2012 GMC SAVANA PASSENGER oil pressure

[x] Cancel search: oil pressure

Page 143 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (29,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
Instruments and Controls 5-29
DIC Operation and Displays
The DIC has different displays
which can be accessed by pressing
the DIC butt

Page 146 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (32,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
5-32 Instruments and Controls
When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See

Page 150 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (36,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
5-36 Instruments and Controls
ENGINE OVERHEATED STOP
ENGINE
Notice:If you drive the vehicle
while the engine is overheating,
severe en

Page 267 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (1,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
Vehicle Care 10-1
Vehicle Care
General Information
General Information . . . . . . . . . . 10-2
California Proposition65 Warning . . .

Page 273 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (7,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
Vehicle Care 10-7
A.Battery on page 10‑30.
B. Radiator Pressure Cap. See Cooling System on page 10‑18.
C. Coolant Recovery Tank. Se

Page 321 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (55,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
Vehicle Care 10-55
Bead:The tire bead contains
steel wires wrapped by steel
cords that hold the tire onto
the rim.
Bias Ply Tire
:A pn

Page 359 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (93,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
Vehicle Care 10-93
Notice:Avoid using high
pressure washes closer than
30 cm (12 in) to the surface of the
vehicle. Use of power washe

Page 362 of 424

GMC SAVANA PASSENGER 2012  Owners Manual Black plate (96,1)GMC Savana Owner Manual - 2012 - 2nd - 11/11/11
10-96 Vehicle Care
Use a soft bristle brush to remove
dust from knobs and crevices on the
instrument cluster. Using a mild
soap soluti
Page:   < prev 1-8 9-16 17-24 next >