2012 HONDA CROSSTOUR ECU

H O M E L I N K®( i f e q u i p p e d )
The HomeLink Universal Transceiver can be programmed to operate up to three
remote\bcontrolled devices around your home, such as garage doors, lighting, or home
security systems.
Press and hold thebutton on the
remote and the HomeLin kbutton at
the same time. Th en, while
continuing to hold the HomeLink
button, press and release thebutton
on the remote every 2seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Pressthe “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, pressand
hold the programmed HomeLink
button for 2 seconds.a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355\b35\f5, or
visit www.homelink.com .
R E V E R S E T I L T D O O R M I R R O R S ( i f e q u i p p e d )
When you shift into Reverse (R), you can tilt either outside door mirror down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
How It Works
• To tilt the driver’s door
mirror, movethe
mirror selector switch
to the left (L) position.
• To tilt the passenger’s side door mirror, move
the mirror selector
switch to the right (R)
position.
• To turn the feature off, move the switch to the
middle position.
1011
12 Crosstour TRG\fATG_NEW STYLE \b/30/2011 9\f44 AM Page 7

H I D D E N R E M O V A B L E U T I L I T Y B O X
Removable and washable utility box provides extra storage and access to tool kit and jack.
Removing the Utility Box
F U E L F I L L D O O R
Opening the Fuel Fill Door
When youunlockthe driver’s door,
the fuel door unlocks.
To open, push and release the fuel
door in the area shown until it pops
open.
Closing the Fuel Fill Door
Push the fuel door until it is flush
with the body.
Easy\bto\buse locking fuel door keeps your fuel cap secure.
When you lockthe driver’s door, the
fuel door locks.
NOTE\b If you lock the doors while
the fuel door is open, you must
unlock the doors to close the fuel
door. The utility box also includes two
removable dividers for added storage
options, located behind each handle.
\f.
Lift the removable tray using
the handle. 3.
Secure the anchors to the
designated hooks located on the
side panels.
2. Remove the side anchors attached
to the tray. 4.
Lift the utility box out from its
compartment using the side handles.
242\b
12 Crosstour TRG\fATG_NEW STYLE \b/30/2011 9\f4\b AM Page 14

Removing the Spare TireStoring the Flat Tire
\f.Open the tailgate. Raisethe
removable tray and flipit over so the
carpeted side faces you.
3. Remove the plastic cover on the cargo
area lining using your key to access the
bolt for the spare tire holder. 4.
Attach the short end of the wheel
nut wrench to the spare tire holder
bolt. Turn the wrench
counterclockwise until the bolt
loosens.
5. Attach the long end of the wrench,
and turn it approximately 70 times.
Stop when you feel resistance and can
see the spare tire under the vehicle.
NOTE\b Turning the wrench any
further may cause damage.
6. Unhook the spare tire holder, and
remove the spare tire. 8.
Turn the wrench clockwise to
retighten the bolt and raise the holder
back into place.
NOTE\b If the holder is not raised, it
will be damaged during driving. \f.
Remove the plastic bag from the
tool kit case, and placethe flat tire
inside. Knotthe top of the bag to
secure the tire.
2. Puncture the bag, and passthe
holding belt through and around
one of the tire spokes.
3. Place the flat tire in the cargo
area. Thread the belt through
the cargo hook. Passthe belt
through the ring, and tightenthe
belt to secure the flat tire in
place.
C O M P A C T S P A R E T I R ETemporary replacement tire located underneath the rear cargo area. Have your regular
tire repaired or replaced by your dealer as soon as possible.
2. Remove the hook, and hook it to the
cargo side panel to hold the tray in
place. Remove the utility box to access
the wheel nut wrench in the tool kit.
7. Place the spare tire holder back on
the hook.
NOTE\b Do not place the flat tire in
the spare tire holder. This can damage
the holder.
2627
12 Crosstour TRG\fATG_NEW STYLE \b/30/2011 9\f4\b AM Page 15

O W N E R L I N K
Owner Link allows you to explore features and technologies specific to your vehicle,
schedule service appointments, obtain and update maintenance and service records,
manage your financial services account, and access other useful information. Register
at owners.honda.com to ensure that you continue to enjoy the experience of owning a
Honda.
S A F E T Y R E M I N D E R
Your vehicle is equipped with airbags. Airbags do not replace seat belts; they add to
the protection offered by seat belts. Airbags can help protect you in some types of
collisions, but they do not provide protection in all collisions.
Always make sure you and your passengers wear seat belts, and that young children
are properly secured in a child seat or booster in the rear seat. Never place an infant
seat in the front passenger’s seat as the force of a deploying airbag can seriously
injure an infant.
F U E L R E C O M M E N D A T I O N
282\f
• Only use unleaded gasoline of 87 octane or higher.
• Some gasoline in North America contains MMT, a manganese\bbased fuel additive. Prolonged and consistent use of gasoline containing MMT can deteriorate your
vehicle’s performance, fuel economy, and the emissions control system. Always use
MMT\bfree gasoline if available. Failures caused by use of gasoline containing MMT may
not be covered under warranty.
• “TOP TIER Detergent Gasoline” meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today's advanced engines. In
most cases, qualifying gasoline retailers will identify their gasoline as having met “TOP
TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to
contain the proper level of detergent additives and be free of metallic additives. This
helps avoid build\bup of deposits in your engine and emission control system. Because
the level of detergency and harmful metallic additives (such as MMT) in gasoline vary
in the market, Honda endorses the use of “TOP TIER Detergent Gasoline” where
available to help maintain the performance and reliability of your vehicle. For more
information, visit www.toptiergas.com .
• For further important information on fuel and lubricants for your car and information on gasoline that does not contain MMT, contact your dealer or visit Owner Link at
owners.honda.com.
12 Crosstour TRG\fATG_NEW STYLE \b/30/2011 9\f4\b AM Page 1\b