2012 HONDA CR-Z hood release

Visual Index
4
Quick Reference Guide
❙Passenger's Front Airbag (P 44)❙Driver's Front Airbag (P 44)
❙Driver’s Door Lock Switch (P 102)
❙Door Mirror Controls (P 118)
❙Hood Release Handle (P 246)
❙Interior Fuse Box (P 305)
❙Power Door Lock Master Switch (P 102)
❙Power Window Switches (P 107)
❙Shift Lever
Automatic Transmission (CVT)
(P 203) Manual Transmission (P 208)
❙Glove Box (P 125)
❙Auxiliary Input Jack (P 138)
❙Center Pocket
❙USB Adapter Cable (P 127)
❙Accessory Power Socket
(P 127)
❙Parking Brake (P 220)

Visual Index
6
Quick Reference Guide
❙Maintenance Under the Hood (P 245)
❙Windshield Wipers (P 113, 266)
❙Door Lock/Unlock
Control (P 100)
❙Headlights
(P 110, 258)
❙Front Turn Signal/Parking/
Side Marker Lights (P 110, 262)
❙Tires
(P 269, 287)
❙Fog Lights *
(P 112)❙Rear License Plate Light (P 265)
❙Brake/Taillights
(P 264)
❙Back-Up Lights (P 263)
❙Rear Turn Signal Lights (P 263)
❙Rear Side Marker Lights (P 264)
❙High-Mount Brake Light (P 265)
❙How to Refuel
(P 233)
❙Rear Wiper (P114,268)
❙Opening/Closing the Hatch (P 104)
❙Hatch Release
(P104)
❙Side Turn Signal Lights (P 110, 262)
❙Door Mirrors
(P 118)

22
Quick Reference Guide
Maintenance (P237)
Under the Hood (P245)
● Check engine oil, engine coolant, and window washer fluid. Add when necessary.
● Check transmission fluid (CVT).
● Check brake fluid and clutch fluid.
● Check the 12 volt battery regularly.
a Pull the hood release handle under the corner of the
dashboard.
b Locate the hood latch lever, pull the lever up, and lift up
the hood.
c When finished, close the hood and make sure it is firmly
locked in place.
Lights (P258)
● Inspect all lights regularly.
Wiper Blades
(P266)
● Replace blades if they leave streaks
across the windshield.
Tires (P269)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter driving.

246
uuMaintenance Under the HooduOpening the Hood
Maintenance
Opening the Hood1.Park the vehicle on a level surface, and set
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard.
uThe hood will pop up slightly.
3. Push up the hood latch lever in the center
of the hood to release the lock mechanism,
and open the hood.
4. Remove the support rod from the clamp
using the grip. Mount the support rod in
the hood.
When closing, remove the support rod, and
stow it in the clamp, then gently lower the
hood. Remove your hand at a height of
approximately 12 inches (30 cm) and let the
hood close.
1Opening the Hood
NOTICE
Do not open the hood when the wiper arms are raised.
The hood will strike the wipers, and may damage
either the hood or the wipers.
When closing the hood, check that the hood is
securely latched.
If the hood latch lever moves stiffly, or if you can
open the hood without lifting the lever, the latch
mechanism should be cleaned and lubricated.
Do not open the hood while the Auto Idle Stop
function is activated.
Hood Release
Handle
Pull
Lever
Support Rod
Grip
Clamp