2012 KIA PICANTO air condition

[x] Cancel search: air condition

Page 705 of 840

KIA PICANTO 2012  Owners Manual Driving your vehicle
38
5
 Remember, your vehicle does not
require extended warm-up. After the 
engine has started, allow the engine to
run for 10 to 20 seconds prior to plac-
ing the vehicle in gear.

Page 719 of 840

KIA PICANTO 2012  Owners Manual Driving your vehicle
52
5
When you are ready to leave after park- 
ing on a hill  
1. With the manual transaxle in Neutral
or automatic transaxle in P (Park), 
apply your brakes and hold the brake
ped

Page 729 of 840

KIA PICANTO 2012  Owners Manual 67
What to do in an emergency
IF THE ENGINE OVERHEATS
If your temperature gauge indicates over- 
heating, you experience a loss of power,
or hear loud pinging or knocking, the
engine is probably too h

Page 736 of 840

KIA PICANTO 2012  Owners Manual What to do in an emergency
14
6
Important - use of compact spare
tyre (if equipped)
Your vehicle is equipped with a com- 
pact spare tyre. This compact spare
tyre takes up less space than a reg-
ular-

Page 752 of 840

KIA PICANTO 2012  Owners Manual 75
Maintenance
While operating your vehicle:
 Note any changes in the sound of theexhaust or any smell of exhaust fumes 
in the vehicle.
 Check for vibrations in the steering wheel. Notice any increas

Page 754 of 840

KIA PICANTO 2012  Owners Manual 77
Maintenance
NORMAL MAINTENANCE SCHEDULE 
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all 
vehicle emission services to pr

Page 755 of 840

KIA PICANTO 2012  Owners Manual Maintenance
8
7
NORMAL MAINTENANCE SCHEDULE (CONT.)
(Continued)
❑  Replace engine oil and filter - For Middle East, Brazil * 2 
(Every 10,000 km (6,500 miles) or 12months* 3
)
❑  Add fuel additive

Page 756 of 840

KIA PICANTO 2012  Owners Manual 79
Maintenance
30,000 km (20,000 miles) or 24months
❑ Inspect air cleaner filter - Except China, India, Middle East
❑  Inspect air conditioner refrigerant/compressor (if equipped)
❑ Inspect batt