2012 Lancia Flavia belt

EASY ENTRY SYSTEM
The Easy Entry lever is located on
upper seat belt anchor cover.
Pull the lever upward to move the seat
and seatback forward.
When returning the seat to its normal
position, the memory feature restores
the seat position and seatback recline
position to their current settings.
On the driver seat, pull the lever up-
ward to move the seatback forward.
When returning the seatback to its
normal position the memory feature
restores the seatback recline position
to its current setting.HEAD RESTRAINTS
Head restraints are designed to reduce
the risk of injury by restricting head
movement in the event of a rear im-
pact. Head restraints should be ad-
justed so that the top of the head
restraint is located above the top of
your ear.
WARNING!
The head restraints for all occupants
must be properly adjusted prior to
operating the vehicle or occupying a
seat. Head restraints should never be
adjusted while the vehicle is in mo-
tion. Driving a vehicle with the head
restraints improperly adjusted or re-
moved could cause serious injury or
death in the event of a collision.
Active Head Restraints — Front
Seats
Active Head Restraints are passive,
deployable components, and vehicles
with this equipment cannot be readily
identified by any markings, only
through visual inspection of the head
restraint. The head restraint will be
split in two halves, with the front half being soft foam and trim, the back
half being decorative plastic.
When AHRs deploy during a rear im-
pact, the front half of the head re-
straint extends forward to minimize
the gap between the back of the occu-
pant’s head and the AHR. This system
is designed to help prevent or reduce
the extent of injuries to the driver and
front passenger in certain types of
rear impacts. Refer to “Occupant Re-
straints” in “Things To Know Before
Starting Your Vehicle” for further in-
formation.
To raise the head restraint, pull up-
ward on the head restraint. To lower
the head restraint, press the push but-
ton, located at the base of the head
restraint, and push downward on the
head restraint.
Easy Entry Lever
Push Button
88

7. Air Bag Warning LightThis light will turn on for
four to eight seconds as a
bulb check when the igni-
tion switch is first turned to
ON/RUN. If the light is either not on
during starting, stays on, or turns on
while driving, have the system in-
spected at an authorized dealer as
soon as possible. Refer to “Occupant
Restraints” in “Things To Know Be-
fore Starting Your Vehicle” for further
information.
8. Seat Belt Reminder Light
When the ignition switch is first
turned to ON/RUN, this light
will turn on for four to eight
seconds as a bulb check. During the
bulb check, if the driver's seat belt is
unbuckled, a chime will sound. After
the bulb check or when driving, if the
driver seat belt remains unbuckled,
the Seat Belt Warning Light will flash
or remain on continuously. Refer to
“Occupant Restraints” in “Things To
Know Before Starting Your Vehicle”
for further information. 9. Oil Pressure Warning Light
This light indicates low engine
oil pressure. The light will
come on and remain on when the ig-
nition switch is turned from the OFF
to the ON/RUN position, and the light
will turn off after the engine is started.
If the bulb does not come on during
starting, have the system checked by
an authorized dealer.
If the light comes on and remains on
while driving, stop the vehicle and
shut off the engine. DO NOT OPER-
ATE THE VEHICLE UNTIL THE
CAUSE IS CORRECTED.
The light does not show the quantity
of oil in the engine. This can be deter-
mined using the procedure shown in
“Maintaining Your Vehicle”.
10. Engine Temperature Warning
Light This light warns of an over-
heated engine condition. As
engine coolant temperature
rise and the gauge approaches H, the
light will illuminate and a single
chime will sound after reaching a set
threshold. Further overheating will cause a continuous chime sound for
4 minutes or until the engine is al-
lowed to cool.
If the light turns on while driving,
safely pull over and stop the vehicle. If
the A/C system is on, turn it off. Also,
shift the transmission into NEUTRAL
and idle the vehicle. If the tempera-
ture reading does not return to nor-
mal, turn the engine off immediately
and call for service. Refer to “If Your
Engine Overheats” in “What To Do In
Emergencies” for further informa-
tion.
11. Brake Warning Light
This light monitors various
brake functions, including
brake fluid level and parking
brake application. If the brake light
turns on it may indicate that the park-
ing brake is applied, that the brake
fluid level is low, or that there is a
problem with the anti-lock brake sys-
tem.
The dual brake system provides a re-
serve braking capacity in the event of
a failure to a portion of the hydraulic
system. Failure of either half of the108

