2012 INFINITI G37 lock

Black plate (31,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SSS0805
To return the seatback: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Fold up the rear seatback.
2. Securely lock the seatback in position.
HEAD RESTRAINTS GUID-8B531645-25BC-4652-833F-432615B358CE
WARNINGHead restraints supplement the other vehi-
cle safety systems. They may provide addi-
tional protection against injury in certain
rear end collisions. Adjust the head re-
straints properly, as specified in this sec-
tion. Check the adjustment after someone
else uses the seat. Do not attach anything to the head restraint stalks or remove the
head restraint. Do not use the seat if the
head restraint has been removed. If the
head restraint was removed, reinstall and
properly adjust the head restraint before an
occupant uses the seating position. Failure
to follow these instructions can reduce the
effectiveness of the head restraints. This
may increase the risk of serious injury or
death in a collision. SSS0989
The illustration shows the seating posi-
tions equipped with head restraints. The
head restraints are adjustable.
Indicates the seating position is
equipped with a head restraint.
Safety — Seats, seat belts and supplemental restraint system
1-9

Black plate (32,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-10 Safety — Seats, seat belts and supplemental restraint system SSS0992
Components GUID-DBDCC61D-24FD-4E47-A348-FDC0C6CDF960
1. Head restraint
2. Adjustment notches
3. Lock knob
4. Stalk SSS0997
Adjustment GUID-8B4E4C06-4D63-4200-A51B-5ED68936E652
Adjust the head restraint so the center is
level with the center of your ears. SSS0993
To raise the head restraint, pull it up.

Black plate (33,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SSS0994
To lower, push and hold the lock knob and
push the head restraint down. SSS0995
Removal GUID-57DF10FD-7FAA-4FB1-8D61-CC400E811A0D
Use the following procedure to remove the
adjustable head restraints.
1. Pull the head restraint up to the highest
position.
2. Push and hold the lock knob.
3. Remove the head restraint from the
seat.
4. Store the head restraint properly in a
secure place so it is not loose in the
vehicle.
5. Reinstall and properly adjust the head
restraint before an occupant uses the seating position.
Safety — Seats, seat belts and supplemental restraint system
1-11

Black plate (34,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-12 Safety — Seats, seat belts and supplemental restraint system SSS0996
Install GUID-A0266381-3929-4791-B5F4-7F6C9A04687C
1. Align the head restraint stalks with the
holes in the seat. Make sure that the
head restraint is facing the correct
direction. The stalk with the adjustment
notches
* 1
must be installed in the
hole with the lock knob
* 2
.
2. Push and hold the lock knob and push
the head restraint down.
3. Properly adjust the head restraint
before an occupant uses the seating
position. SSS0508
Front-seat Active Head Restraints GUID-5D9BA25C-DA31-49D7-B3FB-9413B1B21746
The Active Head Restraint moves forward
utilizing the force that the seatback re-
ceives from the occupant in a rear-end
collision. The movement of the head
restraint helps support the occupant ’ s
head by reducing its backward movement
and helping absorb some of the forces that
may lead to whiplash-type injuries.
Active Head Restraints are effective for
collisions at low to medium speeds in
which it is said that whiplash-type injury
occurs most.
Active Head Restraints operate only in certain rear-end collisions. After the colli-
sion, the head restraints return to their
original positions.
Adjust the Active Head Restraints properly
as described earlier in this section.

Black plate (35,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SSS0678
ARMREST (if so equipped) GUID-A816B76C-44C8-4E8F-8A10-1B4F0B8E76F2
Rear armrest GUID-61E1DB83-21E2-4B96-B569-EF340CDD6AC1
Pull the armrest forward until it is hor-
izontal. SSS0677
Trunk pass-through GUID-799B2734-1032-4868-BF9B-86682A7F09A9
The rear center seatback can be folded to
allow trunk access from inside of the
vehicle.
To access the trunk, pull down the rear
center armrest and pull out the trunk pass-
through lid
* 1
.
To lock the lid, use the mechanical key and
turn it to the LOCK position
* 3
. To unlock,
turn the mechanical key to the UNLOCK
position
* 2
. For the mechanical key usage,
see “ Keys ” (P.3-2).
Make sure that the mechanical key is
removed from the trunk pass-through lid key cylinder before opening or closing the
lid. Otherwise the lid and the rear armrest
may be damaged.
Safety — Seats, seat belts and supplemental restraint system
1-13

