2012 JEEP COMPASS ignition

[x] Cancel search: ignition

Page 327 of 497

JEEP COMPASS 2012 1.G Owners Manual NOTE:The “ESC OFF” message will display and an
audible chime will sound when the shift lever is placed
into the PARK position from any other position, and then
moved out of the PARK position. This

Page 328 of 497

JEEP COMPASS 2012 1.G Owners Manual Malfunction Indicator Light” begins to flash during ac-
celeration, ease up on the accelerator and apply as little
throttle as possible. Be sure to adapt your speed and
driving to the prevailing roa

Page 353 of 497

JEEP COMPASS 2012 1.G Owners Manual •Four Tire Pressure Monitoring Sensors
•Tire Pressure Monitoring Telltale Light
Tire Pressure Monitoring Low Pressure Warnings
The Tire Pressure Monitoring Telltale Light will illumi-
nate in the

Page 354 of 497

JEEP COMPASS 2012 1.G Owners Manual NOTE:Your vehicle is equipped with a compact spare
wheel and tire assembly.
1. The compact spare tire does not have a tire pressure
monitoring sensor. Therefore, the TPMS will not monitor
the tire pre

Page 355 of 497

JEEP COMPASS 2012 1.G Owners Manual The TPMS consists of the following components:
•Receiver Module
•Four Tire Pressure Monitoring Sensors
•Three Trigger Modules (mounted in three of the four
wheel wells)
•Various Tire Pressure

Page 356 of 497

JEEP COMPASS 2012 1.G Owners Manual display to the vehicle’s recommended cold placard pres-
sure value. The system will automatically update, the
“LOW TIRE” text message will no longer be displayed,
the graphic display of the pres

Page 357 of 497

JEEP COMPASS 2012 1.G Owners Manual will be displayed instead of dashes. A system fault can
occur with any of the following scenarios:
1. Jamming due to electronic devices or driving next to
facilities emitting the same radio frequencie

Page 358 of 497

JEEP COMPASS 2012 1.G Owners Manual 3. However, after driving the vehicle for up to 20 min-
utes above 15 mph (24 km/h), the Tire Pressure Moni-
toring Telltale Light will flash on and off for 75 seconds
and then remain on solid. In add