2012 HYUNDAI VERACRUZ cooling

[x] Cancel search: cooling

Page 190 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Features of your vehicle
106
4
D250000AEN For maximum defrosting, set the tem-
perature control to the extreme
right/hot position and the fan speed
control to the highest speed.
 If warm air to the fl

Page 304 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Driving your vehicle
44
5
E120200AUN
Use high quality ethylene glycol
coolant
Your vehicle is delivered with high quality
ethylene glycol coolant in the cooling
system. It is the only type of coolant

Page 310 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Driving your vehicle
50
5
7. Shut off the vehicle and release the
vehicle brakes but leave the parking
brake set.
When you are ready to leave after park-
ing on a hill 
1. With the automatic transaxle

Page 324 of 429

HYUNDAI VERACRUZ 2012  Owners Manual What to do in an emergency
66
IF THE ENGINE OVERHEATS
F050000AEN
If your temperature gauge indicates over-
heating, you experience a loss of power,
or hear loud pinging or knocking, the
engine is prob

Page 347 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Maintenance
47
WARNING 
Be careful when checking your
engine coolant level when the
engine is hot. Scalding hot coolant
and steam may blow out under
pressure. This could cause burns
or other serious i

Page 355 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Maintenance
12
7
G050700AUN
Vacuum crankcase ventilation
hoses
Inspect the surface of hoses for evidence
of heat and/or mechanical damage. Hard
and brittle rubber, cracking, tears, cuts,
abrasions, an

Page 358 of 429

HYUNDAI VERACRUZ 2012  Owners Manual 715
Maintenance
G060200AEN-EU
Changing the engine oil and filter
Have engine oil and filter changed by an
authorized HYUNDAI dealer according to
the Maintenance Schedule at the begin-
ning of this sec

Page 359 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Maintenance
16
7
Check the condition and connections of
all cooling system hoses and heater
hoses. Replace any swollen or deterio-
rated hoses.
The coolant level should be filled
between F and L marks
Page:   < prev 1-8 9-16