Black plate (39,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]seat with both feet on the floor and
adjust the seat belt properly.
. Do not allow children to play with the
seat belts. Most seating positions are
equipped with Automatic Locking Re-
tractor (ALR) mode seat belts. If the seat
belt becomes wrapped around a child ’ s
neck with the ALR mode activated, the
child can be seriously injured or killed if
the seat belt retracts and becomes tight.
This can occur even if the vehicle is
parked. Unbuckle the seat belt to release
the child. If the seat belt can not be
unbuckled or is already unbuckled,
release the child by cutting the seat belt
with a suitable tool (such as a knife or
scissors) to release the seat belt. SSS0292
Fastening the seat belts GUID-B37DD1F9-9FF6-46C4-80B5-F68C6BFB1F41
1. Adjust the seat. (See “ Seats ” (P.1-2).)
2. Slowly pull the seat belt out of the
retractor and insert the tongue into the
buckle until you hear and feel the latch
engage. .
The retractor is designed to lock
during a sudden stop or on impact.
A slow pulling motion permits the
belt to move, and allows you some
freedom of movement in the seat. .
If the seat belt cannot be pulled
from its fully retracted position,
firmly pull the belt and release it. Then smoothly pull the belt out of
the retractor.
Safety — Seats, seat belts and supplemental restraint system
1-17

Black plate (40,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]1-18 Safety — Seats, seat belts and supplemental restraint system SSS0290
3. Position the lap belt portion low and
snug on the hips as shown.
4. Pull the shoulder belt portion toward
the retractor to take up extra slack. Be
sure the shoulder belt is routed over
your shoulder and across your chest.
The three-point type seat belts have two
modes of operation:
. Emergency Locking Retractor (ELR)
. Automatic Locking Retractor (ALR)
The Emergency Locking Retractor (ELR)
mode allows the seat belt to extend and
retract to allow the driver and passengers
some freedom of movement in the seat. The ELR locks the seat belt when the
vehicle slows down rapidly or during
impacts.
The Automatic Locking Retractor (ALR)
mode (child restraint mode) locks the seat
belt for child restraint installation.
When the ALR mode is activated the seat
belt cannot be extended again until the
seat belt tongue is detached from the
buckle and fully retracted. The seat belt
returns to the ELR mode after the seat belt
fully retracts. For additional information,
see “ Child restraints ” (P.1-23).
The ALR mode should be used only for
child restraint installation. During normal
seat belt use by an occupant, the ALR
mode should not be activated. If it is
activated, it may cause uncomfortable seat
belt tension.
WARNING When fastening the seat belts, be certain
that seatbacks are completely secured in
the latched position. If they are not com-
pletely secured, passengers may be injured
in an accident or sudden stop. SSS0326
Unfastening the seat belts GUID-E5ABF433-63F1-41B4-9060-772462985B76
To unfasten the seat belt, push the button
on the buckle. The seat belt automatically
retracts.
Checking seat belt operation GUID-B2C3D22B-2FD8-46E0-9AC6-84735F785EB4
Seat belt retractors are designed to lock
seat belt movement by two separate
methods:
. When the belt is pulled quickly from the
retractor.
. When the vehicle slows down rapidly.
To increase your confidence in the seat
belts, check the operation as follows:

Black plate (41,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. Grasp the shoulder belt and pull
forward quickly. The retractor should
lock and restrict further belt movement.
If the retractor does not lock during this
check or if you have any question about
seat belt operation, see an INFINITI retailer.
SSS0687
Center of rear seat (Sedan) GUID-F8C852B7-8F2B-4F66-B9F1-740AF287A7F1
Selecting correct set of seat belts: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The center seat belt buckle is identified by
the CENTER mark
* A
. The center seat belt
tongue can be fastened only into the center
seat belt buckle. SSS0294A
Shoulder belt height adjustment
(for Sedan front seats) GUID-9DA0069A-F53D-4536-89F5-3F6983A3F7DF
The shoulder belt anchor height should be
adjusted to the position best for you. (See
“ Precautions on seat belt usage ” (P.1-14).)
To adjust, push the button
* A
, and then
move the shoulder belt anchor to the
desired position, so that the belt passes
over the center of the shoulder. The belt
should be away from your face and neck,
but not falling off of your shoulder. Release
the adjustment button to lock the shoulder
belt anchor into position.
Safety — Seats, seat belts and supplemental restraint system
1-19