2012 MERCEDES-BENZ CLS SHOOTING BRAKE wipers

[x] Cancel search: wipers

Page 6 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Index
....................................................... 4Introduction
......................................... 22 At
ag lance ........................................... 27 Safety
.............

Page 24 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Wheels
Changing/replacing .......................362
Changing awheel .......................... 362
Checking ........................................ 355
Cleaning .....................................

Page 116 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Useful information
............................114
Exterior lighting ................................ 114
Interior lighting ................................. 122
Replacing bulbs ......................

Page 117 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Useful information
i This Owner's Manual describes all mod-
els, series and optional equipment for your
vehicle that were available at the time of
going to press. National variations are pos-
sibl

Page 118 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Automatic headlamp mode
G
WARNING
If the ligh tswitch is set to Ãand it is foggy,
snowing or there is poor visibility, the dipped-
beam headlamps will not come on automati-
cally. This could endange

Page 119 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Even if the ligh
tsensor does not detec tthat
is dark, the side lamps and dipped-beam
headlamps switch on when the key is inserted
into the ignition lock and the light switch is
set to the Lposition.

Page 120 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Parking lamps
1W
Left-hand parking lamps
2X Right-hand parking lamps
3T Side lamps, licence plate and instru-
ment cluster lighting
4Ã Automatic headlamp mode, control-
led by the light sensor
5L Dip

Page 121 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual X
To switch on the main-beam head-
lamps: turn the key in the ignition lock to
position 2or start the engine.
X Turn the light switch to LorÃ.
X Press the combinatio nswitc hbeyond the
pressure point
Page:   1-8 9-16 17-24 25-32 32 next >