2012 JEEP LIBERTY wheel

[x] Cancel search: wheel

Page 445 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual WARNING!
A loose tire or jack, thrown forward in a collision or
hard stop, could endanger the occupants of the ve-
hicle. Always stow the jack parts and the spare tire in
the places provided.
12. Remo

Page 450 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual FREEING A STUCK VEHICLE
If your vehicle becomes stuck in mud, sand or snow, it
can often be moved by a rocking motion. Turn your
steering wheel right and left to clear the area around the
front wheels

Page 451 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual WARNING!
Fast spinning tires can be dangerous. Forces gener-
ated by excessive wheel speeds may cause damage, or
even failure, of the axle and tires. A tire could
explode and injure someone. Do not sp

Page 453 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual Towing Condition Wheels OFFthe Ground 2WD Models
4WD Models
Flat Tow NONEIf transmission is operable:
•Transmission in
NEUTRAL
•30 mphmax speed(48 km/h)
•15 miles (24 km) maxdistance See instruc

Page 454 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual If the vehicle’s battery is discharged, refer to “Shift Lever
Override” in “What To Do In Emergencies” for instruc-
tions on shifting the automatic transmission out of the
PARK position for

Page 455 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual CAUTION!
Towing faster than 30 mph (48 km/h) or farther than
15 miles (24 km) with rear wheels on the ground can
cause severe damage to the transmission. Such dam-
age is not covered by the New Vehicl

Page 456 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual Four-Wheel Drive Models
The manufacturer recommends towing with all wheels
OFFthe ground. Acceptable methods are to tow the
vehicle on a flatbed or with one end of vehicle raised and
the opposite end

Page 490 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual CAUTION!
•Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder, which will
scratch metal and painted surfaces.
•Use of power washers exceeding 1,200 psi
(8 274 kP