceases. Warning and indicator lamps in the instrument cluster
179
On-board computer and displays Z

Safety systems
Problem Possible causes/consequences and
M Solutions
$ (USA only)
J (Canada only)
The red brake system
warning lamp

comes on
while the vehicle is
moving. A warning tone
also sounds. You are driving with the parking brake applied.
X
Release the parking brake.
The warning lamp goes out and the warning tone ceases. $
(USA only)
J (Canada only)
The red brake system
warning lamp

comes on
while the engine is
running. G
Risk of accident
There is not enough brake fluid in the brake fluid reservoir.
X Pull
over and stop the vehicle safely as soon as possible, paying
attention to

road and traffic conditions. Do not continue driving
under any circumstances.
X Engage the parking brake.
X Consult a qualified specialist workshop immediately.
X Observe the additional display messages in the multifunction
display.
Do not add brake fluid. This will not rectify the malfunction. G
WARNING
Driving
with the brake warning lamp illuminated can result in an accident. Have your brake system
checked immediately

if the brake warning lamp stays on. Do not add brake fluid before checking
the brake system.
Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the
brake fluid catching fire. You can be seriously burned. 180
Warning and indicator lamps in the instrument cluster
On-board computer and displays

Problem Possible causes/consequences and
M Solutions!
The
yellow
ABS warning
lamp is lit while the
engine is running. G
Risk of accident
ABS (Anti-lock Brake System) is deactivated due to a malfunction.
Therefore, BAS

(Brake Assist), ESP ®
(Electronic Stability Program),
EBD (electronic brake force distribution) and 4ETS are also
deactivated.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X Observe the additional display messages in the multifunction
display.
X Drive on carefully.
X Visit a qualified specialist workshop.
If the ABS control unit is defective, other systems, such as the
navigation system or the automatic transmission, may also be
unavailable. !
The
yellow

ABS warning
lamp is lit while the
engine is running. G
Risk of accident
The on-board voltage is too low. ABS has been deactivated due to
undervoltage.
ESP ®
, BAS, EBD and 4ETS are therefore also deactivated, for
example.
The brake

system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X Observe the additional display messages in the multifunction
display.
X Drive on carefully.
X Switch off consumers that are not required, e.g. the rear window
defroster or interior lighting.
ABS will be available again as soon as the vehicle's on-board
electrical system voltage increases.
If the warning lamp is still on:
X Have the battery and alternator checked at a qualified specialist
workshop. !
The
yellow

ABS warning
lamp is lit while the
engine is running. You have engaged the differential locks. ABS, BAS, EBD, ESP
®
and
4ETS are deactivated.
X Disengage the differential locks.
Subsequently, ABS, BAS, EBD, ESP ®
and 4ETS are reactivated. Warning and indicator lamps in the instrument cluster
181
On-board computer and displays Z