2012 FORD TRANSIT CONNECT ECU

[x] Cancel search: ECU

Page 1 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual Introduction 4
Instrument Cluster 14
Warning lights and chimes 14
Gauges 19
Entertainment Systems 23
AM/FM stereo 23
AM/FM stereo with CD 26
Auxiliary input jack (Line in) 33
USB port 35
Bluetooth sys

Page 10 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual CELL PHONE USE
The use of Mobile Communications Equipment has become increasingly
important in the conduct of business and personal affairs. However,
drivers must not compromise their own or others’

Page 16 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual Safety belt:Reminds you to fasten
your front driver and passenger
safety belt. A Belt-Minderchime
will also sound to remind you to
fasten your safety belt. Refer to the
Seating and Safety Restraintsc

Page 35 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual Troubleshooting:
1. Do not connect the audio input jack to a line level output. Line level
outputs are intended for connection to a home stereo and are not
compatible with the AIJ. The AIJ will only w

Page 65 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual TILT AND TELESCOPE STEERING COLUMN
Release the locking lever to adjust
the height of the steering wheel and
its distance from the driver.
Return the lever to its original
position to secure the wheel.

Page 76 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual KEYS
The key operates all locks on your vehicle. You should always carry a
second key with you in a safe place in case you require it in an
emergency.
If your vehicle is equipped with the SecuriLockp

Page 77 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual OPENING THE SLIDING DOOR
Note: the right-hand sliding door is inhibited from opening fully
when the fuel filler flap is unlocked and open.
REMOTE ENTRY SYSTEM (IF EQUIPPED)
This device complies with p

Page 78 of 299

FORD TRANSIT CONNECT 2012 1.G Owners Manual The typical operating range for your remote entry transmitter is
approximately 33 feet (10 meters). A decrease in operating range could
be caused by:
•weather conditions,
•nearby radio towers,
•
Page:   1-8 9-16 17-24 25-32 33-40 ... 40 next >