2012 Lexus IS220d ignition

1
2
3
4
5
6
IS250/220d/200d_EE
3
2-1. Driving procedures
Driving the vehicle ............. 142
Engine (ignition) switch ..... 153
Automatic transmission...... 158
Manual transmission .......... 165
Turn signal lever ................ 167
Parking brake ..................... 168
Horn ................................... 170
2-2. Instrument cluster
Gauges and meters ............. 171
Indicators and warning lights ....
177
Multi-information display .. 181
2-3. Operating the lights and
windshield wipers
Headlight switch ................ 186
Fog light switch.................. 190
Windshield wipers and
washer .............................. 191
Headlight cleaner switch .... 1972-4. Using other driving systems
Cruise control ..................... 198
Dynamic radar cruise
control .............................. 202
Lexus parking assist-sensor 217
Driving assist systems ........ 223
PCS (Pre-Crash Safety
system) ............................. 229
2-5. Driving information
Cargo and luggage ............. 237
Winter driving tips ............. 239
Trailer towing..................... 242
3-1. Using the air conditioning
system and defogger
Automatic air
conditioning system ......... 254
Power heater....................... 262
Rear window and outside
rear view mirror
defoggers .......................... 264
Windshield wiper de-icer ... 265
2When driving
3Interior features

IS250/220d/200d_EE
14
Pictorial indexInstrument panel
(Left-hand drive vehicles)
Headlight switch
Turn signal lever
Fog light switch P. 186
P. 167
P. 190Shift paddle switches  P. 160, 162
Gauges and meters
P. 171Multi-information display
P. 181Windshield wiper and washer switch P. 191
Trunk opener main switch P. 60
Glove box P. 356
Tilt and telescopic steering lock release lever 
P. 77Tilt and telescopic steering control switch  P. 78
Parking brake pedal (automatic transmission)
P. 168
Audio remote control switches *1P. 305
Engine (ignition) switch P. 153
Horn P. 170
Hood release lever P. 401

IS250/220d/200d_EE
22
Pictorial indexInstrument panel
(Right-hand drive vehicles)
Shift paddle switches 
P. 160, 162
Gauges and meters
P. 171
Multi-information display
P. 181
Windshield wiper
and washer switch
P. 191
Engine (ignition) switch
P. 153
Trunk opener
main switch
P. 60
Glove box P. 356
Tilt and telescopic steering
lock release lever

P. 77Tilt and telescopic
steering control switch

P. 78
Audio remote control switches
P. 305Parking brake pedal
(automatic transmission)
P. 168
Horn P. 170
Hood release lever
P. 401
Headlight switch
Turn signal lever
Fog light switch P. 186
P. 167
P. 190

59
1
1-2. Opening, closing and locking the doors and trunk
Before driving
IS250/220d/200d_EE
Locking the front doors from the outside without a key
Move the lock button to the lock position.
Close the door while pulling the door handle.
The door cannot be locked if the “ENGINE START STOP” switch
is in ACCESSORY or IGNITION ON mode, or the electronic key
is left inside the vehicle.
Depending on the position of the electronic key, the key may not be
detected correctly and the door may be locked.
Rear door child-protector lock
The door cannot be opened
from inside the vehicle when
the locks are set.
These locks can be set to pre-
vent children from opening the
rear doors. Push down on each
rear door switch to lock both
rear doors.
STEP1
STEP2

61
1-2. Opening, closing and locking the doors and trunk
1
Before driving
IS250/220d/200d_EESetting and canceling the function
To switch between setting and canceling, follow the procedure
below:
Close all the doors and switch the “ENGINE START
STOP” switch to IGNITION ON mode. (Perform the step 2
within 10 seconds.)
Shift the shift lever to P or N,
press and hold the driver’s door
lock switch (
or ) for
about 5 seconds then release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
*: Vehicles with an automatic transmission only
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
STEP1
STEP2
FunctionShift lever posi-
tionDriver’s door
lock switch posi-
tion
Shift position linked door lock-
ing function*
PShift position linked door
unlocking function*
Speed linked door locking func-
tion
NDriver's door linked door unlock-
ing function

67
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
IS250/220d/200d_EE
Your preferred driving position (the position of the driver's seat, steer-
ing wheel and outside rear view mirrors) can be memorized and
recalled with the touch of a button. It is also possible to set this func-
tion to activate automatically when the doors are unlocked.
Three different driving positions can be entered into memory.
Entering a position to memory
Switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear
view mirrors to the desired positions.
Push the “SET” button, then
within 3 seconds push button
“1”, “2” or “3” until the sig-
nal beeps.
If the selected button has
already been preset, the pre-
viously recorded position
will be overwritten.
Recalling the memorized position
Vehicles with an automatic transmission: Check that the shift
lever is set in P.
Vehicles with a manual transmission: Check that the parking
brake is set.
Switch to IGNITION ON mode.
Push button “1”, “2” or “3”
to recall the memorized posi-
tion.
STEP1
STEP2
STEP3
STEP1
STEP2
: If equipped

80
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Steering wheel (power-adjustable type)
Auto tilt away
When the “ENGINE START
STOP” switch is turned OFF,
the steering wheel returns to its
stowed position by moving up
and away to enable easier
driver entry and exit.
Switching to ACCESSORY or
IGNITION ON mode will
return the steering wheel to the
original position.
The steering wheel can be adjusted to a comfortable position.
Up
Down
Away from the driver
Toward the driver

81
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
IS250/220d/200d_EE
The steering wheel can be adjusted when
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION
ON mode.
Automatic adjustment of the steering position (vehicles with driving posi-
tion memory)
A desired steering position can be entered to memory and recalled automat-
ically by the driving position memory. (P. 6 6 )
Customization that can be configured at any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional
It is possible to deactivate the auto tilt-away function.
(Customizable featuresP. 556)
CAUTION
Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an acci-
dent, resulting in death or serious injury.