182
2-2. Instrument cluster
HS250h_U_75050U
■Outside temperature display
In the following situations, the correct outside temperature may not be displayed, or
the display may take longer than normal to change.
●When stopped, or driving at low speeds (less than 15 mph [25 km/h])
●When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
■When disconnecting and reconnecting battery terminals
The following information will be reset:
●Total distance/Total average fuel consumption
●Average fuel consumption after refueling
●Cruising range
●Average vehicle speed
■Customization
Settings (e.g. available languages) can be changed.
(Customizable features →P. 5 8 4 )
CAUTION
■Caution while driving
When operating the electronic feature control while driving, take extra notice of the
vehicle’s surrounding area.
NOTICE
■The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal informa-
tion display. At extremely low temperatures, the information display monitor may
respond slowly, and display changes may be delayed.
594
6-2. Customization
HS250h_U_75050U
Multi-information display (→P. 177)
Settings that can be changed using the multi-information switches
Av a i l a b l e u n i t smiles (MPG), km (km/l), km (l/100 km)
Available languagesEnglish, French and Spanish
■Vehicle customization
●When the “Speed-detecting automatic door lock function” and “Selecting other
than P position locks all doors” are both on, the door lock operates as follows.
• When any one of the shift position indicators other than P is illuminated, all the doors will be locked.
• If the vehicle is started with all the doors locked, the “Speed-detecting auto- matic door lock function” would not operate.
• If the vehicle is started with any door unlocked, the “Speed-detecting auto- matic door lock function” will operate.
●When the smart access system with push-button start is off, the “Smart door
unlocking function” cannot be customized.
●When the doors remain closed after unlocking the doors and the “Automatic
door lock function” activates, the signals will be generated in accordance with
the “Operation signal (emergency flashers)” and the “Operation signal (buzzer
volume)” settings.
■In the following situations, customize mode in which the settings can be changed
through the multi-information switches will automatically be turned off.
●A warning message appears after the customize mode screen is displayed.
●The “POWER” switch is turned off.
●The vehicle begins to move while the customize mode screen is displayed.
