2012 JAGUAR XK power steering

JAGUAR XK JAGUAR XK JAGUAR XK
JAGUAR XK JAGUAR XK JAGUAR XK
Seat adjustment Seat adjustmentDriving position memoryDriving position memory
Convertible topConvertible top
Door mirrors adjustment Door mirrors adjustment
Steering column adjustments Steering column adjustments See page 7, item See page 7, item 18
Comfort adjustments
4
Operating note
The controls for seat heating and cooling are accessed via the touch screen.
123
45
Note: Seat adjustment may vary dependent upon vehicle Note: Seat adjustment may vary dependent upon vehicle Note:specification.
The control panel is on the door.
Cushion length.1.
Lumbar support.2.
Seat back angle.3.
Side bolster adjustment.4.
Seat forwards and back, cushion height and cushion 5. angle.
Electronic steering column lock
The lock will disengage automatically when the correct Jaguar Smart Key is inside the vehicle.
Steering wheel adjustment
Turn the control to • COLUMN then move the control to adjust the height and reach.
Exit mode
With the control set to • AUTO, the steering column will move to provide greater clearance for exiting when the driver’s door is opened.
Entry mode
After the driver’s door is closed and the START/STOP button is pressed the column will return to its previous position.
2
1
1Door mirror adjustment
Press to select a mirror. 1.
Use to adjust the mirror position.2.
Powerfold mirrors
• Press both buttons 1 simultaneously to fold the mirrors inward. Press again to unfold.
The mirrors can be programmed to unfold/fold automatically at vehicle unlock/lock. See your Owner’s Handbook.
Mirror dip when reversing
Reverse dip can be enabled or disabled via the touch screen. From the Home screen, select Vehicle, then Veh.settings, then Parking.
When you have found your ideal driving position, the vehicle can memorise the settings for future use.
Press the 1.M button. The red LED will illuminate for a five second period.
Press button 2.1, 2, or 3 to store your current driving position.
The LED will extinguish and a chime will sound to confirm that the settings have been memorised. If the ignition is on, the message centre will display a confirmation message.
Recalling a seat position
To recall a memorised seat position simply press and hold button 1, 2, or 3 until the seat has finished moving.
Operating note
A seat position will only be memorised during the five second period that the LED is illuminated.
An existing memory setting can be over-written with a new memory position.
Convertible top operation
• DO NOT press the engine START/STOP button while the top is operating. Doing so will cause the system to lose its position memory.
• DO NOT operate the top while the vehicle is in motion. Doing so may damage the top and/or its operating mechanism.
• DO NOT open the luggage compartment while the top is operating. This will cause the operation to stop.
The vehicle must be stationary with the engine running.
Note: The luggage separator MUST be in the correct position before the top will retract.
• To open, press and hold the REAR of switch 1 in the overhead console.
An audible chime indicates start of opening. Rear windows will open, the top unlatches and starts to move. Front windows will fully lower. When the process is complete another audible chime will be given.
• Release the switch.
1
• To close, press and hold the FRONT of switch 1.
Once again an audible chime is given and the windows will lower before the roof moves back into position. When the process is complete another audible chime will be given.
• Release the switch.
5
JJM189630121.indd 4-5JJM189630121.indd 4-5JJM189630121.indd 4-509/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:1909/03/2011 10:10:19

JAGUAR XK JAGUAR XK JAGUAR XK
JAGUAR XK JAGUAR XK JAGUAR XK
Warning lamps Warning lamps Displayed on the instrument panelDisplayed on the instrument panel Electric parking brake Electric parking brake See page 7, item See page 7, item 12
Transmission See page 7, item See page 7, item 9
Starting and drivingStarting and driving
8 9
Apply manually when stationary in Park, Drive or • Reverse by pulling up the parking brake switch.
Can be manually released when the engine is • running and the foot brake is applied. Press the parking brake switch down to release.
If manually applied whilst in Drive or Reverse, the • parking brake will automatically release when the accelerator is applied.
Releases automatically when the gear selector is • moved from Park.
Gearshift interlock
The ignition must be on and the foot brake depressed before the selector can be rotated from the Park position. Maintain brake pressure until a gear is selected.
Instrument pack message centre
The current gear selection will be displayed at the top of the message centre.
Sport mode
To move from Drive to Sport, press the gear selector down and rotate. Automatic gear changing continues but the gearshift points are modified for full use of the engine’s power.
Manual gear changes
The steering wheel paddles allow manual gear changing with either Drive or Sport selected.
• To shift down, briefly pull the left-hand paddle.
• To shift up, briefly pull the right-hand paddle.
When the paddles are used in Drive, gear selection will revert to automatic mode if use of the paddles is not maintained.
With Sport selected, continuous manual operation is initiated if the paddles are used.
DO NOT use the recess in the electric parking brake as a storage area.
If the engine is switched off with Neutral selected, automatic selection of P is delayed for 10 minutes. Do NOT use this feature during vehicle recovery.
P R N D S
STARTENGINESTOP
Auto headlamps and wipers Auto headlamps and wipers See page 7, items See page 7, items 1 and 3and 3and
Auto high beam
1. When AUTO is selected on the lighting control the side lamps and headlamps will turn on automatically when ambient light fades. With the control in the low beam position, high beam will activate automatically when ambient light falls below a pre set level. Vehicle speed must be above 40 km/h (25 mph).
Exit delay
2, 3, 4. The headlamps can be set to temporarily light your way when you exit the car at night. Rotate the control for exit delay periods of 30 seconds, 60 seconds or 120 seconds.
1
432
MA
X
MIN
MAX
MIN
6
5
7
Auto Wipers
Automatic wipers are activated by a rain sensor. When the wiper control is moved up to the first position the wipers will operate automatically as required. Sensitivity can be adjusted.
5. First stop for auto position.
6. Rain sensor maximum sensitivity.
7. Rain sensor minimum sensitivity.
Automatic car wash
Before entering an automatic car wash, turn the wipers off to deactivate the rain sensor. Otherwise, the wipers will operate during the washing process and may be damaged.
Braking system fault or brake fluid low
Braking system fault or brake fluid low. USA only
Dynamic stability control. Flashes when DSC is operating
DSC switched off, Trac DSC on
Automatic speed limiter active
Seat belt reminder
Low tire pressure
Anti-lock braking system fault.
Anti-lock braking system fault. USA only
Engine malfunction
Air bag fault
Rear fog lamp on
Forward alert active
Adaptive cruise control active
In both D and S mode, automatic operation can be reinstated by pulling the right-hand paddle for two seconds.