2012 FORD FUSION HYBRID spare wheel

[x] Cancel search: spare wheel

Page 208 of 347

FORD FUSION HYBRID 2012  Owners Manual TIRE PRESSURE MONITORING SYSTEM (TPMS)
Each tire, including the spare (if
provided), should be checked
monthly when cold and inflated to
the inflation pressure recommended
by the vehicle manufacturer

Page 209 of 347

FORD FUSION HYBRID 2012  Owners Manual following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
WARN

Page 210 of 347

FORD FUSION HYBRID 2012  Owners Manual To restore the full functionality of the tire pressure monitoring system,
have the damaged road wheel/tire repaired and remounted on your
vehicle. For additional information, refer toChanging tires wi

Page 211 of 347

FORD FUSION HYBRID 2012  Owners Manual Low tire
pressure
warning lightPossible cause Customer action required
Flashing
warning lightSpare tire in use Repair the damaged road wheel/tire
and reinstall it on the vehicle to
restore system func

Page 258 of 347

FORD FUSION HYBRID 2012  Owners Manual The components are coded as follows:
Relay Location Relay Type Function
1 — Not used
2 — Not used
3 High current
microBlower motor
4 High current
microRear window defogger
5 High current
microPowe

Page 259 of 347

FORD FUSION HYBRID 2012  Owners Manual Dissimilar spare tire/wheel information
WARNING:Failure to follow these guidelines could result in an
increased risk of loss of vehicle control, injury or death.
If you have a dissimilar spare tire/wh

Page 260 of 347

FORD FUSION HYBRID 2012  Owners Manual 3.Full-size dissimilar spare without label on wheel
When driving with the full-size dissimilar spare tire/wheel,do not:
•Exceed 70 mph (113 km/h)
•Use more than one dissimilar spare tire/wheel at

Page 261 of 347

FORD FUSION HYBRID 2012  Owners Manual Removing the spare tire and jack
1. Remove the carpeted load floor
panel located in the rear of the
vehicle and remove the lug wrench
and long bolt from the tool bag.
2. Remove the bolt securing the
s
Page:   < prev 1-8 9-16 17-24 next >