STARTING
PROCEDURES
Before starting your vehicle, adjust
your seat, adjust the inside and out-
side mirrors, fasten your seat belt, and
if present, instruct all other occupants
to buckle their seat belts.WARNING!
 When leaving the vehicle, alwaysremove the key fob from the igni-
tion and lock your vehicle.
 Never leave children alone in a
vehicle, or with access to an un-
locked vehicle. Allowing children
to be in a vehicle unattended is
dangerous for a number of rea-
sons. A child or others could be
seriously or fatally injured. Chil-
dren should be warned not to
touch the parking brake, brake
pedal or the shift lever.
 Do not leave the key fob in or near
the vehicle, and do not leave the
ignition in the ACC or ON/RUN
position. A child could operate
power windows, other controls, or
move the vehicle. AUTOMATIC
TRANSMISSION
The shift lever must be in the PARK or
NEUTRAL position before you can
start the engine. Apply the brakes be-
fore shifting to any driving gear.
NOTE:
The ignition switch must be in the
ON position, and you must press
the brake pedal before shifting out
of PARK.
NORMAL STARTING
NOTE:
Normal starting of either a cold or
a warm engine is obtained without
pumping or pressing the accelera-
tor pedal.
Turn the ignition switch to the START
position and release it as soon as the
starter engages. The starter motor will
continue to run, and it will disengage
automatically when the engine is run-
ning. If the engine fails to start, the
starter will disengage automatically in
10 seconds. If this occurs, turn the
ignition switch to the LOCK position,
wait 10 to 15 seconds, then repeat the
“Normal Starting” procedure. IF ENGINE FAILS TO
START
WARNING!
 Never pour fuel or other flam-
mable liquids into the throttle
body air inlet opening in an at-
tempt to start the vehicle. This
could result in a flash fire causing
serious personal injury.
 Do not attempt to push or tow
your vehicle to get it started. Un-
burned fuel could enter the cata-
lytic converter and once the en-
gine has started, ignite and
damage the converter and vehicle.
If the vehicle has a discharged
battery, booster cables may be
used to obtain a start from a
booster battery or the battery in
another vehicle. This type of start
can be dangerous if done improp-
erly. Refer to “Jump Starting” in
“What To Do In Emergencies” for
further information.
134

AIR CONDITIONER
MAINTENANCE
For best possible performance, your
air conditioner should be checked and
serviced by an authorized dealer at
the start of each warm season. This
service should include cleaning of the
condenser fins and a performance
test. Drive belt tension should also be
checked at this time.CAUTION!
Do not use chemical flushes in your
air conditioning system as the
chemicals can damage your air con-
ditioning components. Such damage
is not covered by the New Vehicle
Limited Warranty.
WARNING!
 Use only refrigerants and com-pressor lubricants approved by
the manufacturer for your air con-
ditioning system. Some unap-
proved refrigerants are flammable
and can explode, injuring you.
Other unapproved refrigerants or
lubricants can cause the system to
fail, requiring costly repairs.
 The air conditioning system con-
tains refrigerant under high pres-
sure. To avoid risk of personal in-
jury or damage to the system,
adding refrigerant or any repair
requiring lines to be disconnected
should be done by an experienced
technician.
Refrigerant Recovery And
Recycling
R-134a air conditioning refrigerant is
a hydrofluorocarbon (HFC) that is
endorsed by the Environmental Pro-
tection Agency and is an ozone-saving
product. However, the manufacturer
recommends that air conditioning
service be performed by authorized dealers or other service facilities using
recovery and recycling equipment.
NOTE:
Use only manufacturer approved
A/C System Sealers, Stop Leak
Products, Seal Conditioners, Com-
pressor Oil, and Refrigerants.
A/C AIR FILTER
Refer to the “Maintenance Schedule”
for the proper maintenance intervals.
CAUTION!
Car maintenance should be done at
a LANCIA Dealership. For routine
and minor maintenance operations
you wish to carry out yourself, we do
recommend you have the proper
equipment, genuine LANCIA spare
parts and the necessary fluids; do
not however carry out these opera-
tions if you have no experience.WARNING!
Do not remove the A/C Air Filter
while the blower is operating or per-
sonal injury may result.
186

