2012 Hyundai Genesis Coupe air conditioning

[x] Cancel search: air conditioning

Page 168 of 391

Hyundai Genesis Coupe 2012  Owners Manual 491
Features of your vehicle
D250300AUN-EU
Defogging logic
To reduce the possibility of fogging up
the inside of the windshield, the air intake
is controlled automatically according to
certain conditi

Page 203 of 391

Hyundai Genesis Coupe 2012  Owners Manual Features of your vehicle
126
4
■Talking on the Phone
When talking on the phone, “Active Calls”
message and the other party’s phone
number (if available) are displayed on the
audio.

-
Press  b

Page 226 of 391

Hyundai Genesis Coupe 2012  Owners Manual 4149
Features of your vehicle
■Talking on the Phone
When talking on the phone, “Active Calls”
message and the other party’s phone
number (if available) are displayed on the
audio.
-
Press  but

Page 264 of 391

Hyundai Genesis Coupe 2012  Owners Manual 537
Driving your vehicle
 Remember, your vehicle does notrequire extended warm-up. After the
engine has started, allow the engine to
run for 10 to 20 seconds prior to plac-
ing the vehicle in gear. In

Page 285 of 391

Hyundai Genesis Coupe 2012  Owners Manual What to do in an emergency
66
IF THE ENGINE OVERHEATS
F050000ABK
If your temperature gauge indicates over-
heating, you experience a loss of power,
or hear loud pinging or knocking, the
engine is prob

Page 309 of 391

Hyundai Genesis Coupe 2012  Owners Manual 77
Maintenance
SCHEDULED MAINTENANCE SERVICE  
G030105AHM
At least once a year:
 Clean the body and door drain holes.
 Lubricate the door hinges and checks,and hood hinges.
 Lubricate the door and hoo

Page 313 of 391

Hyundai Genesis Coupe 2012  Owners Manual 711
Maintenance
NORMAL MAINTENANCE SCHEDULE (CONT.)
R : Replace I : Inspect and, after Inspection, clean, adjust, repair or replace if neces\
sary.
DESCRIPTION
7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 8

Page 317 of 391

Hyundai Genesis Coupe 2012  Owners Manual 715
Maintenance
G051600AUN
Brake fluid
Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” and “MAX” marks on the side of
the reservoir. Use only hydraulic
Page:   < prev 1-8 9-16 17-24 25-32 next >