2012 Lexus CT200h brake

1
2
3
4
5
6
3
CT200h_OM_OM76067E_(EE)
1-6. Refueling
Opening the fuel tank cap .. 131
1-7. Theft deterrent system
Immobilizer system ............ 135
Double locking system ....... 140
Alarm ................................. 142
1-8. Safety information
Correct driving posture ...... 149
SRS airbags ........................ 151
Airbag manual on-off
system .............................. 163
Child restraint systems ....... 166
Installing child restraints .... 176
2-1. Driving procedures
Driving the vehicle ............. 186
Power (ignition) switch ...... 198
EV drive mode ................... 204
Hybrid transmission ........... 207
Turn signal lever ................ 216
Parking brake ..................... 217
Horn ................................... 2182-2. Instrument cluster
Gauges and meters ............. 219
Indicators and warning
lights................................. 225
Multi-information display .. 229
2-3. Operating the lights and
windshield wipers
Headlight switch ................ 235
Fog light switch.................. 239
Windshield wipers and
washer .............................. 241
Rear window wiper and
washer .............................. 247
Headlight cleaner switch .... 249
2-4. Using other driving systems
Cruise control ..................... 250
Dynamic radar cruise
control .............................. 255
Lexus parking assist-sensor 273
Rear view monitor system.. 282
Driving assist systems ........ 291
Hill-start assist control ....... 296
PCS (Pre-Crash Safety
system) ............................. 299
2-5. Driving information
Cargo and luggage ............. 308
Winter driving tips ............. 311
Trailer towing..................... 315
2When driving

14
CT200h_OM_OM76067E_(EE)
Pictorial indexInstrument panel
(Left-hand drive vehicles)
Headlight switch
Turn signal lever
P. 235
P. 216
P. 239
Pre-crash braking off switch P. 300
Parking brake pedal P. 217
Hood lock release lever P. 492
Tilt and telescopic steering control lever
P. 115
Glove box
P. 449
Windshield wipers and washer switch
Rear window wiper and washer switch

P. 241
P. 247
Gauges and meters
Multi-information displayP. 219
P. 229
Air conditioning system*2
P. 318Rear window and outside rear view mir-
ror defogger switch
P. 329
Instrument panel
light control
dial
P. 221
Outside rear
view mirror
switches
P. 118
Clock*2 P. 459

24
CT200h_OM_OM76067E_(EE)
Pictorial indexInstrument panel
(Right-hand drive vehicles)
Headlight switch
Turn signal lever
Fog light switch P. 235
P. 216
P. 239
Pre-crash braking off switch P. 300
Parking brake pedal P. 217
Hood lock release lever P. 492
Tilt and telescopic steering control lever
P. 115
Air conditioning system*2
P. 318
Rear window and outside rear view mir-
ror defogger switch
P. 329
Glove box
P. 449
Windshield wipers and
washer switch
Rear window wiper and
washer switch

P. 241
P. 247
Gauges and meters
Multi-information displayP. 219
P. 229
Instrument panel
light control
dial
P. 221
Outside rear
view mirror
switches
P. 118
Clock*2 P. 459

31
CT200h_OM_OM76067E_(EE)
Installation of an RF-transmitter system
The installation of an RF-transmitter system in your vehicle could affect
electronic systems such as:
Multiport fuel injection system/sequential multiport fuel injection system
Cruise control system
Dynamic radar cruise control system
Anti-lock brake system
SRS airbag system
Seat belt pretensioner system
Be sure to check with any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional for precautionary measures or spe-
cial instructions regarding installation of an RF-transmitter system.
Further information regarding frequency bands, power levels, antenna posi-
tions and installation provisions for the installation of RF-transmitters, is
available on request at any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional.
High voltage parts and cables on the hybrid vehicles emit approximately the
same amount of electromagnetic waves as the conventional gasoline pow-
ered vehicles or home electronic appliances despite of their electromagnetic
shielding.
Unwanted noise may occur in the reception of the RF-transmitter.

40
1-1. Hybrid system
CT200h_OM_OM76067E_(EE)
Regenerative braking
In the following situations, kinetic energy is converted to electric energy
and deceleration force can be obtained in conjunction with the recharging of
the hybrid battery (traction battery).
The accelerator pedal is released while driving with the shift position in
D or B.
The brake pedal is depressed while driving with the shift position in D or
B.
EV indicator
Conditions in which the gasoline engine may not stop
The gasoline engine starts and stops automatically. However, it may not stop
automatically in the following conditions:
During gasoline engine warm-up
During hybrid battery (traction battery) charging
When the temperature of the hybrid battery (traction battery) is high or
low
When the heater is switched on
The EV indicator comes on when driving
the vehicle using only the electric motor
(traction motor).