When cleaning the rear view mirror,
spray cleaner on the towel or rag that
you are using. Do not spray cleaner
directly on the mirror.
Cleaning Plastic Instrument
Cluster Lenses
The lenses in front of the instruments
in this vehicle are molded in clear
plastic. When cleaning the lenses,
care must be taken to avoid scratch-
ing the plastic.
1. Clean with a wet, soft rag. A mild
soap solution may be used, but do not
use high alcohol content or abrasive
cleaners. If soap is used, wipe clean
with a clean damp rag.
2. Dry with a soft cloth.
Seat Belt Maintenance
Do not bleach, dye, or clean the belts
with chemical solvents or abrasive
cleaners. This will weaken the fabric.
Sun damage can also weaken the fab-
ric.
If the belts need cleaning, use a mild
soap solution or lukewarm water. Do
not remove the belts from the car to
wash them. Dry with a soft cloth.Replace the belts if they appear frayed
or worn or if the buckles do not work
properly.
CLEANING CENTER
CONSOLE CUPHOLDERS
Removal
Grab the rubber portion of the cup-
holder and lift upward.
Cleaning
Soak the rubber cupholder liner in a
mixture of medium hot tap water and
one teaspoon of mild liquid dish soap.
Let soak for approximately one hour.
After one hour pull the liner from the
water and dip it back into the water
about six times. This will loosen any
remaining debris. Rinse the liner thor-
oughly under warm running water.
Shake the excess water from the liner
and dry the outer surfaces with a
clean soft cloth.
Installation
Align the liner in the cupholder and
press down firmly.
CONVERTIBLE TOP CARE
CAUTION!
Failure to follow these cautions may
cause interior water damage, stains
or mildew on the top material:
 Avoid high-pressure car washes,
as they can damage the top mate-
rial. Also, increased water pres-
sure may force past the weather
strips.
 Remove any standing water from
the top and dry the surface before
opening it. Operating the top,
opening a door or lowering a win-
dow while the top is wet may al-
low water to drip into the vehicles
interior.
 Use care when washing the ve-
hicle, water pressure directed at
the weather strip seals may cause
water to leak into the vehicles in-
terior.
198

Thousands Of Kilometers24 48 72 96 120 144 168 192
Months 12 24 36 48 60 72 84 96
Check operation of lighting system (headlamps, direction
indicators, hazard warning lights, luggage compartment,
passenger compartment, glove compartment, instrument
panel warning lights, etc.).        
Check operation of windshield washer system and adjust
jets if necessary.        
Check windshield/rear window wiper blade position/
wear.        
Check cleanliness of hood and tailgate locks and cleanli-
ness and lubrication of linkages.        
Visually inspect condition of: exterior bodywork, under-
body protection, pipes and hoses (exhaust - fuel system -
brakes), rubber elements (boots, sleeves, bushes, etc.).        
Check conditions and wear of front disc brake pads.        
Check conditions and wear of rear disc brake pads.        
Check and, if necessary, top up fluid levels (brakes, wind-
shield washer, battery, engine coolant, etc.).        
Visually inspect the condition of accessory drive belt/s. 
Check the handbrake lever stroke and adjust it, if neces-
sary. 

Check exhaust gas emissions.        
Check engine management system operation (via diag-
nostic socket).        
Change the automatic transmission fluid and filter. 
Replace spark plugs. 
213

Thousands Of Kilometers24 48 72 96 120 144 168 192
Months 12 24 36 48 60 72 84 96
Replace air filter cartridge.    
Change engine oil and replace oil filter.*
Change brake fluid (or every 24 months).  
Replace pollen filter.        
* The engine oil and the oil filter must
be changed when the instrument
panel warning light comes on or in
any case every 12 months.
Periodic Checks
Every 1 000 km or before long jour-
neys, check and, if necessary, restore:
 engine coolant;
 brake fluid;
 windshield washer fluid level;
 tire inflation pressure and condi- tion;
 operation of lighting system (head- lights, direction indicators, hazard
warning lights, etc.);
 operation of windshield washer/ wiper system and positioning/wear
of windshield/rear window wiper
blades. Every
3 000 km, check and top up, if
required, the engine oil level.
Heavy-Duty Use Of The Car
If the car is used mainly under one of
the following conditions:
 towing a trailer or caravan;
 dusty roads;
 short, repeated journeys (less than 7-8 km) at sub-zero outside tem-
peratures;
 engine often idling or driving long distances at low speeds or long pe-
riods of idleness.
You should perform the following in-
spections more frequently than shown
on the Scheduled Servicing Plan:
 check front disc brake pad condi- tions and wear;  check cleanliness of hood and trunk
locks, cleanliness and lubrication of
linkage;
 visually inspect conditions of: en- gine, transmission, pipes and hoses
(exhaust - fuel system - brakes) and
rubber elements (boots - sleeves -
bushes - etc.);
 check battery charge and battery fluid level (electrolyte);
 visually inspect condition of the ac- cessory drive belts;
 check and, if necessary, change en- gine oil and replace oil filter;
 check and, if necessary, replace pol- len filter;
 check and, if necessary, replace air cleaner.
214

