2012 Lexus LFA clock setting

125
2-2. Instrument cluster
2
When driving
■Control pad
Press up, down, left and right on
the control pad to select and
change menu settings.
Pressing left changes the display as
follows:
Press: Returns to the previous
screen.
Press and hold: Returns to the nor-
mal display. (P. 116)
Brightness (
P. 1 4 7 ) Allows driver to adju
st the brightness of
the meter and interior illumination.
Settings
(  P. 1 4 8 ) Needle
Allows driver to change the needle
color for the tachometer.
Rev Peak Displays an afterimage of the tachome-
ter needle at th
e maximum engine
speed.
Clock Allows driver to adjust the displayed
time and choose between 12-hour (12H)
and 24-hour (24H) mode.
Shortcut Allows driver to jump to a preset display.
Units Changes units used to indicate distance,
speed and fuel consumption.
Te m p Changes the display temperature
between Fahrenheit and Celsius.
Language Changes the language displayed.
Wa r n i n g ( P. 322) Automatically displayed when a mal-
function occurs in one of the vehicle's
systems. (“Menu” is displayed when
there is no warning occurring.)
Menu itemFunction

148
2-2. Instrument cluster
“Settings”Settings for the meter display can be changed. (Settings cannot be
changed while the vehicle is in motion.) Select “Settings” and press right
on the control pad.
Select the desired setting and
press right on the control pad.
“Needle” (
P. 1 4 9 )
“Rev Peak” (
P. 150)
“Clock” (
P. 151)
“Shortcut” (
P. 153)
“Units” (
P. 1 5 4 )
“Temp” (
P. 1 5 4 )
“Language” (
P. 155)
STEP1
STEP2

157
2-2. Instrument cluster
2
When driving
■Using the “Lap Timer”
●When the “Lap Timer” function is turned “OFF” or the engine is stopped while a
lap is being timed, the lap timer will stop and the lap time up to that point will be
recorded.
●If the lap time being recorded ends with the same time as the fastest lap, the
newer time will be saved as the fastest lap time.
●If the lap time exceeds “9:59:59.99”, the display will return to “0:00:00.00” but
the total time will be recorded.
●If a warning message is displayed when a lap time is being measured, the lap
time will still continue to be recorded.
Operating the control pad while the warning message is shown returns the dis-
play to the stopwatch but the warning message will continue to appear until the
warning is resolved.
●In the normal display, the current measurement time and the latest lap time will
be displayed.
■Changing the temperature measurement unit
When the “Temp” measurement unit is ch anged, the air conditioning system tem-
perature setting, air outlet s and fan speed characteristic s may be changed. This is
normal and does not indicate a malfunction.
■If the battery is disconnected or discharges
“Lap Timer” data and “Clock” settings will be reset.

258
4-3. Do-it-yourself maintenance
Add oil based on the oil level shown on the meter.
Do not add more than 0.5 qt. (0.5 L, 0.4 Imp. qt.) at a time regardless of
the oil level reading.
To check the oil level again, install the oil filler cap by turning it
clockwise.
Check the oil level using the “Oil Level” display and repeat the
above procedure if more oil is required.
Even if the measurement result shows that the oil is below the maximum
level, be careful not to add more oil than necessary.
Install the oil filler cap by turning it clockwise.
■Engine oil consumption
●The amount of engine oil consumed depe nds on the oil viscosity, the quality of
the oil and the way the vehicle is driven.
●More oil is consumed under driving conditions such as high speeds and fre-
quent acceleration and deceleration.
●A new engine consumes more oil.
●When judging the amount of oil consumpt ion, keep in mind that the oil may
have become diluted, making it difficult to judge the true level accurately.
●Oil consumption: Max. 1.1 qt./600 miles (0.9 Imp. qt./600 miles, 1.0 L/1000
km)
●If your vehicle consumes more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles
(1000 km), contact your Lexus dealer.
■After the engine oil has been changed
The “Oil Maintenance” display on the mete r needs resetting. Have the display reset
at your Lexus dealer. ( P. 1 3 2 )
STEP4
STEP5
STEP6
STEP7