Page 180 of 506
Maintenance informationGUID-B0CE4DD0-ABB6-4371-8E37-69C394B69C0B
SAA3003
Example
The Reminder will be automatically dis-
played when the specified distance has
been driven and every time the ignition
switch is pushed to the ACC or ON position.
The reminder will not appear while driving.
Select the “OK”key to hide the reminder
for the rest of the current drive.
To stop the reminder from appearing,
perform one of the following actions:
. Select the “Reset Distance”.
. Deactivate the “Reminder”.
. Increase the “Interval”distance to be
more than the current distance being
tracked.
Monitor, climate, audio, phone and voice recognition systems4-13
Page 181 of 506
4-14Monitor, climate, audio, phone and voice recognition systems
SAA2483
Others information (models with
navigation system)
GUID-9EB8F3F0-6FA2-4D77-80B2-7757E207A583
SAA2484
With navigation system
SAA2604
Without navigation system
HOW TO USE SETTING BUTTONGUID-040D1EFC-1D7E-41AF-BAD0-28FB0E97C46F
Page 182 of 506
SAA2485
With navigation system
SAA2740
Without navigation system
Audio settingsGUID-57225899-0F38-4259-B7F8-B113BC842F48
Page 183 of 506
4-16Monitor, climate, audio, phone and voice recognition systems
Phone settings (models with navi-
gation system)
GUID-88871DFB-9AEB-4F6F-843E-66985C858DDE
SAA2554
Volume and Beeps settings (models
with navigation system)
GUID-3FAD6F27-3261-4322-A2F9-B8F8B8C1924C
Page 185 of 506

4-18Monitor, climate, audio, phone and voice recognition systems
SAA2486
Display settings (models with na-
vigation system)
GUID-E0491625-9286-4F10-923A-DCDB5264DF3F
OFF”button for more than 2 seconds. When any mode button is pushed with the
screen off, the screen turns on for further
operation. The screen will turn off auto-
matically 5 seconds after the operation is
finished.
To turn on the screen, set this item to the
ON position, or push and hold the
“
OFF”button.
. Brightness/Contrast/Background Color
To adjust the brightness and contrast of
the screen, select the “Brightness”or
“Contrast” key.
Then, you can adjust the brightness to
“Darker” or“Brighter”, and the contrast to
“Lower” or“Higher” using the INFINITI
controller.
For information on the “Background Color”
key, refer to the separate Navigation
System Owner’s Manual.
Color Theme:
GUID-4D508F5D-FA8E-49D6-A9E2-6F8E76C17033
SAA2115
DISPLAY settings (models without
navigation system)
GUID-FC44B850-A96B-4E0A-8FD0-68CE0ECA4774
Page 187 of 506
4-20Monitor, climate, audio, phone and voice recognition systems
CAMERA settings (if equipped)GUID-57A8A941-36A5-4988-AF48-0340D295F625
SAA2489
Others settings (models with navi-
gation system)
GUID-A59A2632-509D-4BAF-BCCB-61BE5A0FB60D
SAA2488
With navigation system
SAA3150
Without navigation system
Page 189 of 506
4-22Monitor, climate, audio, phone and voice recognition systems
SAA2490
Language & Units settingsGUID-EB399EBE-AB93-480C-A2F4-B5FADEB4AA46
SAA2491
Image Viewer (models with naviga-
tion system)
GUID-638099F4-6351-46FB-82A7-57169F1C6E32
Page 191 of 506

4-24Monitor, climate, audio, phone and voice recognition systems
WARNING
.The rearview monitor is a convenience
but it is not a substitute for proper
vehicle operation because it has areas
where objects cannot be viewed. Always
look out the windows and check mirrors
to be sure that it is safe to move before
operating the vehicle. Always operate
the vehicle slowly.
. Objects viewed in the RearView Monitor
differ from actual distance because a
wide-angle lens is used. Objects in the
RearView Monitor will appear visually
opposite like ones viewed in the inside
and outside mirrors.
. Make sure that the lift gate is securely
closed when backing up. .
Underneath the bumper and the corner
areas of the bumper cannot be viewed on
the rearview monitor because of its
monitoring range limitation.
. Do not put anything on the rearview
camera. The rearview camera is installed
above the license plate.
. When washing the vehicle with high-
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing water
condensation on the lens, a malfunction,
fire or an electric shock.
. Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunc-
tion or cause damage resulting in a fire
or an electric shock.
CAUTION
There is a plastic cover over the camera. Do
not scratch the cover when cleaning dirt or
snow from the cover.
REARVIEW MONITOR (if so equipped)