2012 MERCEDES-BENZ E-Class WAGON garage door opener

ESP®
(Electronic Stability
Program) AMG menu (on-board computer) ...230
Deactivating/activating (AMG
vehicles) .......................................... 67
Deactivating/activating (except
AMG vehicles) ................................ 224
Deactivating/activating (notes;
except AMG vehicles) ......................66
Display message ............................ 235
ETS/4ETS ........................................ 66
Function/notes ................................ 66
Important safety information ...........66
Warning lamp ................................. 264
ETS/4ETS (Electronic Traction
System) ................................................ 66
Exhaust check ................................... 170
Exhaust tail pipe (cleaning
instructions) ...................................... 318
Exterior lighting see Lights
Exterior mirrors
Adjusting ....................................... 109
Dipping (automatic) .......................110
Folding in/out (automatically) .......110
Folding in/out (electrically) ...........109
Folding in when locking (on-board
computer) ...................................... 230
Out of position (troubleshooting) ...110
Setting ........................................... 110
Storing settings (memory
function) ........................................ 111
Storing the parking position ..........110
Eyeglasses compartment ................. 275
F
Filler cap see Fuel filler flap
First-aid kit ......................................... 322
Flat tire Changing a wheel/mounting the
spare wheel ................................... 329
MOExtended run-flat system .........334
Preparing the vehicle .....................325
Raising the vehicle .........................330
TIREFIT kit ...................................... 326
Floormat ............................................. 306
Folding bench seat (cargo
compartment) .................................... 103
Front fog lamps ................................. 116
Display message ............................ 243
Switching on/off ........................... 116
Front windshield
see Windshield
Fuel
Additives ........................................ 386
Consumption statistics ..................219
Displaying the current
consumption .................................. 219
Displaying the range ......................219
Driving tips .................................... 170
Fuel gauge ....................................... 29
Important safety notes ..................385
Premium-grade unleaded gasoline . 385
Problem (malfunction) ...................164
Refueling ........................................ 160
Specifications ................................ 385
Tank content/reserve fuel .............384
Fuel filler flap
Emergency release ........................163
Opening/closing ............................ 162
Fuel filter (display message) ............ 248
Fuel level Calling up the range (on-board
computer) ...................................... 219
Fuel tank
Capacity ........................................ 384
Problem (malfunction) ...................164
Fuse allocation chart (vehicle tool
kit) ...................................................... 322
Fuses Allocation chart ............................. 343
Before changing ............................. 343
Fuse box in the cargo
compartment ................................. 344
Fuse box in the engine
compartment ................................. 343
Fuse box in the trunk .....................343
Important safety notes ..................342
G
Garage door opener Clearing the memory .....................305
Notes ............................................. 302
10Index

R
RACE START (AMG vehicles) ............. 188
RACETIMER (on-board computer) .... 231
Radar sensor system Activating/deactivating .................229
Display message ............................ 250
Radiator cover ................................... 309
Radio Selecting a station .........................221
see separate operating instructions
Reading lamp ..................................... 120
Rear axle level control (AMG
adaptive sport suspension
system) .............................................. 191
Rear compartment Setting the airflow .........................137
Setting the air vents ......................141
Setting the temperature ................136
Rear fog lamp
Display message ............................ 244
Switching on/off ........................... 116
Rear seat
Display message ............................ 258
Folding the backrest forwards/
back ............................................... 279
Rear sill protector ............................. 287
Rear view camera Cleaning instructions .....................318
Function/notes ............................. 198
Rear-view mirror
Anti-glare (manual) ........................109
Dipping (automatic) .......................110
Rear window blind ............................ 292
Rear window defroster Problem (malfunction) ...................139
Rear window heating
Switching on/off ........................... 139
Rear window wiper
Replacing the wiper blade .............. 126
Switching on/off ........................... 125
Refueling
Fuel gauge ....................................... 29
Important safety notes ..................160
Refueling process ..........................162
see Fuel
Remote control
Garage door opener .......................302Reporting
Malfunctions relevant to safety ........ 25
Reserve (fuel tank)
see Fuel
Reserve fuel
Display message ............................ 248
Warning lamp ................................. 267
see Fuel
Residual heat (climate control) ........ 140
Restraint system see SRS (Supplemental Restraint
System)
Retaining hook .................................. 282
Reverse gear Engaging (automatic
transmission) ................................. 152
Reversing lamps (display
message) ............................................ 244
Roadside Assistance (breakdown) .... 23
Roller blind see Roller sunblind
Roller sunblind
Panorama roof with power tilt/
sliding panel ..................................... 95
Rear side windows .........................291
Rear window .................................. 292
Roof carrier ........................................ 288
Roof lining and carpets (cleaning
guidelines) ......................................... 320
Roof load (maximum) ........................ 390
Route see Route guidance (navigation)
Route guidance (navigation) ............ 220
S
Safety Children in the vehicle .....................56
Child restraint systems ....................56
Occupant Classification System
(OCS) ............................................... 44
Overview of occupant safety
systems ........................................... 38
Safety systems
see Driving safety systems
Index15

