2012 HONDA INSIGHT ignition

[x] Cancel search: ignition

Page 138 of 416

HONDA INSIGHT 2012 2.G Owners Manual The childproof door locks are
designed to prevent children seated
in the rear f rom accidentally opening
the rear doors. Each rear door has a
lock lever near the edge. With the
lever in the LOCK posit

Page 139 of 416

HONDA INSIGHT 2012 2.G Owners Manual µµ
The ceiling light and the door
activated spotlights come on when
you press the UNLOCK button if the
lights are in the door activated
position. If you do not open any door
or the hatch within 30

Page 140 of 416

HONDA INSIGHT 2012 2.G Owners Manual µAvoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperatures.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
r

Page 151 of 416

HONDA INSIGHT 2012 2.G Owners Manual Keeptheinsideandoutsidemirrors
clean and adjusted f or best visibility.
Be sure to adjust the mirrors bef ore
you start driving.
The inside mirror has day and night
positions. The night position reduc

Page 152 of 416

HONDA INSIGHT 2012 2.G Owners Manual The outside mirrors are heated to
remove fog and frost. With the
ignition switch in the ON (II)
position, turn on the heaters by
pressing the rear window def ogger
button. The indicator in the button

Page 153 of 416

HONDA INSIGHT 2012 2.G Owners Manual µ
Turn the ignition switch to the ON
(II) position to raise or lower any
window. To open a window, push the
switchdownandholdit.Releasethe
switch when you want the window to
stop. Pull back on the s

Page 154 of 416

HONDA INSIGHT 2012 2.G Owners Manual µ
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
bef ore closing it. The driver’s window auto
reverse

Page 161 of 416

HONDA INSIGHT 2012 2.G Owners Manual Your vehicle has an accessory power
socket in the f ront console panel.
To use an accessory power socket,
the ignition switch must be in the
ACCESSORY (I) or ON (II) position.
This socket is intended