2012 MERCEDES-BENZ CLS-Class trunk

[x] Cancel search: trunk

Page 75 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
The Product label with FCC ID and IC
certification number can be found in the
battery case of t

Page 77 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual If you pull on the handle of the trunk lid, only
the trunk of the vehicle is unlocked.
Changing the settings of the locking
system
You can change the setting of the locking
system in such a way that o

Page 81 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual ProblemPossible causes/consequences and M SolutionsThe engine cannot be
started using the
SmartKey.The on-board voltage is too low.XSwitch off non-essential consumers, e.g. seat heating or interior
li

Page 83 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual XTo deactivate: press and hold button  :
for about five seconds until a tone sounds.XTo activate:  press and hold button  ; for
about five seconds until a tone sounds.
i If you press one of the two bu

Page 84 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual iIf you lock the vehicle as described above,
the fuel filler flap is not locked. The anti-
theft alarm system is not armed.
Trunk
Important safety notes
Do not leave the SmartKey in the trunk. You
cou

Page 85 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual XPull handle :.XRaise the trunk lid.
Closing
GWARNING
To prevent possible personal injury, always
keep hands and fingers away from the trunk
opening when closing the trunk lid. Be
especially careful w

Page 86 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual You can close the trunk lid automatically by
using the closing button 3
 or locking button 4
.XTo close:  press closing button  : in the
trunk lid.XTo close and lock simultaneously:
Press locking butt

Page 87 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual XInsert the mechanical key into the trunk lid
lock as far as the stop.XTurn the mechanical key clockwise from
position  1 to position  2.XRemove the mechanical key.XInsert the mechanical key into the