2012 INFINITI G-COUPE belt

[x] Cancel search: belt

Page 427 of 490

INFINITI G-COUPE 2012  Owners Manual 8-20Maintenance and do-it-yourself
ess. If the belt is in poor condition or
loose, have it replaced or adjusted by
an INFINITI retailer.
2. Have the belts checked regularly for condition and tension i

Page 449 of 490

INFINITI G-COUPE 2012  Owners Manual 8-42Maintenance and do-it-yourself
.The original tires have built-in
tread wear indicators. When wear
indicators are visible, the tire(s)
should be replaced.
. Tires degrade with age and use.
Have tir

Page 450 of 490

INFINITI G-COUPE 2012  Owners Manual All-Wheel Drive (AWD) models
CAUTION
.Always use tires of the same type, size,
brand, construction (bias, bias-belted or
radial), and tread pattern on all four
wheels. Failure to do so may result in a

Page 471 of 490

INFINITI G-COUPE 2012  Owners Manual 9-20Technical and consumer information
9. Insert a flat-blade screwdriver into thegrommet hole to add a 908 turn onto
the part
*C.
10. Install the license plate bracket with the bolts.
11. Install the

Page 478 of 490

INFINITI G-COUPE 2012  Owners Manual A vehicle equipped with All-Wheel Drive
(AWD) should never be tested using a two
wheel dynamometer (such as the dynam-
ometers used by some states for emissions
testing), or similar equipment. Make su

Page 480 of 490

INFINITI G-COUPE 2012  Owners Manual 10 Index
Number
4 Wheel Active Steer (4WAS) system ................. 5-57
4 Wheel Active Steer (4WAS) warning light ....... 2-14
A
ABS (Anti-lock Braking System) ......................... 5-54
Advance

Page 481 of 490

INFINITI G-COUPE 2012  Owners Manual 10-2
C
Cabin air filter ................................................... 4-40
Capacities and recommended fuel/lubricants ...... 9-2
Car phone or CB radio ...................................... 4-89

Page 483 of 490

INFINITI G-COUPE 2012  Owners Manual 10-4
INFO button ........................................................ 4-9
Inside mirror ..................................................... 3-28
Inspection/maintenance (I/M) test ...............