42
1-1. Hybrid system
CT200h_OM_OM76067E_(EE)
Sounds and vibrations specific to a hybrid vehicle
There may be no engine sounds or vibration even though the vehicle is able
to move. For safety, apply the parking brake and make sure to shift the shift
position to P when parked.
The following sounds or vibrations may occur when the hybrid system is
operating and are not a malfunction:
Motor sounds may be heard from the engine compartment.
Sounds may be heard from the hybrid battery (traction battery) behind
the rear seats when the hybrid system starts or stops.
Sounds may be heard from the transmission when the gasoline engine
starts or stops, when driving at low speeds, or during idling.
Engine sounds may be heard when accelerating sharply.
Sounds may be heard due to regenerative braking when the brake pedal
is depressed and accelerator is loosened.
Other sounds, such as motors and mechanical noises, may be heard from
the brake system when the brake pedal is depressed.
Vibration may be felt when the gasoline engine starts or stops.
Cooling fan sounds may be heard from the air intake vent on the side of
rear right seatback.
Maintenance, repair, recycling, and disposal
Contact any authorized Lexus dealer or repairer, or another duly qualified
and equipped professional regarding maintenance, repair, recycling and dis-
posal. Do not dispose of the vehicle yourself.
Customization
Settings (e.g. on/off operation of the EV indicator) can be changed.
(Customizable features P. 667)

47
1-1. Hybrid system
1
Before driving
CT200h_OM_OM76067E_(EE)
CAUTION
Road accident cautions
If your vehicle is involved in an accident, observe the following precautions
to reduce the risk of death or serious injury:
Stop the vehicle in a safe place to prevent subsequent accidents.
While depressing the brake pedal, apply the parking brake and shift the
shift position to P to stop the hybrid system. Then, slowly release the
brake pedal.
Do not touch the high voltage parts, cables and connectors.
If electric wires are exposed inside or outside your vehicle, an electric
shock may occur. Never touch exposed electric wires.
If a fluid leak occurs, do not touch the fluid as it may be strong alkaline
electrolyte from the hybrid battery (traction battery). If it comes into con-
tact with your skin or eyes, wash it off immediately with a large amount of
water or, if possible, boric acid solution. Seek immediate medical atten-
tion.
If a fire occurs in the hybrid vehicle, leave the vehicle as soon as possible.
Never use a fire extinguisher that is not meant for electric fires. Using
even a small amount of water may be dangerous.
If your vehicle needs to be towed, do so with front wheels raised. If the
wheels connected to the electric motor (traction motor) are on the ground
when towing, the motor may continue to generate electricity. This may
cause an electricity leakage leading to a fire. (
P. 563)
Carefully inspect the ground under the vehicle. If you find that liquid has
leaked onto the ground, the fuel system may have been damaged. Leave
the vehicle as soon as possible.
Hybrid battery (traction battery)
Your vehicle contains a sealed nickel-metal hydride battery. If disposed of
improperly, it is hazardous to the environment and there is a risk of severe
burns and electrical shock that may result in death or serious injury.

54
1-1. Hybrid system
CT200h_OM_OM76067E_(EE)
Hybrid vehicle driving tips
For economical and ecological driving, pay attention to the following
points:
Using Eco drive mode
When using Eco drive mode, the torque corresponding to the accel-
erator pedal depression amount can be generated more smoothly
than it is in normal conditions. In addition, the operation of the air
conditioning system (heating/cooling) will be minimized, improv-
ing the fuel economy.
(P. 209)
Use of Hybrid System Indicator
The Eco-friendly driving is possible by keeping the indicate of
Hybrid System Indicator within Eco area. (P. 222)
When braking the vehicle
Make sure to operate the brakes gently and in good time. A greater
amount of electrical energy can be retained when slowing down.
Delays
Repeated acceleration and deceleration, as well as long waits at
traffic lights, will lead to bad fuel consumption. Check traffic
reports before leaving and avoid delays as much as possible. When
encountering a delay, gently release the brake pedal to allow the
vehicle to move forward slightly while avoiding overuse of the
accelerator pedal. Doing so can help control excessive gasoline
consumption.
Highway driving
Control your speed and keep at a constant speed. Also, before stop-
ping at a toll booth or similar, allow plenty of time to release the
ldllhbkA fli