2012 FORD FOCUS USB

* If you have said you would like to Browse your USB or SD card, the
system will prompt you to specify what you would like to browse. When
prompted, you may say any of the following commands:
**Note:These commands are only available in USB mode and are device
dependent.
•Genre •All Genres
•All Playlists•Playlist
•Artist •All Artists
•Album •All Albums
•Author •All Authors
•Composer •All Composers
•Audiobook •All Audiobooks
•Podcast •All Podcasts
•Video **•All Videos**
•Video Playlist **•All Video Playlists**
•TV Show •All TV Shows
•All Movies•Video Podcast **
•All Video Podcasts**•All Music Videos**
•Folder •All Folders
•All Songs
**Note:These commands are only available in USB mode and are device
dependent.
Supported media players, formats and metadata information
SYNCis capable of hosting nearly any digital media player, including
iPod, Zune™, “Plays from device” players, and most USB drives.
Supported audio formats include MP3, WMA, WAV and AAC.
SYNCis also able to organize and sort your indexed media from your
playing device by metadata tags. Metadata tags are descriptive software
identifiers embedded in your media files which provide information about
the media file.
If your indexed media files contain no information embedded in these
metadata tags, SYNCmay classify the empty metadata tags as
Unknown.
Media features
33
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

In order to playback video from your iPod/iPhone(if
compatible),you MUST have a special combination USB/RCA composite
video cable (available for purchase from Apple). Once the cable is
connected to your iPod/iPhone, plug in the other end into both the
RCA jacks and the USB port.
BLUETOOTH AUDIO
Your system allows you to stream audio over the vehicle speakers from
your connected,Bluetoothenabled cellular phone.
To access, press the lower left corner on the touchscreen. Then, select
theBTtab.
Voice commands for Bluetooth Audio
While listening toBluetoothstereo, press
on the steering wheel
controls. When prompted, you may say any of the following commands:
Note:The following voice commands are only available if you have
turned on the IndexBluetoothAudio Device setting and if your device
supports indexing.
•Play Genre •Play Playlist
•Play Artist •Play Author
•Play Album •Play Composer
•Play Podcast •Play Folder
•Play Composer •Play Podcast Episode
•Play Audiobook •Play
•Pause•Next
•Previous•Repeat One
•Repeat All•Repeat Off
•Shuffle•Shuffle Off
•Play Similar Music•What’s this?
•Browse*•Play Song
Note:If your phone does not supportBluetoothmedia streaming, then
the following commands are the only commands that are valid:
•Play•Pause
•Previous•Next
Media features
34
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

To access,
1. Press the lower left corner of the touchscreen.
2. Then, selectA/V inputs.
To use the auxiliary input jack feature:Ensure that your portable
music player is designed to be used with headphones and that it is fully
charged. You will also need an audio extension cable with stereo male
1/8 in. (3.5 mm) connectors at one end and a RCA jack at the other.
1. Begin with the vehicle parked and the radio and portable device are
turned off.
2. Attach one end of the audio extension cable to the headphone output
of your player and the other end into the adaptor in one of the two left
A/V input jacks (white or red) inside the center console.
3. Press the lower left corner on the touchscreen. Select either a tuned
station from the FM tab or the CD tab (if there is a CD already loaded
into the system.) Adjust the volume to a comfortable listening level.
4. Turn the portable music player on and adjust the volume to 1/2 the
volume.
5. Press the lower left corner on the touchscreen. Select the A/V in tab.
(You should hear audio from your portable music player although it may
be low.)
6. Adjust the sound on your portable music player until it reaches the
level of the FM station or CD by switching back and forth between the
controls.
In order to playback video from your iPod/iPhone(if
compatible),you MUST have a special combination USB/RCA composite
video cable (available for purchase from Apple). Once the cable is
connected to your iPod/iPhone, plug in the other end into both the
RCA jacks and the USB port.
Troubleshooting:
•Do not connect the audio input jack to a line level output. The AIJ will
only work correctly with devices that have a headphone output with a
volume control.
•Do not set the portable music player’s volume level higher than is
necessary to match the volume of the CD or FM radio as this will
cause distortion and will reduce sound quality.
•If the music sounds distorted at lower listening levels, turn the
portable music player volume down. If the problems persists, replace
or recharge the batteries in the portable music player.
Media features
36
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

To access this screen using voice commands,presson your
steering wheel controls and when prompted, say, “Display settings”.
Uploading photos for your home screen wallpaper
Your system allows you to upload and view up to 32 photos.
To access:
1. Press Menu > Display > Edit Wallpaper.
2. Follow the system prompts to upload your photographs.
Note:You can NOT load photos directly from your camera. You MUST
access the photos from either your USB mass storage device or from an
SD card.
Photo display limitations:
•Compatible file formats are as follows: .jpg, .gif, .png, .bmp
•Each file must be 1.5 MB or less.
•Recommended dimensions: 800 x 378
•Only the photograph(s) which meet these conditions will be
displayed. Photographs with extremely large dimensions (i.e., 2048
x 1536) may not be compatible and will appear as a blank (black)
image on the display.
SOUND
Press Menu > Sound to access settings for:
•Bass
•Treble
•Midrange
•Balance and Fade
•THX Deep note demo (if equipped)
•DSP (if equipped)
•Occupancy mode (if equipped)
•Speed compensated volume
Menu features
57
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

