2012 FORD FOCUS battery

SETTING 911 ASSIST™ ON
Before setting this feature on, ensure that you read the911 Assist™
privacy noticelater in this section for important information.
1. Press
> SYNC Apps. > 911 Assist.
2. Select ON.
You can also access 911 Assist by:
•Pressing Menu > Settings> Phone > 911 Assist or
•Pressing Menu > Help > 911 Assist.
Note:SYNC911 Assist™ feature must be set on prior to the
incident.
To ensure that 911 Assist™ works properly:
•SYNCmust be powered and working properly at the time of the
incident and throughout feature activation and use.
•SYNC911 Assist™ feature must be set on prior to the incident.
•ABluetoothenabled and compatible phone has to be paired and
connected to SYNC.
•A connectedBluetoothenabled phone must have the ability to
make and maintain an outgoing call at the time of the incident.
•A connectedBluetoothenabled phone must have adequate
network coverage, battery power and signal strength.
•The vehicle must have battery power and be located in the U.S.,
Canada or in a territory in which 911 is the emergency number.
WARNING:Unless the 911 Assist™ setting is set on prior to a
crash, the system won’t dial for help which could delay response
time, potentially increasing the risk of serious injury or death after a
crash.
WARNING:Don’t wait for 911 Assist™ to make an emergency
call if you can do it yourself. Dial emergency services
immediately to avoid delayed response time which could increase the
risk of serious injury or death after a crash. If you don’t hear 911
Assist™ within five seconds of the crash, the system or phone may be
damaged or non-functional.
Information features
52
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

IN THE EVENT OF A CRASH
Not all crashes deploy an airbag or activate the fuel pump shut-off
(which would activate 911 Assist™); however, if 911 Assist™ is
triggered, SYNCwill try to contact emergency services. If a connected
phone is damaged or loses connection to SYNC, SYNCwill search for,
and try to connect to, any available previously paired phone and try to
make the call to 911.
Before making the call:
•SYNCprovides a short window of time (about 10 seconds) to
cancel the call. Failure to cancel the call will result in SYNC
attempting to dial 911.
•SYNCwill say the following, or a similar message: “SYNCwill
attempt to call 911, to cancel the call, press Cancel on your screen
or press and hold the phone button on your steering wheel.”
If the call is not cancelled and a successful call is made, a prerecorded
message will be played for the 911 operator, then the occupant(s) in the
vehicle will be able to talk with the operator. Be prepared to provide
your name, phone number and location immediately, because not all 911
systems are capable of receiving this information electronically.
911 Assist™ may not work if:
•Your cell phone or 911 Assist™ hardware was damaged in a crash.
•The vehicle’s battery or SYNC system has no power.
•The phone(s) paired and connected to the system was thrown
from the vehicle.
•Note:Every phone operates differently. While SYNC911 Assist™
works with most cell phones, some may have trouble using this
feature.
WARNING:Always place your phone in a secure location in the
vehicle so it doesn’t becoming a projectile or get damaged in a
collision. Failure to do so may cause serious injury to someone or
damage the phone which could prevent 911 Assist™ from working
properly.
Information features
53
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

ACCESSING AND USING YOUR MENU FEATURES
Under the menu setting, you can set your clock, access and make
adjustments to the display, sound and vehicle settings as well as access
settings for specific modes or the help feature.
SETTING THE CLOCK
1. Press MENU > Clock.
2. Press + and — to adjust the time.
From this screen, you can also access other adjustments such as 12 or
24 hour mode, to activate GPS time synchronization, and to have the
system automatically update new time zones.
Once you update any settings they will be automatically saved.
Note:The date will be set by your vehicle’s GPS. You cannot manually
set the date.
Note:After a battery disconnect, your vehicle will need to acquire a GPS
signal to update the clock. A GPS signal can be received in an open sky
area. Once your vehicle acquires the signal, it may take a few minutes
for the update to display the correct time.
DISPLAY SETTINGS
Your touchscreen system allows you to make adjustments to the
touchscreen display. To access:
1. Press Menu > Display.
2. Choose to adjust any of the following:
•Brightness•Mode: Auto, Day or Night
•Auto Dim on/off•Edit Wallpaper
Menu
Clock Display Sound VehicleSettings Help
Menu features
56
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)