2012 HONDA ACCORD tire pressure

[x] Cancel search: tire pressure

Page 326 of 449

HONDA ACCORD 2012 8.G Owners Manual The VSA system cannot enhance the 
vehicle’s driving stability in all
situations and does not control your 
vehicle’s entire braking system. It is 
still your responsibility to drive and
corner at

Page 328 of 449

HONDA ACCORD 2012 8.G Owners Manual Your vehicle is equipped with a tire 
pressure monitoring system (TPMS)
that turns on every time you start the
engine and monitors the pressure in
your tires while driving.When the low tire pressure i

Page 329 of 449

HONDA ACCORD 2012 8.G Owners Manual For example, if you check and f ill 
your tires in a warm area, then drive
in extremely cold weather, the tire
pressure will be lower than
measured and could be underinf lated
and cause the low tire p

Page 330 of 449

HONDA ACCORD 2012 8.G Owners Manual As required by the FCC:This device complies with Part 15 of the
FCC rules. Operation is subject to thef ollowing two conditions: (1) This device may not cause harmf ul interf erence, and(2) this devic

Page 345 of 449

HONDA ACCORD 2012 8.G Owners Manual ̵µ µ
µ
µ
µ
U.S. Vehicles:
However, service at a dealer is not 
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualif ied service f acility or
person who is

Page 377 of 449

HONDA ACCORD 2012 8.G Owners Manual Keeping the tires properly inf lated 
provides the best combination of
handling, tread lif e, and riding
comf ort.Underinf lated tires wear unevenly,
adversely affect handling and fuel
economy, and ar

Page 378 of 449

HONDA ACCORD 2012 8.G Owners Manual Î Î
ÎÎ
The following chart shows the 
recommended cold tire pressures f or
most normal driving conditions.
If you check air pressures when the
tires are hot (driven f or several
miles/kilomete

Page 379 of 449

HONDA ACCORD 2012 8.G Owners Manual Your tires have wear indicators 
molded into the tread. When the
tread wears down, you will see a 1/2
inch (12.7 mm) wide band across the
tread. This shows there is less than 
1/16 inch (1.6 mm) of tr