Overhead control panelFunctionPage:u Switches the rear
interior lighting on/off
121
;| Switches the
automatic interior lighting
control on/off
120
=p Switches the right-
hand reading lamp on/off
120
?3 Opens/closes the
sliding sunroof
94
3 Opens/closes the
panorama roof with power
tilt/sliding panel and roller
sunblinds
94
Aï Button for MB Info call
(mbrace system)
299
BG SOS button (mbrace
system)
297
FunctionPageCRear-view mirror110DIntegrated electronic
compass
305
EButtons for the garage door
opener
302
FMicrophone for mbrace
(emergency call system),
telephone and the Voice
Control System 2GF
Roadside Assistance
button (mbrace system)
298
Hp Switches the left-
hand reading lamp on/off
120
Ic Switches the front
interior lighting on/off
1212 Observe the additional operating instructions.Overhead control panel35At a glance

Garage door opener
Important safety notes
The HomeLink ®
garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems.
i Certain garage door drives are
incompatible with the integrated garage
door opener. If you have difficulty
programming the integrated garage door
opener, contact an authorized Mercedes-
Benz Center or call one of the following
telephone hotlines:
R USA: Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
R Canada: Customer Service at
1-800-387-0100
GWARNING
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
potential harm or damage. When
programming a garage door opener, the door
moves up or down. When programming a gate
operator, the gate opens or closes.
Do not use the integrated remote control with
any garage door opener that lacks safety stop
and reverse features as required by U.S.
federal safety standards (this includes any
garage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the door
to stop and reverse - does not meet current
U.S. federal safety standards.
When programming a garage door opener,
park vehicle outside the garage.
Do not run the engine while programming the
integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide (CO),
and inhaling it can cause unconsciousness
and possible death. All exhaust gas contains
carbon monoxide (CO), and inhaling it can
cause unconsciousness and possible death.
i USA only:
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
FCC ID: CB2HMIHL4
i Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause interference,
and
2. this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
IC: 279B-HMIHL4
Programming the integrated garage
door opener on the rear-view mirror
Programming
GWARNING
Only press the transmitter button on the
integrated garage door opener if there are no
persons or objects present within the sweep
of the garage door. People could otherwise be
injured by the movement of the door.
302FeaturesStowing and features

Integrated garage door opener on the rear-view
mirror
Garage door remote control A is not part of
this integrated garage door opener.
i To achieve the best result, insert new
batteries in garage door remote control
A before programming.
XBefore programming for the first time, clear
the memory of the integrated garage door
opener ( Y page 305).XTurn the SmartKey to position 2 in the
ignition lock.XPress and hold one of transmitter
buttons ; to ? on the integrated garage
door opener.
Indicator lamp : starts to flash yellow
after a short period.
i Indicator lamp : flashes yellow
immediately after the transmitter button
has been stored for the first time. If the
transmitter button has already been
programmed, indicator lamp : does not
flash yellow until 10 seconds have elapsed.
XRelease the transmitter button.XPoint transmitter button B of garage door
remote control A towards the transmitter
buttons on the rear-view mirror at a
distance of 2 to 8 inches (5 to 20 cm).
i The distance required between garage
door remote control A and the integrated
garage door opener depends on the system
of the garage door drive. You might require
several attempts. You should test every
position for at least 25 seconds before
trying another position.XPress and hold transmitter button B on
garage door remote control A until
indicator lamp : lights up green.
Programming is complete if indicator
lamp : lights up or flashes green.XRelease transmitter button ;, = or ? on
the integrated garage door opener and the
transmitter button on garage door remote
control B.
If indicator lamp : lights up red:
XRepeat the programming procedure for the
transmitter button. When doing so, vary the
distance between the garage door remote
control and the rear-view mirror.
i If the indicator lamp flashes green after
successful programming, the garage door
system is operating on a rolling code. After
programming, you must synchronize the
garage door opener integrated in the rear-
view mirror with the receiver of the garage
door system.
Synchronizing the rolling code
Your vehicle must be within range of the
garage or gate opener drive. Make sure that
neither your vehicle nor any persons/objects
are present within the sweep of the door or
gate.
Observe the safety notes when performing
the rolling code synchronization.
XTurn the SmartKey to position 2 in the
ignition lock.XPress the programming button of the door
or gate drive (see the door or gate drive
operating instructions, e.g. under
"Programming of additional remote
controls").
i You now normally have 30 seconds to
initiate the next step.
XPress the previously programmed
transmitter button of the HomeLink ®Features303Stowing and featuresZ

