2012 MERCEDES-BENZ CLS-Class keyless

[x] Cancel search: keyless

Page 76 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual 2. this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this
device could void the user’s auth

Page 77 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual If you pull on the handle of the trunk lid, only
the trunk of the vehicle is unlocked.
Changing the settings of the locking
system
You can change the setting of the locking
system in such a way that o

Page 80 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual Problems with the SmartKeyProblemPossible causes/consequences and M SolutionsYou cannot lock or
unlock the vehicle
using the SmartKey.The SmartKey battery is discharged or nearly discharged.XTry again

Page 81 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual ProblemPossible causes/consequences and M SolutionsThe engine cannot be
started using the
SmartKey.The on-board voltage is too low.XSwitch off non-essential consumers, e.g. seat heating or interior
li

Page 82 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual Unlocking and opening doors from
the inside
You can open a door from inside the vehicle
even if it has been locked. You can only open
the rear doors from inside the vehicle if they
are not secured by

Page 85 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual XPull handle :.XRaise the trunk lid.
Closing
GWARNING
To prevent possible personal injury, always
keep hands and fingers away from the trunk
opening when closing the trunk lid. Be
especially careful w

Page 86 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual You can close the trunk lid automatically by
using the closing button 3
 or locking button 4
.XTo close:  press closing button  : in the
trunk lid.XTo close and lock simultaneously:
Press locking butt

Page 87 of 356

MERCEDES-BENZ CLS-Class 2012 W218 Owners Manual XInsert the mechanical key into the trunk lid
lock as far as the stop.XTurn the mechanical key clockwise from
position  1 to position  2.XRemove the mechanical key.XInsert the mechanical key into the