2012 JEEP GRAND CHEROKEE tires

[x] Cancel search: tires

Page 427 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual These indicators are molded into the bottom of the tread
grooves. They will appear as bands when the tread depth
becomes 1/16 in (2 mm). When the tread is worn to the
tread wear indicators, the tire s

Page 428 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual Replacement Tires
The tires on your new vehicle provide a balance of many
characteristics. They should be inspected regularly for
wear and correct cold tire inflation pressure. The manu-
facturer stro

Page 429 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual WARNING!
•Do not use a tire, wheel size or rating other than
that specified for your vehicle. Some combinations
of unapproved tires and wheels may change sus-
pension dimensions and performance char

Page 430 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual aggressive tread designs such as those on On/Off-Road
type tires. Rotation will increase tread life, help to main-
tain mud, snow, and wet traction levels, and contribute to
a smooth, quiet ride.
Refe

Page 431 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual the outside temperature decreases, the tire pressure will
decrease. Tire pressure should always be set based on
cold inflation tire pressure. This is defined as the tire
pressure after the vehicle has

Page 432 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual be ON. In this situation, the Tire Pressure Monitoring
Telltale Light will turn OFF only after the tires have been
inflated to the vehicle’s recommended cold tire pressure
value.
CAUTION!
•The TPM

Page 433 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual •The TPMS is not a substitute for proper tire mainte-
nance, and it is the driver ’s responsibility to maintain
correct tire pressure using an accurate tire gauge, even
if under-inflation has not

Page 435 of 572

JEEP GRAND CHEROKEE 2012 WK2 / 4.G SRT Owners Manual NOTE:Your system can be set to display pressure units
in PSI, kPa, or BAR.
If the ignition switch is cycled, this sequence will repeat,
providing the system fault still exists. If the system fault
no
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >