2012 MAZDA MODEL CX-7 display

15
Getting Started
Navigation Set Up
●You can alter the map display conditions, the route guidance conditions and show the
system information.
■Stop your vehicle before performing the following operations. Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
cause an accident.
Always stop the vehicle in a safe location and set the parking brake before operating the
system.
Before StepsSelect
Warning
Open the
[Navigation
Setup]
■Auto ZoomThe Auto Zoom function automatically switches the map scale depending
on the distance between the next guidance point and the current position.
Used to switch the Auto Zoom function.
■Map ColorUsed to switch the map mode.
■Map DirectionUsed to switch the map direction.
■Show POI IconsUsed to display the selected POI icons on the Map screen.
■Guidance VolumeUsed to adjust the guidance volume.
Also adjustable using the audio volume knob during
transmission of the voice guidance.
Day: To switch to the daytime screen.
Night: To switch to the nighttime screen.
Auto: The screen switches between
daytime and nighttime displays in
conjunction with the on/off of the
vehicle’s exterior lights.
North Up: Geographic north is up.
Head Up: The direction you are heading is up.
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

16
RoutingAddress
Book
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
■Arrival TimeThe time which is displayed until reaching the destination or a
way point can be set as an estimated arrival time or the
remaining time.
Select to display the estimated arrival time, or to
display the remaining time.
■Average SpeedSet the average speed for each road to be driven.
(This function sets the standard speed (average vehicle speed
for each route) used for calculating the estimated arrival time
when calculating the route time.)
■Edit Memory PointUsed to edit the memory point or Home setting.( page 36, 38)
■Delete Previous PointUsed to delete the previously set destination.
■Operation GuideUsed to switch the operating guide display.
Operation Guide
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

17
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
■Auto Complete TextWhen entering text, the system displays possible candidates of
words which may match the one you are trying to input. If the
system narrows down the candidate to one, the word is
automatically displayed.
Used to switch the auto complete text.
■Adjust Current PositionUsed to adjust the vehicle position if it deviates from the Map
screen.
■Restore DefaultsRestores the default settings.
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

18
RoutingAddress
Book
Getting Started
Screen Names and Functions
Screens Before Setting Route
(1) Map Direction
( page 15)
(2) Clock(3) TemperatureDisplays the ambient temperature.
(4) Vehicle marker Shows the current position and
direction of your vehicle. (5) Scale display
Displays the scale of the map.
(6) Current Road Name Shows the name of the road you are
currently driving on.
(7) Operation Guide Displays the operational guidance.
( page 16)
Screens During Route Guidance
(1) The traveled distance to the destination and the estimated arrival
time/remaining travel time
Displays the remaining time to the
destination.
Estimated arrival time to the destination
or the estimated remaining driving time
can be displayed by selecting either of
them. ( page 16) (2) Route display
Shows the provided route as a thick
blue line.
(3) Turn Arrow display
Shows the direction to turn at the next
junction and the distance to the junction.
(4) Next Guided Street Name display
(4)
(2)
(6)
(3)(5)
(1)(7)
(3)(1)
(2)
(4)
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

19
Getting Started
The screen map can be scaled to 14 different sizes.
■Brightness/Contrast
Brightness and contrast of the navigation screen can be adjusted.
1. Press the INFO switch to display the SETTINGS screen.
2. Select PREFERENCES and press the Enter switch.
3. Select SCREEN ADJUSTMENT and press the Enter switch.
4. Select BRIGHTNESS/CONTRAST and press the Enter switch.
5. Select BRIGHTNESS or CONTRAST using the left or right switch.
6. Adjust the tone by pressing the Enter switch up or down.
7. After setting, press the Enter switch to finish the setting.
■Daytime/Night screen
When the headlights are on, daytime mode can also be selected (if a brighter screen is
needed at night). This selection can only be done when the headlights are on.
● The screen can be returned to the daytime screen while the headlights or running lights are
on by pushing the dashboard illumination knob. You will hear a beep sound and the
illumination dimmer will be canceled. With each press of the dashboard illumination knob,
the dashboard illumination will change from dim to full bright and back to dim again.
Adjusting the Map Scale
Press the Enter switch up or down while the Map screen is displayed to
zoom in or out of the Map screen.
Screen Adjustments
Scale bar
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

20
RoutingAddress
Book
Getting Started
Character Entry
Street
Name, City
Name, and
Other
Input
Select the first several
characters on the
screen. (Step 1) Select your target
in the list.
(Step 2)
1.Press the Enter switch up or
down, select the letter, and press
the Enter switch. Pressing the
Enter switch with the cursor set
to Del erases one letter.
2.Set the cursor to Done and press the Enter switch. The Area
names, Point names, City
names, or Street names which
include the letters currently input
are displayed. ●
If a desired name is not in the
list, go back to Step 1, and try
fewer characters.
: The input character can be deleted.
: The list appears. : You can change the type of text.
●Examples
Street: CANAL Street: 52ND
Enter by selecting characters: Enter by selecting characters:
The name list including the
input spelling is displayed.
Street: MAIN STREET
Enter by selecting characters:
CA 5 2
MA
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

21
Getting Started
Register Home
Before StepsSelectSelect
( page 22)
(
page 26)
(
page 28)
(
page 26)
(
page 30)
(
page 30)
Open the
[Home] Menu
Ye s
Note
The Home registration screen is not displayed if home registration is already finished.
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã

25
Before
UseGetting
started
Routing
● For Character Entry, please refer to page 20.
nput the city name.
Select the city
name from the
list.Input the
street name.Select the
street name
from the list.
Input the
House
Number.
Select
Notes
● Once the destination is set, or is displayed for the following
destination settings.
● To add to the destinations, select and follow the same procedure as that
of the first destination setting.
● To re-set the destinations, select and follow the same procedure as that
of the first destination setting.
● The number of points which can be set as destinations are limited to two.Add toReplace
Add to
Replace
0#8687''DQQMMo+9Þ9Ü9Ý9Ý9å¬9Ý9äã“ã