2012 INFINITI G garage door opener

Black plate (137,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]
GUID-3B0103FD-8C82-48ED-ABBE-0FF7FE9A8F16The light illuminates when the trunk lid is
opened. When the trunk lid is closed, the
light will turn off.
The light will also turn off after 15 minutes
when the light remains illuminated after
the ignition switch has been pushed to the
OFF or LOCK position to prevent the
battery from becoming discharged.GUID-0BF67760-C562-4D9A-8217-C1A104712017HomeLink®Universal Transceiver provides
a convenient way to consolidate the func-
tions of up to three individual hand-held
transmitters into one built-in device.
HomeLink
®Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
. Is powered by your vehicle’s battery. No
separate batteries are required. If the
vehicle’s battery is discharged or is
disconnected, HomeLink
®will retain all
programming.
Once HomeLink
®Universal Transceiver is
programmed, retain the original transmit-
ter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink
®Universal Transceiver buttons
should be erased for security purposes.
For additional information, see “Program-
ming HomeLink
®” (P.2-60).
WARNING
. Do not use HomeLink®Universal Trans-
ceiver with any garage door opener that
lacks safety stop and reverse features as required by federal safety standards.
(These standards became effective for
opener models manufactured after April
1, 1982.) A garage door opener which
cannot detect an object in the path of a
closing garage door and then automati-
cally stop and reverse, does not meet
current federal safety standards. Using a
garage door opener without these fea-
tures increases the risk of serious injury
or death.
. During programming procedure, your
garage door or security gate may open
or close. Make sure that people and
objects are clear of the garage door,
gate, etc. that you are programming.
. Your vehicle’s engine should be turned
off while programming HomeLink
®Uni-
versal Transceiver.
Instruments and controls2-59
TRUNK LIGHT HomeLink®UNIVERSAL TRANSCEIVER (if so
equipped)

Black plate (138,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]
2-60Instruments and controls
PROGRAMMING HomeLink®GUID-C1A6C78C-5674-4502-BB48-800218FBC19ETo program your HomeLink®Transceiver to
operate a garage door, gate, or entry door
opener, home or office lighting, you need
to be at the same location as the device.
Note: Garage door openers (manufactured
after 1996) have “rolling code protection”.
To program a garage door opener equipped
with “rolling code protection”; you will
need to use a ladder to get up to the
garage door opener motor to be able to
access the “smart or learn” program
button.
SIC3612
1. To begin, push and hold the 2 outer HomeLink®buttons (to clear the mem-
ory) until the indicator light
*Ablinks
(after 20 seconds). Release both but-
tons.
2. Position the end of the hand-held
transmitter 1-3 inches away from the
HomeLink
®surface.
SIC3613
3. Using both hands, simultaneously push
and hold both the HomeLink®button
you want to program and the hand-held
transmitter button.
DO NOT release the buttons until step 4
has been completed.
4. Hold down both buttons until the
indicator light on HomeLink
®flashes,
changing from a “slow blink”to a
“rapid blink”. This could take up to 90
seconds. When the indicator light
blinks rapidly, both buttons may be
released. The rapidly flashing light
indicates successful programming. To
activate the garage door or other

Black plate (139,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]
programmed device, push and hold the
programmed HomeLink®button - re-
leasing when the device begins to
activate.
5. If the indicator light on HomeLink
®
blinks rapidly for two seconds and then
turns solid, HomeLink®has picked up a
“rolling code” garage door opener
signal. You will need to proceed with
the next steps to train HomeLink
®,
completing the programming may re-
quire a ladder and another person for
convenience.
6. Push and release the program button located on the garage door opener’s
motor to activate the “training mode”.
This button is usually located near the
antenna wire that hangs down from the
motor. If the wire originates from under
a light lens, you will need to remove the
lens to access the training button.
NOTE:
Once you have pushed and released
the training button on the garage door
opener’s motor and the “training light”
is lit, you have 30 seconds in which to
perform step 7. For convenience, use
the help of a second person to assist
when performing this step. 7. Quickly (within 30 seconds of pushing
and releasing the garage door opener
training button) and firmly push and
release the HomeLink
®button you’ve
just programmed. Push and release the
HomeLink
®button up to three times to
complete the training.
8. Your HomeLink
®button should now be
programmed. To program the remaining
HomeLink
®buttons for additional door
or gate openers, follow steps 2 through
8 only.
NOTE:
Do not repeat step 1 unless you want to
“clear” all previously programmed
HomeLink
®buttons.
If you have any questions or are having
difficulty programming your HomeLink
®
buttons, please refer to the HomeLink®
web site at: www.homelink.com or call 1-
800-355-3515.
PROGRAMMING HomeLink®FOR
CANADIAN CUSTOMERS
GUID-FA6ED7D7-5805-4878-A033-2D4A6CF0EB88Prior to 1992, D.O.C. regulations required
hand-held transmitters to stop transmitting
after 2 seconds. To program your hand-
held transmitter to HomeLink
®, continue to
push and hold the HomeLink®button (note
steps 2 through 4 under “Programming
HomeLink
®”) while you push and re-push
(“cycle”) your hand-held transmitter every
2 seconds until the indicator light flashes
rapidly (indicating successful program-
ming).
NOTE:
If programming a garage door opener, etc.,
it is advised to unplug the device during
the “cycling” process to prevent possible
damage to the garage door opener com-
ponents.
OPERATING THE HomeLink®UNI-
VERSAL TRANSCEIVER
GUID-6973D290-7F33-4E52-A191-FAE191D2E93AHomeLink®Universal Transceiver (once
programmed) may now be used to activate
the garage door, etc. To operate, simply
push the appropriate programmed
HomeLink
®Universal Transceiver button.
The red indicator light will illuminate while
the signal is being transmitted.
Instruments and controls2-61