Voice settings
Allows you to customize the level of system interaction, help and
feedback. To access:
1. Press Menu > Settings > Voice.
2. Select from the following:
Interaction mode:Standard interaction mode provides more
detailed interaction and guidance while the advanced mode has less
audible interaction and more tone prompts.
Confirmation prompts:Short questions asked by the system
when the system has not clearly heard or understood your request.
Note:Even with confirmation prompts turned off, you may be
asked to confirm settings occasionally.
Media Candidate lists:Candidate lists are possible results from
your voice commands. If these are turned off, the system will
simply make a best guess at your request.
Phone Candidate lists:Candidate lists are possible results from
your voice commands. If these are turned off, the system will
simply make a best guess at your request.
Voice control volume:Allows you to adjust the voice volume
level.
Media player settings
Allows you to customize how the system will interact with your phone,
USB drive and portable media player.
1. Press Menu > Settings > Media player.
2. Select from the following:
Autoplay on/off:With this feature on, the system will
automatically switch to the media source upon initial connection
and you can listen to music which has already been randomly
indexed during the indexing process. With this feature off, the
system will not automatically switch to the inserted media source.
Menu features
60
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

•Bluetooth on/off:Select to turnBluetoothon or off.
•Do not disturb:Select to have all calls go directly to your voice
mail and not ring in the vehicle cabin.Note:With this feature
turned on, text message notifications are also suppressed and will
not ring inside the cabin.
•911 Assist:Select to turn 911 Assist™ on/off. Refer to911
Assist™in theSYNCServices and Appschapter in this
supplement for complete information on this feature.
•Phone ringer:Allows you to select what you would like to hear
when you receive a call. Choose from possible system ring tones,
your currently paired phone’s ring tone, a beep, text to speech or if
you would like the notification to be silent.
•Text message notification:Allows you to select how you would
like to be notified when you receive a text message (if supported
by your phone). Select from possible system alert tones, text to
speech or silent.
•Internet Data Connection (if compatible):Use this screen to
make adjustments to your internet data connection. Select to make
your connection profile with the PAN (personal area network) or to
turn off your connection. You can also choose to make adjustments
to your settings, and have the system always connect, never
connect when roaming or query on connect.Note:Press ? for
additional information.
•Manage Phonebook:Select to access features such as
automatic phonebook download, to re-download your phonebook,
to add contacts from your phone as well as delete or upload your
phonebook.
•Display call history:Select to display call history.
Wireless & Internet
Your system is equipped with Wireless & Internet features and settings.
To access, press Menu > Settings > Wireless and Internet. From this
screen, you can select from:
•Wi-Fi settings•USB mobile broadband
•Bluetooth settings•Prioritize connection methods
Menu features
62
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

Wi-Fi
Your system has a Wi-Fi feature which creates a wireless network within
your vehicle, thereby allowing other devices (i.e. personal computers,
phones) in your vehicle to speak to each other, share files, play games,
etc. Using this Wi-Fi feature, everyone in your vehicle can also gain
access the internet if:
•You have a USB mobile broadband connection inside the vehicle
•Your phone supports PAN (personal area networking)
•You are parked outside of a wireless hotspot
To access, press Menu > Settings > Wireless and Internet > Wi-Fi
settings.
In the WiFi settings screen, select from the following options:
•Wi-Fi Network (Client) Mode On/Off: This will turn the Wi-Fi
feature on or off in your vehicle. Ensure that On is selected for
connectivity purposes.
•Choose a Wireless Network:Allows you to use a previously stored
wireless network. You can categorize by alphabetical listing, Priority
and Signal Strength. You can also choose to search for a network,
connect to a network, disconnect from a network, receive more
information, prioritize a network or delete a network.
•Search for Wireless Networks:Allows you to view a list of wireless
networks.
•Gateway Access Point Mode (On/Off):Turn this On to make SYNC
an access point for a phone or a computer. This forms the local area
network within the vehicle for things such as game playing, file
transfer, internet browsing, etc.
•Gateway Access Point Device List:Allows you to view who has
connected to your Wi-Fi connection recently.
Note:Press the ? button (if available) for additional information.
The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi
Alliance.
Menu features
63
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

USB mobile broadband
Instead of using Wi-Fi, your system can also use a USB mobile broadband
connection to access the internet. This screen allows you to set up what
will be your typical area for your USB mobile broadband connection. You
can select the following:
•Country
•Carrier
•Phone number
•User name
•Password
Note:You must activate your mobile broadband device on your PC prior
to connecting it to the system.
Note:USB mobile broadband settings may not be displayed if the device
is already activated.
Prioritize connection methods
This screen allows you to choose your connection methods and change
them as needed. You can select to Change Order and have the system
either always attempt to connecting using a USB mobile broadband or
using Wi-Fi.
Bluetoothsettings
This screen will show you what device is currently paired with the
system as well as giving you your typicalBluetoothoptions to connect,
disconnect, set as favorite, delete and add device.
Bluetoothis a registered trademark of the Bluetooth SIG.
HELP!
Your touchscreen system has a help feature which you can access at any
time.
To access:
1. Press Menu > Help.
2. From this screen you can access:
•Where am I?:Select to view the vehicle’s current location. If your
vehicle is equipped with navigation, you will see your location on a
map. If your vehicle is not equipped with navigation, or if your SD
card is not inserted, you will receive your vehicle’s latitude and
longitude.
Menu features
64
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)