Page 259 of 420
257
4-3. Do-it-yourself maintenance
4
Maintenance and care
Engine oilDo not use the engine oil level di pstick in the engine compartment when
checking or adding engine oil, as it is only designed to be used for oil
replacement performed by your Lexu s dealer. Make sure to use the
meter for checking and adding engine oil.
■ Checking the engine oil
Check the oil level using the “Oil Level” display on the meter.
( P. 132)
■ Adding engine oil
If the oil level is low, add engine oil.
If unsure of how much oil to add,
contact your Lexus dealer.
Prepare the following item and brand of oil:
*: Measured using the “Oil Level” display on the meter, between the minimumand maximum markings
Check the oil level using the “Oil Level” display on the meter.
( P. 132)
Stop the engine.
Remove the oil filler cap by turning it counterclockwise.
Oil brand “Mobil 1 5W-50”
Oil quantity*
(MIN MAX) Approximately 2.1 qt. (2.0L, 1.8 Imp. qt.)
Item
Clean funnel
STEP1
STEP2
STEP3
Page 260 of 420

258
4-3. Do-it-yourself maintenance
Add oil based on the oil level shown on the meter.
Do not add more than 0.5 qt. (0.5 L, 0.4 Imp. qt.) at a time regardless of
the oil level reading.
To check the oil level again, install the oil filler cap by turning it
clockwise.
Check the oil level using the “Oil Level” display and repeat the
above procedure if more oil is required.
Even if the measurement result shows that the oil is below the maximum
level, be careful not to add more oil than necessary.
Install the oil filler cap by turning it clockwise.
■Engine oil consumption
●The amount of engine oil consumed depe nds on the oil viscosity, the quality of
the oil and the way the vehicle is driven.
●More oil is consumed under driving conditions such as high speeds and fre-
quent acceleration and deceleration.
●A new engine consumes more oil.
●When judging the amount of oil consumpt ion, keep in mind that the oil may
have become diluted, making it difficult to judge the true level accurately.
●Oil consumption: Max. 1.1 qt./600 miles (0.9 Imp. qt./600 miles, 1.0 L/1000
km)
●If your vehicle consumes more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles
(1000 km), contact your Lexus dealer.
■After the engine oil has been changed
The “Oil Maintenance” display on the mete r needs resetting. Have the display reset
at your Lexus dealer. ( P. 1 3 2 )
STEP4
STEP5
STEP6
STEP7
Page 261 of 420

259
4-3. Do-it-yourself maintenance
4
Maintenance and care
CAUTION
■Used engine oil
●Used engine oil contains potentially harmful contaminants which may cause skin
disorders such as inflammation or skin cancer, so care should be taken to avoid
prolonged and repeated contact. To remove used engine oil from your skin, wash
thoroughly with soap and water.
●Dispose of used oil and filters only in a safe and acceptable manner. Do not dis-
pose of used oil and filters in househol d trash, in sewers or onto the ground.
Call your Lexus dealer, service station or auto parts store for information con-
cerning recycling or disposal.
●Do not leave used engine oil within the reach of children.
NOTICE
■To prevent serious engine damage
Check the oil level on a regular basis.
■When adding the engine oil
●Be careful not to spill engine oil on the vehicle components.
●Avoid overfilling, or the engine could be damaged.
●Check the oil level using the “Oil Level” display on the meter every time you refill
the vehicle.
●Be sure the engine oil filler cap is properly tightened.
Page 262 of 420
260
4-3. Do-it-yourself maintenance
Engine coolantThe coolant level is satisfactory if it is between the “FULL” and “LOW”
lines on the reservoir when the engine is cold.
“LOW”
If the level is on or below the
“LOW” line, add coolant up to the
“FULL” line.
“FULL”
Reservoir cap
■Coolant selection
Only use “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol
based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life
hybrid organic acid technology.
“Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50% deionized
water. (Minimum temperature: -31 F [-35C])
For more details about coolant, contact your Lexus dealer.
■If the coolant level drops within a short time of replenishing
Visually check the hoses and engine coolant reservoir cap.
If you cannot find a leak, have your Lexus dealer test the cap and check for leaks in
the cooling system.
Page 263 of 420
261
4-3. Do-it-yourself maintenance
4
Maintenance and care
CondenserCheck the condenser and clear any foreign objects.
If it is extremely dirty or you are not sure of its condition, have your vehicle
checked by your Lexus dealer.
CAUTION
■When the engine is hot
Do not remove the engine coolant reservoir cap.
The cooling system may be under pressure and may spray hot coolant if the cap is
removed, causing burns or other injuries.
NOTICE
■When adding engine coolant
Coolant is neither plain water nor straight antifreeze. The correct mixture of water
and antifreeze must be used to provide proper lubrication, corrosion protection
and cooling. Be sure to read the antifreeze or coolant label.
■If you spill coolant
Be sure to wash it off with water to prevent it from damaging parts or paint.
CAUTION
■When the engine is hot
Do not touch the condenser, as it may be hot and cause burns.
Page 271 of 420

269
4-3. Do-it-yourself maintenance
4
Maintenance and care
CAUTION
■Emergency measures regarding electrolyte
●If electrolyte gets in your eyes
Flush your eyes with clean water for at least 15 minutes and get immediate medi-
cal attention. If possible, continue to apply water with a sponge or cloth while
traveling to the nearest medical facility.
●If electrolyte gets on your skin
Wash the affected area thoroughly. If you feel pain or burning, get medical atten-
tion immediately.
●If electrolyte gets on your clothes
It can soak through clothing on to your skin. Immediately take off the clothing and
follow the procedure above if necessary.
●If you accidentally swallow electrolyte
Drink a large quantity of water or milk. Fo llow with milk of magnesia, beaten raw
egg or vegetable oil. Get emergency medical attention immediately.
■When replacing the battery
Use a battery designed for the LFA. Failure to do so may cause gas (hydrogen) to
enter the passenger compartment, causing a fire or explosion.
For replacement of the battery, contact your Lexus dealer.
NOTICE
■Before disconnecting the battery terminal
Turn the ignition switch to the “LOCK” position and check that the gear indicator
turns off before disconnecting the battery terminal.
If the terminal is disconnected while the gear indicator is still displayed, the ASG
(Automated Sequential Gearbox) computer may be negatively affected, possibly
causing the engine not to start. If the term inal is accidentally disconnected while the
indicator is on, contact your Lexus dealer.
■When recharging the battery
Never recharge the battery while the engine is running. Also, be sure all accesso-
ries are turned off.
Page 289 of 420
287
4-3. Do-it-yourself maintenance
4
Maintenance and care
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If
this happens, check and replace the fuses as necessary.
Turn the ignition switch to the “LOCK” position.
Open the fuse box lid.
Engine compartment Push the tabs in and lift the lid off.
Driver's side instrument panel Remove the lid.
Passenger's side instrument panel Remove the lid.STEP1
STEP2
Page 290 of 420
288
4-3. Do-it-yourself maintenance
Luggage compartmentRemove the lid.
After a system failure, see “Fuse layout and amperage ratings”
( P. 290) for details about which fuse to check.
Remove the fuse with the pull-out
tool.
The pull-out tool is in the fuse box
of the engine compartment.
Check if the fuse has blown.
Ty p e A Normal fuse
Blown fuse
Replace it with one of an appropri-
ate amperage rating. The amper-
age rating can be found on the fuse
box lid.
STEP3
STEP4
STEP5