Black plate (481,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]
Engine start operation indicator (Manual
Transmission models)...
.................................. 2-23
If your vehicle overheats ...
.............................. 6-10
Starting the engine ...
...................................... 5-13
Entry/exit function ...
............................................ 3-31
Event Data Recorders (EDR) ...
............................... 9-27
Exhaust gas (carbon monoxide) ...
.......................... 5-3
F
F.M.V.S.S./C.M.V.S.S. certification label ...
............. 9-13
Filter Air cleaner housing filter ...
.............................. 8-21
Changing engine oil and filter ...
...................... 8-11
Flashers (See hazard warning flasher switch) ...
.... 2-39
Flat tire ...
............................................................... 6-2
Flat towing ...
........................................................ 9-23
Floor mat cleaning ...
.............................................. 7-5
Fluid
Automatic transmission fluid (ATF) ...
............... 8-14
Brake and clutch fluid ...
.................................. 8-15
Brake fluid ...
................................................... 8-15
Capacities and
recommended fuel/lubricants ...
........................ 9-2
Engine coolant ...
............................................... 8-9
Engine oil ...
.................................................... 8-11
Power steering fluid ...
..................................... 8-14
Window washer fluid ...
................................... 8-16
FM-AM-SAT radio with Compact Disc
(CD) player ...
........................................................ 4-57
Fog light switch ...
................................................ 2-39
Front passenger air bag and status light ...
........... 1-49 Front power seat adjustment
...
............................... 1-3
Front seat, Front seat adjustment ...
........................ 1-3
Front-seat active head restraints ...
....................... 1-12
Fuel
Capacities and
recommended fuel/lubricants ...
........................ 9-2
Fuel economy ...
............................................... 5-45
Fuel economy information (display) ...
.............. 4-11
Fuel octane rating ...
.......................................... 9-4
Fuel recommendation ...
..................................... 9-4
Fuel-filler cap ...
............................................... 3-23
Fuel-filler door ...
............................................. 3-23
Gauge ...
............................................................ 2-9
LOOSE FUEL CAP warning ...
............................. 3-25
Fuses ...
................................................................ 8-24
Fusible links ...
..................................................... 8-24
G
Garage door opener, HomeLink®
Universal Transceiver ...
........................................ 2-59
Gas cap ...
............................................................ 3-23
Gauge ...
................................................................. 2-6
Engine coolant temperature gauge ...
................. 2-8
Fuel gauge ...
..................................................... 2-9
Odometer ...
....................................................... 2-7
Speedometer ...
................................................. 2-7
Tachometer ...
.................................................... 2-8
Trip computer ...
.............................................. 2-26
General maintenance ...
................................... 8-3, 8-4
Glove box ...
......................................................... 2-47
Golf bag stowing ...
.............................................. 2-51
H
Hands-free phone system, Bluetooth®
(models with navigation system) ...
....................... 4-90
Hands-free phone system, Bluetooth®
(models without navigation system) ...
................ 4-100
Hazard warning flasher switch ...
.......................... 2-39
Head restraints ...
................................................... 1-9
Headlights
Bulb replacement ...
......................................... 8-30
Headlight switch ...
.......................................... 2-35
Xenon headlights ...
......................................... 2-34
Heated seats ...
.................................................... 2-40
Heater, Automatic climate control ...
..................... 4-31
HomeLink
®Universal Transceiver ...
...................... 2-59
Hood release ...
.................................................... 3-18
Hook, Coat hooks ...
............................................. 2-50
Horn ...
................................................................. 2-40
I
Ignition switch
(Push-button) ...
................................................. 5-9
Manual transmission models ...
....................... 5-18
Immobilizer system ...
........................................... 2-30
In-cabin microfilter ...
............................................ 4-40
Indicator
Dot matrix display ...
....................................... 2-20
Lights ...
.......................................................... 2-18
INFINITI Vehicle Immobilizer System ...
.................. 2-30
INFINITI voice recognition system ...
.................... 4-114
10-3