2012 HONDA ACCORD COUPE instrument panel

[x] Cancel search: instrument panel

Page 288 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual Because the level of detergency and
additives in gasoline vary in the
market, Honda endorses the use of
‘‘TOP TIER Detergent Gasoline’’
where available to help maintain the
perf ormance and re

Page 307 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual Youshoulddothefollowingchecks
and adjustments bef ore you drive
your vehicle.Make sure all windows, mirrors,
and outside lights are clean and
unobstructed. Remove f rost, snow,
or ice.
Check that the

Page 312 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual These indicators on the instrument
panel show which position the shif t
lever is in.The ‘‘D’’ indicator comes on f or a
f ew seconds when you turn the
ignition switch to the ON (II)
position.

Page 318 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual ´
µ
´
µ
CONT INUED
Each time you pull (right), the
transmission shif ts to a higher gear.
Pull (lef t) to downshif t. You will
see the selected gear number on the
instrument panel. Downshiftin

Page 323 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual Always use the parking brake when
you park your vehicle. Make sure
the parking brake is set f irmly, or
your vehicle may roll if it is parked
on an incline.
If your vehicle has an automatic
transmissi

Page 338 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual CONT INUED
If the automatic transmission f luid
temperature increases and exceeds
the specif ied limit, the transmission
will also automatically downshif t to
the first gear even with the
Sequential S

Page 346 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual CONT INUED
The maintenance item code or codes
indicate the main and sub items
required at the time of the oil change
(see page ).
You can switch the information
display f rom the engine oil lif e
disp

Page 402 of 454

HONDA ACCORD COUPE 2012 8.G Owners Manual In this case, the starter motor’s
speed sounds normal, or even f aster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.Are you using the prope
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 next >