PERFORMANCE GAUGES
Your vehicle may be equipped with a dash mounted gauge pack that
contains oil pressure, engine coolant temperature, and performance
gauges.
WARNING:The performance gauge function should only be
used while in a track environment. The driver’s primary
responsibility is the safe operation of their vehicle, only use this
feature when it is safe to do so.
Oil pressure gauge- measures oil
pressure from 0-100 psi (0-689 kPa)
Note:It is normal for the oil
pressure to read high (80 -100 psi)
(551 - 689 kPa) during a cold start
and may exceed 100 psi (689 kPa)
in some conditions. The oil pressure
gauge needle may also move quickly
back and forth (flutter) in some
conditions.
Engine coolant temperature
gauge- measures engine coolant
temperature 100-260°F (38-127°C).
Note:It is normal for the engine
temperature needle to NOT point at
12 o’clock for stabilized driving.
Boss302 Unique Features
9
2012 05+ Mustang(197)
Supplement, 2nd Printing
USA(fus)
TRACK PREPARATION
The Boss302 and Boss302 Laguna Seca edition have been rigorously
proven out on race tracks. Below are recommendations for optimizing
your Boss302 for a track day event.
•For optimal performance, premium fuel is recommended.
•
Change brake fluid to Super DOT 4 to improve track performance of
braking system (WSS-M6C65-A2), Ford part number (YS4Z-19542-AA).
•Install Ford Racing front brake cooling kit (M-2004-MB) to improve
brake cooling (standard on Laguna Seca edition).
•Remove rear brake dust shields to improve brake cooling.
•Install Ford Racing transmission cooling scoop (M-5025-MBR) to
improve transmission cooling (standard on Laguna Seca edition).
•During extended track sessions in extreme temperatures or
conditions, your Boss 302 may require additional engine cooling
actions. If the water temperature warning light illuminates, return to
the paddock and let the vehicle return to normal operating
temperature while idling before turning the engine off. Prior to the
next session, remove your Boss 302’s upper grille from the front
fascia. This will allow more cooling air to the radiator and allow the
car to run extended sessions in extreme heat. Visit fordracing.com for
additional parts to further enhance the powertrain cooling on your
Boss 302.
•For extended track use, Ford recommends installing a rear differential
cooler to improve rear axle cooling.
•Remove vertical rear tire spoilers at rear edge of rocker moldings.
•The Ford Racing front splitter kit (M-16601-MB, standard on Laguna
Seca edition) can be installed to improve high-speed vehicle stability
and handling. If the Ford Racing front splitter kit will be installed on a
Boss 302 without the Laguna Seca package, Ford recommends
installing the Laguna Seca edition rear spoiler in place of the standard
rear spoiler to maintain aerodynamic balance. This front splitter is
intended for race track use only and is not legal for on-street driving.
It may degrade crash performance and void the vehicle warranty. The
front splitter must be installed by the customer.
Track Use Preparation
37
2012 05+ Mustang(197)
Supplement, 2nd Printing
USA(fus)
