2012 HONDA CROSSTOUR headlight bulb

Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
f rom contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.Open the hood.
To change a bulb on the
passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay.
Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustmentsshouldbedonebyyour
dealer or another qualif ied
technician.
1.
Headlight A iming
Replacing a Headlight Bulb
High Beam Headlight
Lights
344
STAYHalogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.

Maint enance

2012 Crosstour

Remove the electrical connector
f rom the bulb by pushing on the
tab to unlock it, then slide the
connector of f the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.Turn on the headlights to test the
new bulb.
Reinstall the engine coolant
reserve tank.
Push the electrical connector onto
the bulb. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
3. 2. 4.
5.
6.
CONT INUED
Passenger’s side
Lights
345
TAB
ELECTRICAL CONNECTOR
BULB

Maint enance

2012 Crosstour

To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
lef t, and turn of f the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Use a f lat-tip screwdriver to
remove the holding clip f rom the
inner f ender, and remove the
screw with a Phillips-head
screwdriver.Pull the inner f ender cover away
f rom the f ender and bumper.
Remove the electrical connector
f rom the bulb by pushing on the
tab to unlock it, then slide the
connector of f the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector onto
the bulb.
Turn on the headlights to test the
new bulb.
Put the inner f ender cover in place.
Install the holding clip. Lock it in
placebypushingonthecenter.
Tighten the screw securely.
3.
4.
5.
1.
2. 6.
7.
8.
9.
L ow Beam Headlight
Lights
346
BULB
TAB
SCREW HOLDING CLIP
ELECTRICAL CONNECTOR

Maint enance

2012 Crosstour

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Open the hood.
To change the turn signal bulb on
the passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay. To change a bulb on the driver’s side,
remove the fastener with a flat-tip
screwdriver, and remove the splash
separator by pushing the tab. Then
remove the duct.
1. 2.
3.
CONT INUED
Lights
Replacing a Front T urn Signal/
Parking L ight Bulb
347
STAYDUCT
TAB
BULB
SOCKET
SPLASH
SEPARATOR
FASTENER

Maint enance

2012 Crosstour

Install the new bulb and turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Reinstall the coolant reserve tank.Use a f lat-tip screwdriver to
remove the holding clip f rom the
inner f ender, and remove the
screw with a Phillips-head
screwdriver.
To change the bulb on the
driver’s side, start the engine,
turn the steering wheel all the
way to the right, then turn off the
engine. To change the bulb
on the passenger’s side, turn the
steering wheel to the left.
Reinstall the splash separator and
duct securely. Reinstall the
f astener and secure it by pushing
on the head until it locks.
6.
1.
7. 5. 4.
2.
Passenger’s side
Driver’s Side
Replacing a Front
Side Marker Light Bulb
Lights
348
SCREW HOLDING CLIP

Maint enance

2012 Crosstour

CONT INUED
Open the tailgate. Place a cloth on
the edge of the cover to prevent
scratches. Remove the covers by
caref ully prying on the edge with a
small f lat-tip screwdriver.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the inner f ender cover in place.
Install the holding clip. Lock it in
placebypushingonthecenter.
Tighten the screw securely.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms. 5.
6.
7.
1.
3.
4. Replacing Rear Bulbs
Lights
349
SOCKET
COVER
BULB

Maint enance

2012 Crosstour

µ
µ
µ Î
Î
Î
Î
Î
Î
Î Î
Î
Î Î Î
Î
Specif ications
403
Fuses
Battery Tires
Lights
Alignment Interior
Under-hood
8W 60 W (HB3)
55 W (H11)
24/2 2 CP
5W
55 W
21 W
21 W
21/5 W
5W
8W 225/65R17 102T
Replacement of a light bulb should be done by your dealer.
Capacity 12 V
12 V 72 AH/20 HR
60 AH/5 HR See page
395or the fuse label
attached on the side panel.
See page 396or the fuse label
attached to the inside of the fuse
box door.
See page 394or the fuse box
cover.
225/60R18 100H
Size
Pressure T155/90D16 110M
T155/90D17 101M
32 psi (220 kPa , 2.2 kgf/cm
)
1.4 W 3.8 W
5W 3.8 W
Headlights
Front turn signal/parking lights
Front side marker lights
Front Fog lights
Rear turn signal lights
Back-up lights
Stop/taillights
License plate lights
High-mount brake light
Ceiling light
Spotlights
Glove box light
Courtesy light (Ceiling)
Cargo area lights
Front door courtesy lights
Vanity mirror lights
Toe-in
Camber
Caster3°30’1°
0°
0.08 in (2.0 mm) 0.00 in (0.0 mm)
60 psi (420 kPa , 4.2 kgf/cm
)
33 psi (230 kPa , 2.3 kgf/cm)
High
Low
Front
Rear
Front
Rear
Front
Driver’s side
Passenger’s side
1:
2:
3:
4: EX
EX-L
2WD
4WD
(Amber)
(H11) (Amber)
LED type
LED type
: Front/Rear
Spare
Front/Rear
Spare
1
2
4 3 3
4

Technical Inf ormation

2012 Crosstour

CONT INUED
....................................
Accessories .292
ACCESSORY ...............
(Ignition Key Position) . 79
............
Accessory Power Sockets . 114
..................
Active Head Restraints . 96
....................
Additives, Engine Oil . 334
...........................
Advanced Airbags .25
...............................
Airbag (SRS) .9, 21
..........
Airbag System Components . 21
..............
Air Conditioning System . 126
.........................................
Usage .127
.......................
Air Pressure, Tires .359
......................................
Antif reeze .337
Anti-lock Brakes (ABS) ...............................
Indicator .58, 309
...................................
Operation .309
..............
Anti-thef t, Audio System . 239
.
Anti-thef t Steering Column Lock . 79
..............................
Audio Antenna .355
................................
Audio System .134
.....
Auto Door Locking/Unlocking . 81
...
Automatic Seat Belt Tensioners . 19
.............
Automatic Speed Control . 246..............
Automatic Transmission . 302
..........................
Capacity, Fluid .402
.......................................
Shif ting .302
Shif t Lever Position ...............................
Indicators .302
................
Shif t Lever Positions . 302
....................
Shif t Lock Release . 305
......................
Auxiliary Input Jack .236
Battery Charging System ...........................
Indicator .56, 386
............................
Jump Starting .382
..............................
Maintenance .367
............................
Specif ications .403
..............................
Bef ore Driving . 281
....................................
Belts,Seat .8,18
.........................
Beverage Holders .114
........
HandsFreeLink. 253
..................................
Booster Seats .48
Brakes ...........
Anti-lock System (ABS) . 309
.............
Break-in, New Linings . 282
....................
Bulb Replacement .349 ...........................................
Fluid .342
.......................................
Parking .112
.................
System Indicator . 57,388
........................
Wear Indicators .308
.............................
Braking System .308
.................
Break-in, New Vehicle . 282
..
Brightness Control, Instruments . 73
Bulb Replacement ..........................
Back-up Lights .349
..............................
Brake Lights .349
.................................
Fog Lights .351
................
Front Parking Lights . 347
.................................
Headlights .344
................................
Rear Lights .349
............................
Specif ications .403
............
Turn Signal Lights . 347,349
......................
Bulbs, Halogen .344, 351
............................
Capacities Chart .402
.............
Carbon Monoxide Hazard . 51
..........................
Cargo Area Light .122
.............................
Carrying Cargo .294Bluetooth
Index
A
BC
I


2012 Crosstour