integrated garage door opener repeatedly
in succession until the door opens.
The rolling code synchronization is then
complete.
Notes on programming the remote
control
Canadian radio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds.
These signals may not therefore last long
enough for the integrated garage door opener
to recognize the signal during programming.
Comparable with Canadian law, some U.S.
garage door openers also have a built-in
"interruption".
If you live in Canada or have difficulties
programming the garage door opener
(regardless of where you live) when using the
programming steps (see above), proceed as
follows:
XPress and hold one of transmitter
buttons ; to ? of the integrated garage
door opener.
Indicator lamp : starts to flash yellow
after a short period.XRelease the transmitter button.XPress transmitter button B of the garage
door remote control and hold for two
seconds, then release for two seconds,
then press again and hold for two seconds.XRepeat this sequence on transmitter
button B of the garage door remote
control until indicator lamp : is green.
Repeat the process if indicator lamp :
turns red.XContinue with the other programming
steps (see above).
Problems when programming
If you are experiencing problems
programming the integrated garage door
opener on the rear-view mirror, take note of
the following instructions:
R check the transmission frequency of
garage door remote control A (usually
found on the reverse side of the remote
control).
The integrated garage door opener is
compatible with devices that can be
operated with units in a frequency range of
280 to 390 MHz.
R change the batteries in garage door remote
control A. This increases the probability
that garage door remote control A will
send a strong and precise signal to the
integrated garage door opener on the rear-
view mirror.
R when programming, hold garage door
remote control A at different distances
and angles from the transmitter button that
you are programming. Try different angles
at a distance between 2 and 12 inches (5
to 30 cm) or the same angle at varying
distances.
R if another remote control for the same
garage door drive is available, repeat the
same programming steps with this remote
control. Before you perform the steps of the
operation, make sure that there are new
batteries in the garage door remote
control.
R note that some remote controls only
transmit for a limited amount of time (the
indicator lamp on the remote control goes
out). Press the remote control button again
before it stops transmitting.
R align the antenna cable of the garage door
opener unit. This can improve signal
reception/transmission.
Opening/closing the garage door
Once programmed, the integrated garage
door opener will assume the function of the
garage door system's remote control. Please
also read the operating instructions for the
garage door system.
304FeaturesStowing and features

XTurn the SmartKey to position 2 in the
ignition lock.XPress transmitter button ;, = or ? in the
overhead control panel that you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamp : lights up green.
Garage door system with a rolling code:
indicator lamp : flashes green.
i
The transmitter will transmit a signal for
as long as the transmitter button is being
pressed. After a maximum of ten seconds,
transmission is terminated and indicator
lamp : flashes yellow. Press the
transmitter button again, if necessary.
Clearing the memory of the integrated
garage door opener on the rear-view
mirror
XTurn the SmartKey to position 2 in the
ignition lock.XPress transmitter buttons ; and ?.
The indicator lamp lights up yellow.XPress and hold transmitter buttons ;
and ? until the indicator lamp turns green.
i
Make sure that you clear the memory of
the integrated garage door opener before
selling the vehicle.
Compass
Calling up the compass
To obtain a correct display in rear-view
mirror :, the compass must be calibrated
and the magnetic field zone must be set.XPress button = briefly.
The compass shows which direction the
vehicle is currently traveling in: N, NE , E , SE ,
S , SW , W or NW.
Setting the compass
XDetermine your position using the following
zone maps.
North America zone map
South America zone map
Features305Stowing and featuresZ