2012 MERCEDES-BENZ E-Class SEDAN brakes

[x] Cancel search: brakes

Page 178 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual GWARNING
The cruise control brakes automatically so
that the set speed is not exceeded.
Cruise control lever
:To switch on or to increase the speed;To switch on or to reduce the speed=To deactivate cr

Page 179 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual overtake, cruise control adjusts the
vehicles speed to the last speed stored
after you have finished overtaking.
Making adjustments in 1 mph  (Canada:
1 km/h) incrementsXBriefly press the cruise cont

Page 181 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual GWARNING
The "Resume" function should only be
operated if the driver is fully aware of the
previously set speed and wishes to resume
this particular preset speed.
GWARNING
Your undivided attention to

Page 183 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual instrument cluster should be activated
( Y  page 224).XKeep the cruise control lever pressed
up  : or down  ; until the desired speed
is set.
i You can use the cruise control lever to set
the stored s

Page 184 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual The DISTRONIC PLUS braking effect is
canceled and the vehicle can start moving if:
R DISTRONIC PLUS is deactivated using the
cruise control lever.
R you accelerate.
R there is a malfunction in the sys

Page 187 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual speed stored after you have finished
overtaking.
DISTRONIC PLUS is automatically
deactivated if:
R you apply the parking brake.
R you are driving slower than
15 mph (25 km/h) and there is no vehicle
i

Page 189 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R when pulling away, especially on steep
slopes
R when maneuvering on steep slopes
R when waiting in tr

Page 195 of 396

MERCEDES-BENZ E-Class SEDAN 2012 W212 Owners Manual Range of the sensors
General notes
The sensors must be free of dirt, ice and
slush; otherwise they may not function
correctly. Clean the sensors regularly, taking
care not to scratch or damage them
(
Page:   < prev 1-8 9-16 17-24 25-32 next >