About Your Brakes . . . . . . . . . 145
ABS
(Anti-Lock Brake System) . . . 146
Adding Engine Coolant
(Antifreeze) . . . . . . . . . . . . . . 191
Adding Washer Fluid . . . . . . . 188
Additives, Fuel . . . . . . . . . . . 160
Air Cleaner, Engine
(Engine Air Cleaner Filter) . . . 184
Air Conditioner
Maintenance . . . . . . . . . . . . . 186
Air Conditioning Filter . . . 128,186
Air Conditioning Refrigerant . . 186
Air Conditioning
System . . . . . . . . . . . . . . 124,186
Air Conditioning, Operating
Tips . . . . . . . . . . . . . . . . . . . 129
Air Pressure, Tires . . . . . . . . . 151
Airbag . . . . . . . . . . . . . . . . . . 30
Airbag Deployment . . . . . . . . . 34
Airbag Light . . . . 32,33,36,46,108
Airbag Maintenance . . . . . . . . . 35
Airbag, Side . . . . . . . . . . 31,32,33
Airbag, Window
(Side Curtain) . . . . . . . . . . . . . 32
Alarm (Security Alarm) . . . . . . 14
Alarm System
(Security Alarm) . . . . . . . . 14,112Alterations/Modifications,
Vehicle . . . . . . . . . . . . . . . . . . . 7
Anti-Lock Brake System
(ABS) . . . . . . . . . . . . . . . . . . 146
Anti-Lock Warning Light . . . . 146
Anti-Theft Security Alarm
(Theft Alarm) . . . . . . . . . . . . . 14
Antifreeze
(Engine Coolant) . . . . . . . 191,206
Disposal . . . . . . . . . . . . . . 192
Appearance Care . . . . . . . . . . 196
Ashtray . . . . . . . . . . . . . . . . . 100
Auto Down Power Windows . . . 19
Auto Unlock, Doors . . . . . . . . . 18
Automatic Door Locks . . . . . . . 18
Automatic Headlights . . . . . . . 91
Automatic Oil Change
Indicator . . . . . . . . . . . . 110,117
Automatic Temperature
Control (ATC) . . . . . . . . . . . . 124
Automatic Transaxle . . . . . 12,134 Adding Fluid . . . . . . . . . . . 207
Selection Of Lubricant . . . . 207
Automatic Transmission . . 135,194 Adding Fluid . . . . . . . . . . . 195
Fluid and Filter Changes . . . 195
Fluid Level Check . . . . . . . 195
Fluid Type . . . . . . . . . . . . . 195
Gear Ranges . . . . . . . . . . . 137 Special Additives . . . . . . . . 195
Autostick . . . . . . . . . . . . . . . 141
Battery . . . . . . . . . . . . . . . . . 185
Keyless Transmitter
Replacement (RKE) . . . . . . . 17
Location . . . . . . . . . . . . . . 185
Belts, Seat . . . . . . . . . . . . . 23,45
Body Mechanism
Lubrication . . . . . . . . . . . . . . 187
Brake Assist System . . . . . . . . 148
Brake Fluid . . . . . . . . . . . . . . 207
Brake System . . . . . . . . . . . . 193 Anti-Lock (ABS) . . . . . . . . 146
Fluid Check . . . . . . . . 194,207
Master Cylinder . . . . . . . . . 194
Parking . . . . . . . . . . . . . . . 145
Warning Light . . . . . . . . . . 108
Brake, Parking . . . . . . . . . . . 145
Brake/Transmission
Interlock . . . . . . . . . . . . . . . . 136
Brakes . . . . . . . . . . . . . . . . . 193
Break-In Recommendations,
New Vehicle . . . . . . . . . . . . . . 44
Bulb Replacement . . . . . . . . . 203
Bulbs, Light . . . . . . . . . . . 47,203
Calibration, Compass . . . . . . . 118
216