2012 HYUNDAI VERACRUZ ignition

[x] Cancel search: ignition

Page 287 of 429

HYUNDAI VERACRUZ 2012  Owners Manual 527
Driving your vehicle
E070501AUN-EU
ESC operation
ESC ON conditionON, ESC and ESC OFF indi-
cator lights illuminate for
approximately 3 seconds,
then ESC is turned on.
 for at least half a second a

Page 288 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Driving your vehicle
28
5
E070503AEN-EU
Indicator light
When the ignition switch is turned ON,
the indicator light illuminates, then goes
off if ESC system is operating normally.
Type A
The ESC indica

Page 294 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Driving your vehicle
34
5
Each of these actions will cancel cruise
control operation (the SET indicator lightin the instrument cluster will go off), but itwill not turn the system off. If you wish tor

Page 296 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Driving your vehicle
36
5
 Remember, your vehicle does not
require extended warm-up. After the
engine has started, allow the engine to
run for 10 to 20 seconds prior to plac-
ing the vehicle in gear.

Page 304 of 429

HYUNDAI VERACRUZ 2012  Owners Manual Driving your vehicle
44
5
E120200AUN
Use high quality ethylene glycol
coolant
Your vehicle is delivered with high quality
ethylene glycol coolant in the cooling
system. It is the only type of coolant

Page 321 of 429

HYUNDAI VERACRUZ 2012  Owners Manual 63
What to do in an emergency
2. When the car is stopped, turn on youremergency hazard flashers, set the
parking brake and put the transaxle in
P (automatic transaxle).
3. Have all passengers get out

Page 322 of 429

HYUNDAI VERACRUZ 2012  Owners Manual What to do in an emergency
46
EMERGENCY STARTING
F040000AUN
Connect cables in numerical order and
disconnect in reverse order.
F040100AEN
Jump starting  
Jump starting can be dangerous if done
incorre

Page 326 of 429

HYUNDAI VERACRUZ 2012  Owners Manual What to do in an emergency
86
✽
✽NOTICE
If the TPMS and Low Tire Pressure
indicators do not illuminate for 3
seconds when the ignition switch is
turned to the ON position or the
engine is running,