2012 MERCEDES-BENZ B-CLASS engine oil capacity

E
EASY-VARIO-PLUS system Cargo compartment enlargement ..240
EBD (electronic brake force
distribution)
Display message ............................ 203
Function/notes ................................
64
ECO display
Function/notes ............................. 153
On-board computer ....................... 190
ECO start/stop function
Automatic engine start .................. 137
Automatic engine switch-off .......... 137
Deactivating/activating ................. 138
General information ....................... 136
Important safety notes .................. 136
Electronic Stability Program
see ESP ®
(Electronic Stability Program)
Emergency release
Driver's door .................................... 75
Vehicle ............................................. 75
Emergency spare wheel
General notes ................................ 325
Important safety notes .................. 325
Removing ....................................... 326
Technical data ............................... 326
Emergency Tensioning Devices
Activation ......................................... 39
Function ........................................... 49
Safety guidelines ............................. 40
Emergency unlocking
Tailgate ............................................ 76
Emissions control
Service and warranty information .... 21
Engine
Check Engine warning lamp ........... 231
Display message ............................ 212
ECO start/stop function ................ 136
Engine number ............................... 329
Irregular running ............................ 139
Jump-starting ................................. 289
Starting problems .......................... 139
Starting the engine with the
SmartKey ....................................... 135
Switching off .................................. 150
Tow-starting (vehicle) ..................... 294 Engine electronics
Problem (malfunction) ...................139
Engine oil
Adding ........................................... 268
Additives ........................................ 332
Checking the oil level ..................... 267
Checking the oil level using the
dipstick
.......................................... 268
Display message ............................ 214
Filling capacity ............................... 332
Notes about oil grades ................... 332
Notes on oil level/consumption .... 267
Viscosity ........................................ 332
ESP ®
(Electronic Stability
Program) Deactivating/activating ................. 194
Deactivating/activating (notes) ....... 63
Display message ............................ 201
ETS .................................................. 62
Function/notes ......................... 62, 63
Important safety information ........... 62
Warning lamp ................................. 227
ETS (Electronic Traction System) ....... 62
Exhaust check ................................... 152
Exhaust pipe (cleaning instructions) 275
Exterior lighting Setting options ................................ 98
see Lights
Exterior mirrors
Adjusting ......................................... 92
Dipping (automatic) .........................93
Folding in/out (automatically) ......... 93
Folding in/out (electrically) ............. 93
Folding in when locking (on-board
computer) ...................................... 199
Out of position (troubleshooting) .....93
Setting ............................................. 93
Storing settings (memory function) .. 95
Storing the parking position ............. 94
Eyeglasses compartment ................. 237 F
Filler cap see Fuel filler flap


First-aid kit ......................................... 280
Flat tire MOExtended tires .......................... 281 Index
9
ProCarManuals.com

Engine oil
General notes !
Never use engine oil or an oil filter of a
specification other than is necessary to
fulfill the prescribed service intervals. Do
not change the engine oil or oil filter in
order to achieve longer replacement
intervals than those prescribed. You could
otherwise cause engine
damage or damage
to the exhaust gas aftertreatment.
Follow the instructions in the service
interval display regarding the oil change.
Otherwise, you may damage the engine and
the exhaust gas aftertreatment.
When handling engine oil, observe the
important safety notes on service products
(Y page 329).
The engine oils are matched to the
performance of Mercedes-Benz engines and
service intervals. You should therefore only
use engine oils and oil filters that are
approved for vehicles with maintenance
systems.
For a list of approved engine oils and oil filters,
consult an authorized Mercedes-Benz
Center. Or visit the website
http://bevo.mercedes-benz.com.
The table shows which engine oils have been
approved for your vehicle. Model Engine
model MB
Approval B 250
BlueEFFICIENCY
270 229.5
i
MB approval is indicated on the oil
containers.
Filling capacities The following values refer to an oil change
including the oil filter.
Model Capacity
B 250 BlueEFFICIENCY
5.9 US qt (
5.6 l) Additives
!
Do not use

any additives in the engine oil.
This could damage the engine.
Engine oil viscosity Viscosity describes the flow characteristics
of a
fluid.

If an engine oil has a high viscosity,
this means that it is thick; a low viscosity
means that it is thin.
Select an engine oil with an SAE classification
(viscosity) suitable for the prevailing outside
temperatures. The table shows you which
SAE classifications are to be used. The low-
temperature characteristics of engine oils
can deteriorate significantly, e.g. as a result
of aging, soot and fuel deposits. It is therefore
strongly recommended that you carry out
regular oil changes using an approved engine
oil with the appropriate SAE classification. Brake fluid
G
WARNING
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid.

If the boiling point of the brake
fluid is too low, vapor pockets may form in the
brake system when the brakes are applied
hard. This would impair braking efficiency.
There is a risk of an accident.
You should have the brake fluid renewed at
the specified intervals. 332
Service products and filling capacities
Technical data
ProCarManuals.com

When handling brake fluid, observe the
important safety notes on service products
(Y page 329).
The brake
fluid
change intervals can be found
in the Maintenance Booklet.
Only use brake fluid approved by Mercedes-
Benz according to MB Approval 331.0.
Information about approved brake fluid can
be obtained at any qualified specialist
workshop or on the Internet at
http://bevo.mercedes-benz.com.
i Have the brake fluid renewed regularly at
a qualified specialist workshop. Coolant
Important safety notes G
WARNING
If antifreeze comes into contact with hot
components in the engine compartment, it
may ignite. There is a risk of fire and injury.
Let the engine cool down before you add
antifreeze. Make sure that antifreeze is not
spilled next to the filler neck. Thoroughly
clean the antifreeze

from components before
starting the engine.
! Only add coolant that has been premixed
with the desired antifreeze protection. You
could otherwise damage the engine.
Further information on coolants can be
found in the Mercedes-Benz Specifications
for Service Products, MB Specifications for
Service Products 310.1, e.g. on the
Internet at
http://bevo.mercedes-benz.com. Or
contact a qualified specialist workshop.
! Always use a suitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the engine cooling system is not
sufficiently protected from corrosion and
overheating. When handling coolant, observe the
important safety notes on service products
(Y page 329).
The coolant is a mixture of water and
antifreeze/corrosion inhibitor. It performs
the following tasks:
R
corrosion protection
R antifreeze protection
R raising the boiling point
If the coolant

has antifreeze protection down
to -35 ‡ (-37 †), the boiling point of the
coolant during operation is approximately
266 ‡ (130 †).
The antifreeze/corrosion inhibitor
concentration in the engine cooling system
should:
R be at least 50%. This will protect the engine
cooling system against freezing down to
approximately -35 ‡ (-37 †).
R not exceed 55% (antifreeze protection
down to -49 ‡ [-45 †]). Otherwise, heat
will not be dissipated as effectively.
If the vehicle has lost coolant, add equal
amounts of water and antifreeze/corrosion
inhibitor.
Mercedes-Benz recommends an antifreeze/
corrosion inhibitor concentrate in
accordance with MB Specifications for
Service Products 310.1.
The coolant is checked with every
maintenance interval at a qualified specialist
workshop.
i When the vehicle is first delivered, it is
filled with a coolant mixture that ensures
adequate antifreeze and corrosion
protection.
Filling capacities Model Capacity
B 250
BlueEFFICIENCY
Approx. 8.2 US qt
(7.8 l) Service products and filling capacities
333
Technical data Z
ProCarManuals.com